Question about 2006 Suzuki Forenza

Open Question

2006 suzuki forenza trouble code P0403 and P0340 just replaced the throttle body sesors and still getting codes P2106 and P2110 what else do i need to do?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22095 Answers

SOURCE: Suzuki forenza 2006 trouble code

P0107....Manifold Absolute Pressure/Barometric Pressure Circuit Low Input

What this means is your engine breather pipe is perished or split or the diaphgram inside the breather is choked up or the split

Posted on Jun 27, 2011

dttech
  • 4803 Answers

SOURCE: promblems P0340 P2105 P2106 P2110 P161B???? vehilce has limited power

Diagnostic Test Code (DTC) P0340 is a Camshaft Position Sensor (CMP) fault. This can be caused by several things including faulty CMP sensor wiring, a defective CMP sensor, a shorted Voltage Reference (VREF) circuit or interference from high voltage ignition system problems.

The Camshaft Position (CMP) sensor is used to correlate crankshaft to camshaft position so that the Engine Control Module (ECM) can determine which cylinder is ready to be fueled by the injector. The CMP is also used to determine which cylinder is misfiring when a misfire is present.

Conditions for Setting the DTC

> CMP sensor pulse is not detected at the correct interval every 4 cylinders.
> Engine is running.


DTC P2105: Throttle Actuator Control (TAC) System - Forced Engine Shutdown
Conditions for Setting the DTC

> Ignition ON.
> The ECM detects the system is in Forced Engine Shutdown Mode.

DTC P2106: Throttle Actuator Control (TAC) System Performance - Throttle Limitation Active
Conditions for Setting the DTC

> Ignition ON.
> The ECM detects the system is in Limit Performance Mode

DTC P2110: Throttle Actuator Control (TAC) System - Forced Limited Engine Speed
Conditions for Setting the DTC

> Ignition ON.
> The ECM detects the system is in Power Management Mode.

PLEASE NOTE that these codes DO NOT NECESSARILY mean that you have a defective TAC. They DO NOT NECESSARILY mean that your TAC is malfunctioning. (although they COULD mean these things) These codes are mostly for informational purposes to let you know that the throttle system is being overridden by the engine control computer. The REASON that this override has taken place must be DIAGNOSED.

DTC P161B: Control Module Torque Performance:
The actual explaination for this one is pretty long and drawn-out. But to put things in simple terms, the trouble shooting charts pretty much say to inspect the engine for hardware problems that could allow excessive air flow. If there are no such problems found, replace the ECM.

WITH ALL OF THAT BEING SAID:

There is a Technical Service Bulletin (TSB) that addresses ALL of the codes listed above and involves replacement of the Manifold Absolute Pressure (MAP) sensor to fix the vehicle.

Here is a brief description of the bulletin:

FORENZA
Section Title: Engine
TSB No. TS 18 02228

Division: Automotive
Category: Technical

SUBJECT:
ENGINE HAS NO POWER, HESITATES, STUMBLES ON ACCELERATION, CHECK ENGINE LIGHT IS ON WITH MULTIPLE DTCS WITH P161B (CONTROL MODULE TORQUE PERFORMANCE) AS THE PRIMARY DTC

See table below for possible accompanying DTCs.


dttech_186.gif

Posted on Sep 03, 2011

  • 5370 Answers

SOURCE: throttle body assembly


For OBD code problems check the list of help links below. Click the link below to go through its procedure.

--------------
Diagnostic Code P2195? http://schematicsdiagram.blogspot.in/2012/02/diagnostic-code-p2195-on-toyota-avalon.html

--------------
Diagnostic code P1330? http://technoanswers.blogspot.in/2012/02/diagnostic-code-p1330-on-kia-2wd.html

------------
Diagnostic code P0700, P1330, P1121? http://technoanswers.blogspot.in/2012/02/diagnostic-code-p0700-p1330-p1121-on.html

-------------
shows error code P1330? http://technoanswers.blogspot.in/2012/02/2003-kia-sorento-shows-error-code-p1330.html

--------
OBD code P1330? http://technoanswers.blogspot.in/2012/02/obd-code-p1330-on-2003-kia-sorento.html

------------
OBD code P01300? http://technoanswers.blogspot.in/2012/02/obd-code-p01300-on-toyota-rav4.html

--------------
OBD code P0768? http://repairhelpcenter.blogspot.com/2012/01/obd-code-p0768.html

------------
Evaporative Emissions System codes details? http://schematicsdiagram.blogspot.com/2011/11/evaporative-emissions-system-codes.html --------------- Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

----------------


Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

--------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html

------------
Diagnostic code P0010? http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-p0010.html

-------------
Diagnostic Code P1396?

http://howtobyme.blogspot.com/2011/11/diagnostic-code-p1396.html

--------------
Code P0452?

http://howtobyme.blogspot.com/2011/11/code-p0452.html

-------------


OBD code P0172 on Buick?

http://howtobyme.blogspot.com/2011/11/obd-code-p0172-on-buick-park-avenue.html

-------------
DTC Code P0321?

http://howtobyme.blogspot.com/2011/11/dtc-code-p0321-on-buick-park-avenue.html

------------------


Error Code P0471?

http://howtobyme.blogspot.com/2011/11/error-code-p0471-on-2007-dodge-ram-3500.html

-------------
P0304 Error code?

http://howtobyme.blogspot.com/2011/11/p0304-error-code-on-dodge-neon.html

-----------------


OBDII scan is receiving NO BUS CODE?

http://howtobyme.blogspot.com/2011/11/obdii-scan-is-receiving-no-bus-code.html

-----------
How to Clear OBD error Codes?

http://repairhelpcenter.blogspot.com/2011/11/how-to-clear-obd-error-codes-on-acura.html

----------------
Diagnosis and Testing Car Components?

http://vwrepairhelp.blogspot.com/2011/11/diagnosis-and-testing-car-components.html

--------------
Diagnostic Trouble Codes list?

Part 1.

http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura_18.html

--------------
Diagnostic Trouble Codes list?

Part 2.------

http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura.html

------------
OBD Code is cleared but check engine light will not RESET?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-is-cleared-but-check-engine.html

--------------
Diagnostic Code 43 and 71?

http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-43-and-71-on-1991.html

------------------
Code P0132?

http://schematicsdiagram.blogspot.com/2011/12/code-p0132-on-acura-tl.html

-------------
P0031 code?

http://schematicsdiagram.blogspot.com/2011/12/p0031-code-on-dodge-dakota.html

--------------
How to get diagnostic Code without OBD Scanner on Pre 1995 cars?

http://schematicsdiagram.blogspot.com/2011/12/how-to-get-diagnostic-code-without-obd.html

------------
OBD-II Trouble Code P0300?

http://schematicsdiagram.blogspot.com/2011/12/obd-ii-trouble-code-p0300.html

-------------
Getting diagnostic code P0016?

http://schematicsdiagram.blogspot.com/2011/12/getting-diagnostic-code-p0016.html

--------------
How to Read Codes from Check Engine Light?

http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html

-------------
Diagnostic Code P0540 continues to return and the MIL light is on?

http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-p0540-continue-to.html

-----------
DTC Trouble Code P0401?

http://schematicsdiagram.blogspot.com/2012/01/dtc-trouble-code-p0401.html

-----------------
Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-------------
Diagnostic code P0463?

http://technoanswers.blogspot.com/2012/01/diagnostic-code-p0463-on-ford-f250.html

-------------
Check engine light with codes P2195 and P2197?

http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html

------------
Diagnostic error code P0121,P0505,P1000,P2101,P2104, P2110,P2135,P2106?

http://technoanswers.blogspot.in/2012/01/diagnostic-error-code.html

--------------
P0174, P0037 and P2197?

http://technoanswers.blogspot.in/2012/02/p0174-p0037-and-p2197-on-toyota-rav4.html

-----------
P0352 Obd code?

http://technoanswers.blogspot.in/2012/02/p0352-obd-code-on-toyota-rav4.html

-------------
Error code p0402?

http://technoanswers.blogspot.in/2012/02/error-code-p0402-on-ford-escape.html

---------
Obd Code P0763?

http://technoanswers.blogspot.in/2012/02/obd-code-p0763-on-lexus.html

-------
OBD code P0301, P0430 and P0174?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-p0301p0430-and-p0174.html

---------
OBD code P0500?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-p0500-on-lexus-rx-300.html

-----------

This will help.

Thanks.


------------------------------------

Posted on Feb 26, 2012

johnf1aresti
  • 1098 Answers

SOURCE: 2006 suzuki forenza check engine light keeps coming on they can not fix it code P235 keeps coming on

check whether you have air sucked by the engine,or stepper motor if is fitted not working or dirty throttle body.

Posted on Aug 23, 2012

SOURCE: 2006 suzuki forenza engine light keeps coming on with p2135 code. I had the range sensor replaced and put 2 different throttle bodies in it. The engine light still comes on and goes off all of the tim

You don't fix it installing one let alone 2 throttle bodies
who did that

The shop you went to did not use the codes correctly
to diagnose the problem,so I won't guess with out factory
reference material

You doctor performs tests when you go there

So you car has to also be properly tested

Code don't indicate a fail part

If you had a ford product I would say you have bad ignition
coils setting the unrelated throttle body codes

On your I would need to study the vehicles systems as
should have the folks that took you money & guessed

I took a guick look using google & the code so you can do that
Doubt you will understand much & I think it goes much deeper
than the factory

Posted on Mar 06, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix acode p2106 on a 2006 suzuki forenza


p2106 is your throttle actuator control/wiring, actuator motor, sensor or engine control modual

Oct 18, 2015 | 2006 Suzuki Forenza

1 Answer

Code p2106


did you first read the FSM on that?
all words,. if not why not. its TBW car.
throttle by WIRE.
just $4 bucks too, near free, hell is free.
it will save you $4 easy, I PROMISE.

https://suzukipitstopplus.com/Products/1066-2006-forenza-reno-service-manual.aspx


Jul 12, 2014 | 2006 Suzuki Reno

1 Answer

2006 suzuki reno code 2106


read the FSM book yet or alldata.com???????
2106
2L automatic?

says
Trouble Code: P2106 (2.0L L4 VIN - Auto)
Throttle Actuator Control (TAC) System Performance - Throttle Limitation Active
Number of Trips to Set Code: 1
Trouble Code Conditions:
Ignition ON. The ECM detects the system is in Limit Performance Mode.
Possible Causes:
  • Throttle body
this means the ECU is in limphome mode.
and is cause because the ECU sees throttle sensors. that dont JIBE
There are effectively (insane yes) 4 TPS sensors
2 under foot.
2 in TB.
if any disagree at any time BAM, limphome mode sets.
"limited performance, old suz name was FAIL SAFE.
no matter its just the same.
use a REAL scan tool that sees ALL codes, i suspect you missed some, is this an AUTOZONED scan? with cheap, tool?

try an Innova 3160 tool. and see them all.

it is suspisious to me , only ONE DTC error !!!

Jul 12, 2014 | 2003 Suzuki Aerio

2 Answers

Trouble code P0340 2006 Suzuki Forenza


It`s coming up the Camshaft position sensor.

Apr 21, 2014 | 2006 Suzuki Forenza

1 Answer

P2106 P2110 P2135 P1516


Here is what meens those codes:

P2106
Throttle Actuator Control System - Forced Limited Power

P2110
Throttle Actuator Control System - Forced Limited RPM

P2135
Throttle/Pedal Position Sensor/Switch "A"/"B" Voltage Correlation

P1516
Throttle Actuator Control (TAC) Module Throttle Actuator Position Performance

I beleive that there is, specifically for chevrolet aveo 2006 a technician service bulletins.

You should have it checked at gm dealer!!!

ask for
TSB Number: SB-08-06-04-004
TSB Number: 08-06-04-023

Jan 27, 2014 | 2006 Chevrolet Aveo

1 Answer

2006 suzuki forenza check engine light keeps coming on they can not fix it code P235 keeps coming on


check whether you have air sucked by the engine,or stepper motor if is fitted not working or dirty throttle body.

Aug 23, 2012 | 2006 Suzuki Forenza

2 Answers

Promblems P0340 P2105 P2106 P2110 P161B???? vehilce has limited power and slows down while driveing due to limited power vehicle has not ever shut off i believe it s the actuator on the throttle...


Diagnostic Test Code (DTC) P0340 is a Camshaft Position Sensor (CMP) fault. This can be caused by several things including faulty CMP sensor wiring, a defective CMP sensor, a shorted Voltage Reference (VREF) circuit or interference from high voltage ignition system problems.

The Camshaft Position (CMP) sensor is used to correlate crankshaft to camshaft position so that the Engine Control Module (ECM) can determine which cylinder is ready to be fueled by the injector. The CMP is also used to determine which cylinder is misfiring when a misfire is present.

Conditions for Setting the DTC

> CMP sensor pulse is not detected at the correct interval every 4 cylinders.
> Engine is running.


DTC P2105: Throttle Actuator Control (TAC) System - Forced Engine Shutdown
Conditions for Setting the DTC

> Ignition ON.
> The ECM detects the system is in Forced Engine Shutdown Mode.

DTC P2106: Throttle Actuator Control (TAC) System Performance - Throttle Limitation Active
Conditions for Setting the DTC

> Ignition ON.
> The ECM detects the system is in Limit Performance Mode

DTC P2110: Throttle Actuator Control (TAC) System - Forced Limited Engine Speed
Conditions for Setting the DTC

> Ignition ON.
> The ECM detects the system is in Power Management Mode.

PLEASE NOTE that these codes DO NOT NECESSARILY mean that you have a defective TAC. They DO NOT NECESSARILY mean that your TAC is malfunctioning. (although they COULD mean these things) These codes are mostly for informational purposes to let you know that the throttle system is being overridden by the engine control computer. The REASON that this override has taken place must be DIAGNOSED.

DTC P161B: Control Module Torque Performance:
The actual explaination for this one is pretty long and drawn-out. But to put things in simple terms, the trouble shooting charts pretty much say to inspect the engine for hardware problems that could allow excessive air flow. If there are no such problems found, replace the ECM.

WITH ALL OF THAT BEING SAID:

There is a Technical Service Bulletin (TSB) that addresses ALL of the codes listed above and involves replacement of the Manifold Absolute Pressure (MAP) sensor to fix the vehicle.

Here is a brief description of the bulletin:

FORENZA
Section Title: Engine
TSB No. TS 18 02228

Division: Automotive
Category: Technical

SUBJECT:
ENGINE HAS NO POWER, HESITATES, STUMBLES ON ACCELERATION, CHECK ENGINE LIGHT IS ON WITH MULTIPLE DTCS WITH P161B (CONTROL MODULE TORQUE PERFORMANCE) AS THE PRIMARY DTC

See table below for possible accompanying DTCs.


dttech_186.gif

Sep 02, 2011 | 2007 Suzuki Forenza Sedan

1 Answer

This is what the code reader tells me. P161B, P0496,P2110, AND P2106 can you help me


P161B = Engine Torque Control - Limit Reached = the torque delivered by the motor has exceeded its rated value
P2106 = Throttle Actuator Control System - Forced Limited Power
and
P2110 = Throttle Actuator Control System - Forced Limited RPM = the engine overrevved , pumped more power than it was rated for and it had to be forced to slow down by closing the throttle.
All this is caused by P0496 = Evap Emmission high--- purge flow fault = the evap valve got stuck in the fully open position, pumped a lot of fuel in the motor and acted like a fully opened throttle; have it cleaned and if that doesn't fixes, replace it.

Aug 20, 2011 | 2006 Suzuki Forenza

3 Answers

How do i replace my TPS on a 2006 Suzuki Forenza?


2006 SUZUKI FORENZA RECALLS/DEFECTS & PROBLEMS Access the National Highway Traffic Safety database of 2006 SUZUKI FORENZA recalls and defects found on 2006 SUZUKI FORENZA automobiles. The National Highway Traffic Safety administration is authorized to order the 2006 SUZUKI FORENZA manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their structure, or performance.
Check with your loacol suzuki for recall not sure on this part but it is a common problem
Good luck

Nov 29, 2010 | 2002 Mitsubishi Eclipse

1 Answer

Wont start


The sensor ($100) in the throttle body ($400) is dirty and your engine is running high mix of gas. If you do not get it fixed, it will melt your catalytic converter ($1000) and stop up your muffler and your car will not run until you clean out the muffler system. If your car is not running, test this by disconnecting the exhaust manifold and try to start it.

Dec 25, 2008 | 2007 Suzuki Reno Hatchback

Not finding what you are looking for?
2006 Suzuki Forenza Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...