Question about 1996 Dodge Ram 1500 Club Cab

Open Question

Tighten driver side mirror on a 1997 Chevrolet S10

How to tighten a side mirror on a Cevrolet S10

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: How to tighten side mirror. 1996 dodge ram 1500 manual mirrors

take door pannal off there should be 3 bolts in the inside of the door where mirror sits unless its the reflection peace where you have to just get a new mirror

Posted on Jul 19, 2009

ourhowse
  • 2007 Answers

SOURCE: I have a 1997 Dodge Ram 1500 that I need to

I would think you would access it from inside the door panel, not under the cover.

Posted on Oct 31, 2009

alicantecoli
  • 22114 Answers

SOURCE: drivers outside rear view mirror is loose in the mount

look under the covers and their is either a screw or a bolt that will tighten the spring loaded cups

Posted on Jul 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A lose rear veiw mirror 99 s10


If its the windshield mirror, gm usually uses a phillips or torx head screw to tighten the mirror to the base, which is glued to the glass with a special adhesive. If the screw is tight and it's the mirror joints that are loose, replace the mirror. If it's the door mirror, the inner trim on the door needs to be removed to tighten the mounting bolts. If the outside foldaway joint is loose, you will probably need to replace the complete mirror.

Mar 08, 2013 | 1999 Chevrolet S-10 Pickup

1 Answer

How do you tighten the driver side mirror on a 1996 chevrlet blazer?


you need to pull the door panel off on the inside of the door, there you will find three bolts right behind the mirror. Simply tighten them back up

May 21, 2010 | 1996 Chevrolet Blazer

1 Answer

1994 chevy silverado driver side mirror is loose


try removing the black cover that wraps out from the door to the mirror just be carefull.....plastic ****.

Apr 25, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

The passenger mirror on my 2003 Toyota 4 Runner wobbles. How can I tighten down the mirror on the base?


With my 4 runner, I had the same problem. All I needed to do was use a phillips head screw driver and tighten up a screw that is underneath the mirror housing. i.e. there is a screw hole on under side of the hosing for the mirror. Find that hole and tighten (it may seem tight already, but just give it a little bit more torque and see if that helps)

Mar 18, 2010 | 2003 Toyota 4Runner

1 Answer

The glass in the driver side rear view mirror is loose. how do you tighten it up?


The driver and passenger side mirrors have a small rubber plug in the bottom center of the mirror housing. Remove the plug and there is a phillips head screw holding the mirror assembly. Tighten this screw about 1/8 turn and it will keep the mirror from moving around. If you remove the screw you can remove the mirror and drive motors. Use a bit of thread-lock to keep the screw from loosing again. Reinstall the rubber plug.

Jan 30, 2010 | 1991 Toyota Previa

1 Answer

How do i replace a drivers side mirror on a 2003 Chevy Cavalier


need to remove the door panel and cover to the mirror,remove nuts pull out mirror,then replace with other mirror tighten nuts, put covers back on,finist

Oct 28, 2009 | 2003 Chevrolet Cavalier

1 Answer

Driver side mirror loose how can i tighten it


Most mirrors have a removable cover just on the inside of the door. If you look closely where the mirror meets the door on the inside should be a snap in place cover or three screw holes with snap in covers that you remove and then use a screwdriver or small socket wrench to tighten the screws or bolts.

Joe

May 20, 2009 | 1993 Saturn SC1

1 Answer

Driver side mirror is loose and want stay in place, how do you tighten it?


You'll have to remove the door panel to access the screws which hold it on.

Apr 15, 2009 | 2001 Isuzu Rodeo

1 Answer

2006 ford focus driver side mirror (electric)


Not that hard on this model.Here is a pic of the mirror and the removal and installation proceedure.

http://i253.photobucket.com/albums/hh43/chuck943/N0025797.gif

  1. Remove the exterior mirror trim cover.
    1. Release the retaining clip.
    1. Disconnect the exterior mirror control switch electrical connector.
  1. Disconnect the exterior mirror electrical connector.
  1. Remove the exterior mirror bolt.
    • To install, tighten to 11 Nm (8 lb-ft).
  1. If equipped, remove the exterior mirror screw.
    • To install, tighten to 2 Nm (18 lb-in).
  1. Remove the exterior mirror.
  1. To install, reverse the removal procedure.

Mar 02, 2009 | 2001 Ford Focus

2 Answers

Rearview mirror fell off windshield


there is a small allenwrench bolt in the mirror back out the bolt and install then tighten back up

Dec 05, 2008 | 1997 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...