Question about 1995 Mercedes-Benz SL-Class
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you can lower the window down you can jimmy it open from there preferably from the inside has more padding in the inside seal compared to the outside one i can see the switches working but some how it detached itself try and hook around the area were the door latch is not door hinges lol it wont be an easy task but a thin coat hanger as well as possibly a rubber door stopper to give ya some space to work with may help out good luck take her easy with the door stopper don't push it in too far may crack the plastic
Posted on May 10, 2009
SOURCE: I am having problems
Well you have a few issues here. As for the drivers door not locking/unlocking the vehicle, it sounds like the linkage that comes off the back of the tumbler has broken off. You can tell if this has happened because of the locks and also you won't feel any resistance when you turn the key in the door. For the gas flap lock either there is a leak in the vacuum system for the locks or the gas flap lock is bad. To manually open the gas flap lock you need to go through the trunk and behind the trunk panel where the gas flap lock is there should be a lever to manually unlock it or you can remove the screws that hold in the lock.
Posted on Oct 04, 2010
SOURCE: Have 1996 CL600 Coupe &
Hello. Check the latch itself and the matching piece on the boot lid. If one is loose or slightly out of alignment it will cause the troubles you are describing. Also, check the entire gasket. Joe
Posted on Oct 23, 2010
Hello and welcome to FixYa!
As a first course of action, I strongly suggest that you remove the positive battery connector and let it sit for atleast 15mins. before reconnecting it. This will reset the system and can get it back to it's normal operation.
Hope this helps and thank you for using FixYa! Have a good one!
Posted on Sep 17, 2011
Tips for a great answer:
Jan 29, 2016 | Holden Cars & Trucks
Sep 10, 2014 | 2008 Ford Focus C-Max
Dec 02, 2013 | 2008 Ford Ikon 1.6
Apr 16, 2012 | 2000 Toyota Land Cruiser
Dec 29, 2010 | 2003 Renault 181
Dec 17, 2010 | 2003 Saab 9-3
Apr 10, 2010 | 1994 BMW 3 Series
Aug 18, 2008 | 1998 Volkswagen Passat
Sep 17, 2013 | 1995 Mercedes-Benz SL-Class
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: