Question about 2004 GMC Envoy

Open Question

2004 Gmc Idler Air Control Valve - 2004 GMC Envoy

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 462 Answers

SOURCE: Air conditioning idler pulley siezed

There are 2 bolts that hold the tensioner to the engine. The pulley is part of the assembly when bought at a dealership.

Posted on Aug 08, 2009

daves944
  • 1050 Answers

SOURCE: the engine is idling high around 2500 rpm, I have

There will be a vacuum leak around the base of the throttle body gasket. You can confirm this by spraying carb cleaner around it's base. You should remove the throttle body, clean it thoroughly and replace the gasket. If you would like to really check, you can get a scan tool and monitor IAC counts. If the engine is still idling high and the counts read "0" on a warm engine, this means that the computer is trying as hard as it can to block all idle air, so it must be coming in somewhere. Possibly the throttle valve? has anyone been playing with the factory setting on the minimum idle screw?

Posted on Jan 16, 2011

  • 1167 Answers

SOURCE: How do i replace a heater control valve on a 2004 gmc envoy


Removal & Installation

Blazer, Jimmy, Xtreme & Bravada
The mode actuator is located on the top left side of the HVAC module.

  1. Disconnect the negative battery cable.
  2. Remove the knee bolster.
  3. Remove the right side driver knee bolster bracket from the steering column bracket and the intermediate bracket.
  4. Disconnect the vacuum connectors from the mode actuator.
  5. Remove the actuator rod retaining clip.
  6. Remove the actuator rod from the mode door lever.
  7. Firmly pull on the mode actuator in order to remove the actuator from the HVAC module.

    Is this what you were looking for0996b43f80205715.jpg

Posted on Feb 17, 2012

skychief2001
  • 21873 Answers

SOURCE: where is the idle air control valve on my 2002 gmc denali?

should be mounted on the side of the throttle body

Posted on Jul 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the air pump located on 2004 GMC envoy xl


Secondary Air Injection (AIR) Pump (K18)
On the left hand frame rail near G304 just behind the electronic brake control module

Mar 16, 2016 | GMC Envoy Cars & Trucks

2 Answers

I have a 2004 Chevy Impala at idle and eights like its bout to cut off


Check for a dirty or bad Idle air control valve. (IAC) you can take most off and clean them out. It may have a lot of carbon in it and not working properly. or it could be bad also. Just clean it out first! Good-Day!

Jul 26, 2014 | 2004 Chevrolet Impala

1 Answer

What are the symptoms of my idler air control valve going bad in my 2004 GMC Envoy


It will not idle correctly when at a stop or with the AC on or it will idle way too fast.

Apr 21, 2014 | 2004 GMC Envoy

1 Answer

I don't have a 2004 jeep wrangler I have a 2004 GMC ENVOY< PLEase tell me where the idle air control valve is located on MY CAR!!!


Here's a link http://www.youtube.com/watch?v=VdvgsaDmkac
It shows how to clean, and reinstall the throttle body on a 4.2 inline 6 trailblazer. which I believe is very much like your Envoy. The idle air control valve is located on the & is part of the throttle body It's the part the wires attach to

Jul 14, 2013 | Cars & Trucks

1 Answer

Where,exactly, is the idle air control valve on a 2004 envoy located


It should be mounted on the side of the throttle body. But if it is bad you should also have a check engine light on and a stored trouble code for the valve.

Jul 14, 2013 | Cars & Trucks

1 Answer

What does a p0410 code mean


Here is the definition of the code.

P0410 GMC Description An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
Possible causes - Faulty Vacuum hoses damaged
- Faulty Air Pump inoperative
- Air bypass solenoid harness is open or shorted
- Air bypass solenoid circuit poor electrical connection
- Air bypass solenoid leaking/blocked or stuck open/closed
- Air diverter valve leaking/blocked or stuck open/closed
Read more: http://engine-codes.com/p0410_gmc.html#ixzz2H3Wjt8f7

Jan 05, 2013 | 2004 GMC Envoy

1 Answer

Safari 1994 gmc carburator


Well the engine is fuel injected, so no carb is used.
Base idle is set at the factory, and the computer adjusts idle speed depending on load by controlling the amount of air entering the throttle body thru the idle air control valve.

Dec 25, 2012 | Cars & Trucks

2 Answers

My 1988 old 98 surges up and down at an idle,i replaced the maf sensor but it did nothing


try changing ur air idler control valve i had a 3.8 that di the same thing till i changed the air idler control valve

Jul 29, 2008 | 1990 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
2004 GMC Envoy Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...