Question about 2005 Porsche 911

Open Question

Power seat adjustment on porche 911 does not move forward or back

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 24 Answers

SOURCE: porche 911/996

check for door seal inside the door pannel specific area the lower part of the door /yes you have to remove the door pannel /////// if that does not work try the water drain on the front, below the battery remove battery plate and clean the drain rubber / the water runs all the way to the back from the bottom of he carpet

Posted on Jul 18, 2008

jazzyboy11
  • 728 Answers

SOURCE: 1991 911 C2 porche

It may be just a hose. You can get that fixed at a shop for cheap and then you can put more power fluid in. In should work then.

Posted on Nov 03, 2008

Technopro
  • 243 Answers

SOURCE: engine repair manual for porche 911 m96/03

Hi there,
try this link: http://shop.fvd.de/de/en/Porsche-0/911-10/-/-/group/nameAnker/VID_5515248-VCD_56986477-gid_91/Tech.Manual-RepairM.html
let me know how you get on
Cheers

Posted on Apr 23, 2009

  • 2 Answers

SOURCE: electric seat will tilt back but cannot tilt back forwad

I DON'T THINK THEY HAVE MANUALLY DO THAT. YOU MAY CHANGE SWITCH TO OTHER WORKING SWITCH. THAN IT DOES NOT WORKING YOU MAY HAVE PROBLEM WITH MOTOR. I HAVE 1990 C4 SAME PROBLEM. BUT I CHANGED MOTOR IT WORK.

Posted on Jul 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My driver side seat won't go all the way forward. But when I let it back it goes back and goes down. When I move it forward it lifts up high but don't go forward enough for me.


Seat adjustment ranges are sometimes limited and sometimes there is a fault, such as a coin or something falling into one of the runners.

Cars intended for the premium market often have forward/back, up/down and sometimes tilt adjustment for the driver seat while for the small car, basic or budget market usually only have forward or back. Because on average a person who has shorter legs and needs the seat forward will also have a shorter body so enterprising designers have made the seat runners of some models slope upwards to lift the driver as the seat is moved forward.

Adjustable steering columns are fairly common, though only in the rise/fall plane. I haven't seen a telescopic column for many years. What is really needed is adjustable pedals but designers and manufacturers are very reluctant to go down that avenue, though there are companies specialising in such modifications.

You need to be on the ground on your knees with a good light looking under the seat to see if the available adjustment range takes the seat to the true limit of its travel in both directions.

Feb 28, 2015 | Cars & Trucks

1 Answer

Power seat


Most Fordicon1.png products are designed so the seat belt latch by the center console moves with the seat. The bottom of the latch rides on the seat rail, and with time sometimes it builds up a little play on the rail. As the seat moves forward or back, the seat belt guide often tilts forward or back, just a bit, on the rail, and gets stuck. So you can move forward or back just a bit, but then it jams and you can hear the motor, but can go no further.

The long term fix is to remove the seat, disassemble the seat belt guide and rail, and usually replace some parts.

But the short term solution is often to simply hold on to the seat belt latch and rock it forward and away from the seat as you try to go forward or back. Or, sometimes it works besticon1.png to rock it backwards and away from the seat as you try to move forward or back. It all depends on which way it is binding.

There's no guarantee that it won't jam again if you move it all the way back or forward, but once you find the right position to hold the seat latch in while moving the seat, you should be able to re-adjust it where you need it to be.

Oct 21, 2013 | 1998 Ford Expedition

1 Answer

I have a 2005 mercury montaineer. The drivers seat which is a power seat, will not go back all the way. It makes it half way and then nothing. Please help!!!


Most Ford products are designed so the seat belt latch by the center console moves with the seat. The bottom of the latch rides on the seat rail, and with time sometimes it builds up a little play on the rail. As the seat moves forward or back, the seat belt guide often tilts forward or back, just a bit, on the rail, and gets stuck. So you can move forward or back just a bit, but then it jams and you can hear the motor, but can go no further.

The long term fix is to remove the seat, disassemble the seat belt guide and rail, and usually replace some parts.

But the short term solution is often to simply hold on to the seat belt latch and rock it forward and away from the seat as you try to go forward or back. Or, sometimes it works best to rock it backwards and away from the seat as you try to move forward or back. It all depends on which way it is binding.

There's no guarantee that it won't jam again if you move it all the way back or forward, but once you find the right position to hold the seat latch in while moving the seat, you should be able to re-adjust it where you need it to be.

Aug 28, 2013 | Cars & Trucks

1 Answer

Electric seat won't go forward or back. Sounds like it's trying


Most Ford products are designed so the seat belt latch by the center console moves with the seat. The bottom of the latch rides on the seat rail, and with time sometimes it builds up a little play on the rail. As the seat moves forward or back, the seat belt guide often tilts forward or back, just a bit, on the rail, and gets stuck. So you can move forward or back just a bit, but then it jams and you can hear the motor, but can go no further.

The long term fix is to remove the seat, disassemble the seat belt guide and rail, and usually replace some parts.

But the short term solution is often to simply hold on to the seat belt latch and rock it forward and away from the seat as you try to go forward or back. Or, sometimes it works best to rock it backwards and away from the seat as you try to move forward or back. It all depends on which way it is binding.

There's no guarantee that it won't jam again if you move it all the way back or forward, but once you find the right position to hold the seat latch in while moving the seat, you should be able to re-adjust it where you need it to be.

Aug 22, 2013 | 2003 Ford Expedition

1 Answer

What could cause my drivers side power seat to stop moving forward and backward?


sounds like you might have a switch problem if the memory for seat position works ok. If you have a multimeter that checks for continuity then you could start there at the switch but you would also need a wiring diagram for the seats

Mar 16, 2013 | 2001 Acura MDX

2 Answers

How can i move a power seat that wont move


On these case go with the solved problems related to these issue.

Click the link below and follow the procedure:-----
1994 Lexus GS300: Power seat will not go back? http://howtobyme.blogspot.in/2012/05/1994-lexus-gs300-power-seat-will-not-go.html

-----------
1997 Toyota Avalon: Power Seat will not Move back? http://whatisbyme.blogspot.in/2012/05/1997-toyota-avalon-power-seat-will-not.html

----------
1998 Chevrolet Corvette: Power Seat Control Now Working? http://schematicsdiagram.blogspot.in/2012/04/1998-chevrolet-corvette-power-seat.html

-----------
Power seat will not go Forward http://repairhelpcenter.blogspot.com/2012/10/power-seat-will-not-go-forward.html

-----------
Replacing power adjustable bucket seats to both heated and cooled seats?

http://schematicsdiagram.blogspot.com/2011/12/replacing-power-adjustable-bucket-seats.html

-------------
Volvo Seat Removal with Heated Seats? http://schematicsdiagram.blogspot.in/2012/07/volvo-seat-removal-with-heated-seats.html

-------------

How to Remove Rear seat on Rover 600? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html

---------
How to remove Seat? http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html

-----------
These will help.
Thanks.

Nov 23, 2012 | 1998 GMC Jimmy

1 Answer

The power seat adjuster has stopped moving the seat forward/backward but will adjust the seat up/down. I can't find anything obstructing its path. Is there a simple explanation for this? Jeep Liberty 2002.


Those power seats have two power motors. One moves it up and down. The one that moves the seat forward and backwards must have gone bad. Have it checked and replaced if necessary.

Jan 16, 2011 | Jeep Liberty Cars & Trucks

1 Answer

Hello. My 02 grand cherokee has power seats.


THE GEARS ON THE SEAT TRACK MOTOR ARE PROBLY JAMED TRY PUSHING BACK ON THE SEAT WHILE PUSHING THE SWITCH

May 26, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Passenger seat back will not move either direction


Motor on the seat may have gone out, contacts in switch got dirty or worn, or assembly reached limit and stuck. Try sitting in it pushing back hard and adjust. If not youll need to replace switch,b take seat apart to fix or replace.

Dec 06, 2008 | 1989 Mercedes-Benz 300-Class

1 Answer

Power driver seat will not adjust forward or back.


My intuition tells me that the 6 way power seat track forward / reverse motor is bad. Sometimes you can replace just the one motor but most often a whole new power seat track is the only way to repair. It is not too bad to replace but the seat will have to be removed from the car and placed upside down to access the track assy. There are 2 bolts in the front of the seat and 2 bolts in the back of the seat that hold it down to the floorboard. Once it is loose you can rock the seat backwards to access and unplug the electrical connectors.

Aug 02, 2008 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
2005 Porsche 911 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...