Question about 1989 GMC K1500

1 Answer

Tune up specs on '89 5.7 GMC - 1989 GMC K1500

Posted by on

  • Garry Laing
    Garry Laing Apr 26, 2014

    Well it's plane to me and anyone else that would view this thread whose time was wasted!!! Your are without a doubt an IDIOT. And don't worry about any other people and the help that they need because YOU would be wasting their time with your answer of "Go get a Haynes Manual...." thereby just showing that you don't have a clue but as with most any SIMPLETON just can't pass up an opportunity to open your trap to put in your two cents worth!!! SIMPLETON.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • GMC Master
  • 450 Answers

Get a haynes repair manuel, worth every penny, just do it

Posted on Apr 22, 2014

Testimonial: "I know full well that Haynes or Chilton manuals contain this info! I did not want to spend the time or money to obtain manuals to get this little bit of info when someone with the knowledge could share it with me. This kind of response is not useful and is just stating the obvious."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque Specs for a water pump on a gmc envoy's bolts 2002


Pulley bolts are 18ft lbs. Waterpump attaching bolts are 89 inch pounds.

Jun 17, 2017 | 2002 GMC Envoy

1 Answer

Would like to have torque specs chart please?


Hi there, the following information are for a 2004 Grand Am 2.2L, I hope it helps:

--------------------------------------------------------------------------
Timing Chain, Sprockets, and/or Tensioner Replacement
--------------------------------------------------------------------------
Tighten the chain guide bolts to 10 N·m (89 lb in).
Tighten the chain tensioner bolts to 10 N·m (89 lb in).
Tighten the oil nozzle bolt to 10 N·m (89 lb in).
Timing chain tensioner guide bolt to 10 N·m (89 lb in).
Timing chain bolts to 10 N·m (89 lb in).
Chain guide plug to 90 N·m (66 lb ft).
Timing chain upper guide bolts to 10 N·m (89 lb in).
Timing chain tensioner to 75 N·m (55 lb ft).
Camshaft bolts to 85 N·m (63 lb ft) plus 30 degrees.
-------------------------------------------------------------------------
Intake Manifold Replacement
-------------------------------------------------------------------------
Manifold Nuts and Bolts: 10 N·m (89 lb in).

Aug 30, 2014 | 2004 Pontiac Grand Am

1 Answer

Need tune specs on '89 5.7 GMC


Spark plugs are set at 0.035 inch.
Ignition timing is set at 0 degrees BTDC. The computer then controls the timing from there. There will be a wire that you unplug before you set the timing, then once you have verified that the timing is at 0 degrees, then reconnect the wire and you're done.

Apr 22, 2014 | 1989 GMC K1500

1 Answer

89 gmc f150 v6 chugging out like its gona die


F150 is a Ford model truck, not GMC.
But at any rate, since I don't know if you have a Ford F150 of some kind, a 87 GMC S15 or some kind of 89 GMC with a V6 I will suggest taking the ignition module to an Auto Zone and having them test it (A free service). Also test the fuel pressure.
If a tune up and fuel filter has not been done in some time that could very well be an issue.

Sep 25, 2011 | 1987 GMC S-15 Pickup

1 Answer

Im replacing my intake manifold gasket in my 2000 GMC Jimmy.. What else should I do while im in this far?? Or is that enough?


BE VERY CAREFUL WHEN CLEANING CATCH ALL DEBRIE IN A RAG THIS WOULD BE A GOOD TIME FOR TUNE UP IF NEEDED. MAKE SURE YOU CLEAN CLEAN CLEAN IF THIS HAS 4.3 BE CAREFUL ON INTAKE TORQUE. CHANGE COOLANT IF OVER 60,000 ON VEH. WITH MANUFACTURE SPEC. COOLANT.

Feb 11, 2010 | GMC Jimmy Cars & Trucks

1 Answer

Not getting fuel to my 89 sierra, fuel pump has power. will not hit when i crank it


although fuel pump might be running it might not be pumping enough fuel chek fuel pressure at the rail and see if it meets factory specs if not replace if it does then you might have a problem with the injection circuit

Aug 12, 2009 | 1989 GMC C1500

1 Answer

Back fire


the fuel pump or the sparkplugs or both,check it out.
or
Could be in need of a tune up... carb and timming adjustment. New plugs,wires,rotor, dist cap.Tune ups are needed on a regular basis ussualy once a year depending on the amount of miles you put on the car? The charging system sounds o.k but tune up may be in order
or
Timing is way off specs, or plug wires hooked up incorrectly. I would suspect the latter.
Firing order 1-3-7-2-6-5-4-8
or also
if vacuum leak

Oct 24, 2008 | 1998 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...