Question about Toyota Tacoma
Could cost upward of a thousand depends on the parts and maching .
Posted on Apr 21, 2014
They are telling you that the cracked head may have damaged the engine. You can replace engine with a 50K engine from Japan through the internet supplier.
Posted on Apr 21, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Cracked Head Gasket???
The cylinder that is missing will indeed set a code, all 96 up cars and trucks sold in the US have this self diagnostic ability, the system is called OBD 2
Yes you are right the repair should be performed for free if it is the same problem, head or head gasket, take this matter up with your local authorities dept of consumer affairs if the shop refuses to help you.
Posted on Oct 01, 2008
Pull off the triangle shaped cover on the inside of the door panel over the mirror area by prying it off.
Remove the three 10mm nuts behind the cover, unplug the connector and slide the mirror off the door.
Posted on Oct 23, 2009
Posted on Nov 16, 2009
Testimonial: "Thank you."
SOURCE: i have a 1987 toyota
The 22R engine is one of the best engines Toyota built.
With the head off, you should have had the head gasket surface machined and the head checked pressure checked for cracks. It seems you did so.
I can only assume, you MAY have put the bolts back in without bowing out the cylinder block bolt holes before installing the bolts. These bolt holes fill with oil and antifreeze when you remove the head.
Doesn't matter how careful you are, the bolt holes always fill with fluid.
If so, the bolt torque would be reached before full clamping of the cylinder head. Worst of all, the block could have been cracked by the hydraulic pressure in the bolt hole as you tightened the bolt.
Posted on Jan 25, 2011
Tips for a great answer:
Aug 10, 2015 | 2005 Toyota Tacoma
Feb 06, 2011 | 1998 Toyota Tacoma
Mar 22, 2010 | 2002 Toyota 4Runner
Oct 11, 2009 | 2002 Toyota Tacoma
Jul 14, 2009 | 1996 Toyota Tacoma
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: