Question about 2002 Chrysler Town & Country
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: PT Cruiser Brake Light
The bulb in the rear light has burned out and to replace it follow these instructions: 1) go to your owner's manual to find out the part number. You can find and purchase the replacement bulb at Target, any auto parts store and even at Walmart for under $4.00; 2) pop open the trunk door; 3) get a phillips screw driver and unscrew the 2 screws holding the rear brake light fixture to your car body; 4) as soon as you turn over the fixture you'll see where to pull out the burned out bulb and replace it with the new one(s). Good luck!
Posted on Oct 15, 2008
SOURCE: Warning lights PT cruiser
that is likely the check engine light. if you live near an autozone they will scan it for codes (free) and that should tell you why the light came on
Posted on Mar 18, 2009
PO108 (map circuit high input) MAP is manifold absolute pressure... a sensor normally mounted on the intake. your code is suggesting a problem with this sensor, or its circuitry.
Posted on May 11, 2009
P0440 and P0441 are refering to the NVLD pump. It is in the rear on the right side up near the fuel tank. P0344 is your cam position sensor on the rear (drivers side) of the cylinder head. The P0440 and 441 are probably why the check engine light is on and the 344 was stored from a previous event. Either way they are two different and unrelated problems. The NVLD (natural vacuum leak detection) pump is an emission item with no effect of the way it runs however it will keep the engine light on. The cam sensor will keep it from starting or intermittently run bad and not necessarily turn the light on. Both parts are easy to change. I hope this helps.
Posted on May 19, 2009
SOURCE: "Check Engine light"
The issue is that the system randomly checks the loop of the fuel system to confirm that it has no leaks. A missing cap is the easy one to correct. It might also be a slpit in the rubber hose that connects the fuel fill tube (on the chassis) to the one on the tank, or any other hose in the the entire fuel delivery/ fume recovery sysrtem. The solenoid that allows the engine's vacuum to be used to conduct this test can also be sticking so that after the test cycle, it doesn't reclose. Good luck
Posted on Dec 10, 2009
Tips for a great answer:
Jan 02, 2016 | 2003 Chrysler PT Cruiser
Oct 29, 2015 | Cars & Trucks
Dec 07, 2012 | 2003 Chrysler PT Cruiser
Jul 30, 2010 | 2003 Chrysler PT Cruiser
Feb 14, 2010 | 2003 Chrysler PT Cruiser
Jan 07, 2010 | 2002 Chrysler PT Cruiser
Oct 07, 2009 | 2003 Chrysler PT Cruiser
Aug 26, 2009 | 2003 Chrysler PT Cruiser
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: