Question about 1987 Jaguar XJ6
My uncle is a mechanic and said it sounds like the belts are not tight enough. How do we tighten the belt? The battery cannot stay charged at all. We just bought a new one a week ago and already dead after the first day. Thanks for your insight!
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: jammed seat belt
bet the belt is twisted pull back the rubber door seal and remove the top buckle should be possible to remove the trim pull the belt all the way out and untwist go for it
Posted on Jan 06, 2009
SOURCE: Head lights, 04 X-Type Jaguar
I hope the God that you have not gone to the dealer to get this simple thing done.
Call me and I will do my best to coach you a process that should take you about 20 minutes the first time. my number is 407.718.6145
Posted on Feb 18, 2009
Pads will reproduce sound just like a needle on a phonograph. Hard linings will accentuate this. Have the rotors re-surfaced and finished with a non-directional pattern(I make a quick pass with a D/A sander over surfaces while still on the lathe) Generally this will help.
Posted on Mar 30, 2009
I have a 1995 xj6....same problem. I replaced the belts, water pump, and the alternator. Still does it. As I play with the tension on the belt (belt that drives water pump, alternator) it goes away and comes back. If I remove the belt, the metal to metal screech stops. I then, with just the belt, turned the main pulley on the front of the engine, and there was the sound! The main pulley has 2 belts that run on it. Also, 2 pulley tracks. They SHOULD move simultaneously and be super meshed. But the rear one moves on its own under tension until it warms up and I guess, the bushing maybe expands. Now.....how do I fix it??????
Posted on Nov 17, 2009
many things will cause no start problems could have faulty ignition switch.use test light see if power going to starter if not check ignition fuse to starter.if power going to starter, more likely starter solenoid or starter faulty.if ignition fuse okay and starter and solenoid okay still no start problem could be in the ignition switch or inhibitor switch faulty.code scan for faulty theft security system which will also cause no start conditions.
Posted on Oct 22, 2012
Tips for a great answer:
May 05, 2016 | Cars & Trucks
Feb 03, 2016 | Cars & Trucks
Jan 30, 2012 | Toyota Tercel Cars & Trucks
Jan 11, 2011 | Chevrolet Impala Cars & Trucks
Jul 25, 2010 | 2001 Mazda 626
Feb 27, 2010 | 1998 Ford Explorer
Sep 16, 2009 | 1990 Jeep Wrangler
Jan 16, 2009 | 1996 Jeep Grand Cherokee
Sep 16, 2008 | 1991 Toyota 4Runner
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: