Question about Cars & Trucks

1 Answer

Front Axle nut size for 2010 GMC sierra 4wd - Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Should be a 35mm

Posted on Apr 22, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 566 Answers

SOURCE: front rotor nut

hi out of curiosity? are wanting to renew thebrake disc/rotor ? or the actual hub that rotor fits to ? as not usually necessary to have to remove hub to change rotor ? unless the rotor is bolted to hub from the rear ?

Posted on Nov 08, 2008

canbruce75
  • 1776 Answers

SOURCE: I need the torque spec for the axle and the axle

Go to the autozone.com website and register there. It doesn't cost anything and you will have access to an online repair manual for the vehicle. (Kinda handy) They have a specification section, so the torque specs might be found there. Hope this helps and best wishes.

Posted on Aug 18, 2009

Testimonial: "hey thanks for the help"

  • 198 Answers

SOURCE: 2004 gmc sierra rear differential

remove cover.take off back wheels and calipers (or drums).turn differential to where you see small bolt/pin (5/16) horizontally (same direction as axles)on right side of differential.remove bolt/pin.A large pin (about 5"long 3/4"diameter) should slide out differential with ease ( you may have to tap one side of the large pin).turn differential to completely remove large pin.turn differential so you can see in the view window.push each axles in (they'll go in about 1 1/2"each) You may hear one of the axle C-clips fall.If not use a small telescoping magnet to remove the C-clips from the axles through the differential window.pull each axle out about 10"so they are out of the diff.Now remove the cap bolts(4-5/8"bolts) and remove the caps(mark the caps so they go in excactly the way they came out.be careful the diff might fall out.If not you may have to use a long bar or 2x4 to wedge and pry the differential out. Have a basket/crate w/rags in it to catch the diff.TIP:If you are removing the ring gear from the diff, the bolts are left handed bolts meaning you have to turn them clockwise to loosen and counter clockwise to tighten ; )

Posted on Sep 15, 2009

Testimonial: "thank you helped ALOT perfect instructions "

  • 18 Answers

SOURCE: 2005 gmc sierra. Manual shift 4wd. After using

When you are finished with your 4 wheel drive,put the transmission in neutral, disengage 4 wheel drive and shift to reverse then back up a couple feet before shifting to forward gear.

Posted on Jan 15, 2010

  • 55 Answers

SOURCE: what size is the front axle nut on a 2006

32 or 34 mm

Posted on Sep 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1997 GMC Sierra lights for 4hi and 4lo blink when i push the 4hi button and then goes back into 2hi. but when i push 4lo it locks in and works fine. I tried changing the 4wd motor on the transfer c


THE TRANSFER CASE MOTOR IS ONLY FOR 4WD LOW. That would have never been the problem as soon as you confirmed it shifted into 4wd Low. 2wd and 4 Hi work off of vacuum. You may have one or two issues. A vacuum leak up by the front axle that engages the 4wd HI or the sensors on the transfer case.

Nov 22, 2013 | 1997 GMC Sierra

1 Answer

09 gmc canyon front hub nut size


Measure the nut in fractional size & divide by .0395
Then you will have your metric axle nut size.
34,36mm etc.

One would assume you work on your own vehicles,that you
have all the sockets, in 1/2" drive, from 10 thru 36mm

May 31, 2012 | 2009 GMC Canyon

1 Answer

I need the torque specs for a 99 GMC sierra k1500 wheel hub bolts (bearing), and axle nut bolts (front)


hub to steering knuckle 133 ft lbs.

axle nut 155 ft lbs.

lug nuts 140 ft lbs.

May 12, 2011 | 1998 Honda Civic

1 Answer

2005 GMC 4x4 HD 2500 6.0 eng. rear axel seal


SEAL COULD BE LEAKING CAUSE YOU DIDNT LUBRICATE THE SEAL LIPS WITH PETROLEUM JELLY TO HELP THE THE SEAL LIP SEAL OR YOU DAMAGE THE SEAL WHILE DRIVING IT IN.AXLE FLANGE NUTS TORQUE IS 58 FT LBS THE AXLE HUB NUT TORQUE IS 177 FT LBS.

Jul 14, 2010 | 2005 GMC Sierra 2500HD 4WD

1 Answer

Front diff not disengaging all the way


If you can verify the noise is coming from the front diff, try these two things. Back the actuator out some or completely remove it, only some fluid will leak if driven a short distance. If there is no change, use a pry bar and see how much play there is at the left front axle. Pry between something like the a-arm and the shaft of the axle or the frame and the flange of the axle. If there is excessive play, I've found the clips that hold the side bearings in adjustment sheer off and let the bearings have excessive play leading to bearing failure. The difference in the noise you hear could change because the axle goes from free wheeling to being driven. If the second description fits, all new bearings and seals should fix you up.

Dec 31, 2009 | 2003 GMC Sierra 2500HD

2 Answers

Replaceing hub assembly on 2004 gmc


Thats it ,oh and a hammer to knock it out of the knuckle.Some guys tighten the axle nut back up with a torque wrench.

Nov 29, 2008 | 2005 GMC Sierra 2500HD 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...