Question about Cars & Trucks
Have you checked the fuse box ? there should be a list on the fuse box cover to say what fuse is what
Posted on Apr 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fuse # 20, located in the Junction Block (interior, drivers side). This is a ten amp fuse.
Read the information at the above site. The TSB (technical service bulletin) may be of interest to you.
Posted on Nov 20, 2008
SOURCE: heated seat not working
The heater element for the seat is broken or damaged....It will need to be replaced....The blinking light lets you know there is a problem and does not let power flow to the element. This is for safety reasons to prevent short out or even fire.
Posted on Feb 16, 2009
Page 43 in the document linked to below is a wiring diagram of the heated seats in an 850. If you're lucky some wires have come loose and are hanging under the seats, if you're unlucky you might have to do some shredding of the seats in order to replace broken parts. If so there is a fairly inexpensive repair kit made specifically for this purpose, but I don't have the part number available right now. Arm yourself with a multimeter and get to it!
Posted on May 30, 2009
SOURCE: Heated set will not work.
The elements that heat the seats have failed. you will need to replace these failed seat elements asap if possible. These elements are embedded in the actual seats.
Posted on Jun 13, 2009
SOURCE: FRONT HEATED SEATS
you need to check the resistance in each of the heated seat elements in the seat. There's a two wire connector under the back of each front seat. The connector should be green. disconnect it and measure the resistance along the circuit going into the seat. if it isnt .1 - .3 ohms, replace the appropriate heated seat element
Posted on Jan 06, 2010
Tips for a great answer:
Nov 12, 2012 | 2001 Hyundai Tiburon
Nov 03, 2012 | 2001 Pontiac Aztek
Dec 05, 2010 | 2001 Buick Regal
Jun 16, 2010 | 2001 Jeep Grand Cherokee
Jun 07, 2010 | 2001 Buick Regal
Jan 31, 2009 | 2002 Jeep Grand Cherokee
Dec 27, 2008 | 2001 Dodge Ram 2500 Truck
Dec 15, 2008 | Pontiac Montana Cars & Trucks
15 people viewed this question
Usually answered in minutes!