Question about Cars & Trucks
Could be a bad switch or a ground fault. Unclip the wires(or terminal) from the switch and inspect the plug for a short. Replace the fuse and turn the ignition on with the switch unplugged. If the fuse still pops there is a ground fault somewhere else in the wiring.
Posted on Apr 21, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did you check all fuses after replacing everything? If you did not disconnect battery while replacement you may have blown fuse.
Posted on Oct 02, 2009
Testimonial: "Great. How can I find the location of the fuse?"
SOURCE: Replacing heater blower motor
this is not a problem with thw switch or motor. There is a resistor that is mounted inside the dash on the pasenger side that controls the speed of the blwer..these have a tendency to burn up after 10 years or so... replace the resistor, and you will be fine! http://cgi.ebay.com/ebaymotors/Toyota-Truck-A-C-Heater-Fan-Resistor_W0QQcmdZViewItemQQcategoryZ33548QQihZ016QQitemZ260344846266QQrdZ1QQsspagenameZWDVW#ht_500wt_1230
Posted on Jan 14, 2009
Tips for a great answer:
Jan 30, 2016 | 1977 Buick Electra
Jun 22, 2011 | 2003 Saab 9-3
May 29, 2011 | 1996 Saturn SL
Dec 27, 2010 | 2008 Volkswagen Rabbit
Jun 07, 2010 | 1998 Pontiac Grand Prix
Aug 31, 2009 | 2000 Ford Taurus
Mar 31, 2009 | 2000 Volkswagen Jetta TDI
Dec 23, 2008 | 1984 Toyota Pickup Deluxe
Jul 20, 2008 | 2004 Audi A4
Jun 27, 2008 | 1994 Mercury Tracer
28 people viewed this question
Usually answered in minutes!