Question about 1998 Toyota Caldina E

1 Answer

Engine turns over but fuel from the ijectors?

No fuel coming from yhe injectors

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Bad fuel pump, or fuel pump relay.

Posted on May 16, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is an ijector malfunction no 7

The number 7 cylinder fuel injector is not operating as designed. Check for power and injector pulse on the injector, if circuit is good suspect a bad fuel injector.

Feb 16, 2015 | 2002 Dodge Dakota Club Cab

1 Answer

What do rb25 ijectors look like

these are customised fuel injectors for selected vehicle /engines , they do need to be matched closely to a particular vehicle/engine or you may not get the optimum performance that the injectors are designed to give

Jun 09, 2014 | Nissan Cars & Trucks

1 Answer

Mazda diesel problems

check the fuel pump fuse and then the fuel solonoid for power and if power is pressent then check if solonoid is working if all is good then just crack each of the 17 mm nuts on ijector pipes to injectors and when fuel starts to bleed through then tighten

Dec 30, 2013 | Cars & Trucks

1 Answer

I have a 91 vette i replaced the injectors because it seamed like i was pullinga trailer after the new injectors were installed it wont start just turns over, i had replaced the pump prior, it will start...

The fuel pressure need to be 48psi to 55 psi. The fuel pressure has to be correct inorder for it to start you said you have fule pressure then we need to assume the pressure is good first check for power at the injector with key on engine off If you dont have power check the engine fuse box for a open fuel injector fuse replace if there is a open fuse , then check the ground signal that comes from the ECM this should be a on off ground signal Now you check this on left and right bank since your vehicle injector is bank fired . You will also need to check the injector relays there should be 2 one for left and one for right more than likely you have the ijector harness disconnected so follow the wire to its junction and make sure its realy connected not just looks connected

Aug 14, 2011 | 1991 Chevrolet Corvette

1 Answer

FIVE THOUSAND DOLLARS to fix fuel leakin from my injectors into my motor I THINK GM shoud be paying for this mistake

fuel injectors operate on a pulse from the computor. remove the fuel rail and insect the suspect injector 2 things will cause the injector to dump fuel.ethier the injctor has come apart at the end or the ijector is stuck open.hope that helps. you might be able to turn key on with
fuel and elect connentions to see which one is leaking

Feb 16, 2011 | GMC G2500 Cars & Trucks

2 Answers

My 2001 pontiac grand am all of a sudden quit running.went to start it wont start.changed spark plugs nothing.took off main fuel line right at fuel rail turned key gets plenty of gas.put carb cleaner in...

It depends on the # 1 ijector to fire then the rest follow,i u have test for injectors teat the 3 1 TO SEE WORKING PROPERLY,WHAT ELSE SOMETIMES ON GRANDAMS THE INGNITION SWITCH GOES OUT....

Aug 23, 2010 | 2001 Pontiac Grand Am SE

1 Answer

91 ford mustang 5.0 fuel pump and relay is working but the pump is not getting power

How do you know the fuel pump is not getting power?.The fuel pump only comes on for a second or two before cutting back off.The ecm only suppys power to the relay for a few short seconds with key in the on position.Only constant 12 volts is supplied when the engine is running.Is the fuel pump new?How do we know it is good?Also is the engine giving a spark when the engine is turning over?If the engine has no spark,then the pick up coil could be bad,otr the ignition module could be bad.Check the fuel at the injsctors or a fuel line to see if the fuel will pump out when the key is turned on,if it does not,then check to see if the ijectors are pulsing.If the injectors are not pulsing ,and you have spark,then remove the distributor and replace the pick up coil,and the ignition module.The pick up coil,along with the igniyion module give the injectors there pulse.One other thing,If the fuel pump is not for sure coming on,check to see if the relay is clicking on,and then off in a couple of seconds.If this is true,then replace the fuel pump.Any other questons,please ask,I will try to help if I can.I hope this was some help,let me know,thanks.

Sep 29, 2009 | 1991 Ford Mustang

1 Answer

Will not start,(but engine rotates)

make sure fuel is going to engine from injectors, you can try by adding carburetor cleaner to intake and crak it, if it runs for a little be then ijectors are not firing, some times the ignition module to control the spark will keep the injectors from firing

May 28, 2008 | 1993 Ford Escort 4 Door

Not finding what you are looking for?
1998 Toyota Caldina E Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides