Question about Cars & Trucks

1 Answer

During driving on D drive the gear is change automatically to N drive and the car become in neutral with N & D are on together and to return the car back to drive I have to put the transmission to the N then back to D.Pleas Advise.

Posted by on

  • 1 more comment 
  • Richard Gagnon
    Richard Gagnon Apr 21, 2014

    What kind of car Chryler car front drive do that kick down shaft pass trough shifter shaft

  • Richard Gagnon
    Richard Gagnon Apr 21, 2014

    Add a Comme

  • Richard Gagnon
    Richard Gagnon Apr 21, 2014

    Sorry mist the buton if it is crysler put some oil at the kick downshaft and try to loosen it by hand it works(kickdown is throtle valve shaft) when you push on gas selector shaft turn and put the car in neutal

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

Sounds like your shifter cable is frayed, typically near the Shift stick.

Posted on Apr 21, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

wdmb08
  • 34 Answers

SOURCE: Car stops moving in reverse gear

Sounds like the car is just slipping out of gear. Keep your hand on the shifter when you back up next time. See if you can feel the shifter move when the car comes out of gear. If the shifter moves up when it happens keep pressure on the shifter holding it back like you dont want it to move forward. And of course if the shifter moves back when it comes out of gear, put forward pressure on the shifter so it doesnt slip out. This might work for now but but i know i wouldnt want to spen 700 for that ****. Let me know how it goes.

Posted on Nov 20, 2008

  • 149 Answers

SOURCE: car will not shift into gear

Sounds like a linkage/cable to me. Disconnect the linkage at the transmission and move the shift actuator by hand to see if there is the same things happening. Don't try to do this with the engine running unless someone is holding the brake inside the car.

Posted on Jul 03, 2009

  • 2841 Answers

SOURCE: 92 Accord Automatic shifting

Has anyone change the transmission fluid and used anything other than Honda ATF-Z1. If so, have the fluid/filter changed in this car and use only Honda Fluid. This is the only fluid that you can use in a Honda. Even if you have used the correct fluid an fluid/filter change may help. If that is not the case then I suggest you seek out a trusted professional.

Posted on Aug 08, 2009

  • 3 Answers

SOURCE: 1996 dodge ram 2500 auto transmission not shifting properly

Well, first do the service. Pull the pan down and look for metal shavings. If there is metal shavings your in for a transmission. If not, you may have a problem with one of the transmissions shift solenoids located near the valve body.
P.S. The Duramax has the Allison 1000 transmission not the dodge cummins and they are one of the best trannys on the market.

Posted on Sep 04, 2010

bayyagg
  • 1672 Answers

SOURCE: my 2001 kia rio automatic

Check if ur axle in front is moving, if it is moving u got a LOOSE NUT on ur front wheel axle, some front wheel drives have tendency to loosen the nuts holding the axle to turn the wheel.It may also have a damage AXLE, let the mechanic check that! In ur transmission, modern automatic transmission have SLOENOiDS that acts to shift the FLUiD from one gear to another and its not FUNCTiONING. Better bring it to ur nearest dealer to check on that SOLENOiDS Most of the Transmissions today are electronically controlled!

Posted on Nov 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHILE DRIVING


10 Most Common Transmission Problems

www.transmissionrepaircostguide.com/10-common-transmission-proble...
Ever notice that while driving that the car hesitates or refuses to go into gear? ... For automatic transmissions, you might notice that when shifting into drive or park ....Neutral and park gears no problem, but drive, 1st, 2nd and reverse engages ...

Trans Goes Into Neutral While Driving - Transmission ...

www.transmissionrepaircostguide.com/topic/trans-goes-into-neutral/
Jun 5, 2015 - When I put it in drive, and begin to drive away the transmission will put itself in neutral. When I slow back down, it will go back into gear.

Jan 13, 2016 | Cars & Trucks

1 Answer

Automatic not changing gears


check the shifter mechanism for binding up and not moving freely into positions. Not starting in park but in neutral indicates something is out of alignment with the shifter. May just need cleaning and a bit of oil/grease to fix.

Feb 08, 2014 | Mitsubishi Pajero Cars & Trucks

1 Answer

Car jumping during gear change


Several possible causes.
1.Erattic or high line pressure
2.Electrical fault at solenoids (EV5 on 01N, 01M and01P boxes)
3.Hydraulic malfunction with same solenoid

Nov 30, 2012 | Cars & Trucks

1 Answer

My 1999 ford explorer will not go into park;all other gears work


DIsconnext and reconnect the linkage at the transmission. You may want top replace the linkage cable all together. Make sure you set the parking break and block the tires

Apr 14, 2010 | 1999 Ford Explorer

1 Answer

The automatic gear jumps to neutral or emergency state


try replacing your automatic transmission fluid to ease up the driving, if it doesnt change, try to see a mechanic to check on the automatic tranny. hope this helps

Jul 15, 2009 | 2000 Isuzu Trooper

1 Answer

Neutral is drive.


Sounds like the gear linkage cable needs adjusting Simple job really

Jul 09, 2009 | 1998 Saturn SC

1 Answer

I have a 2001 mazda protege automatic transmission. As i drive it seems like someone just shifted the car in neutral, after a couple of seconds it kicks in gear and drives, but the same thing happens...


It is possible that your transmission fluid needs to be changed. Get that done, and it that does not solve your problem you may have transmission problems all together.
Hope this helps

Jun 15, 2009 | 2000 Mazda Protege

1 Answer

Auto transmission problem


your bands may need adjusting or the transmission needs to be serviced to find out if it is something more serious

May 07, 2009 | 2005 Suzuki Reno

2 Answers

How do i reprogram the computer on my 2002 xl7


Try this relearn procedure hopefully it will help

Vehicles equipped with engine or transmission computers may require a relearn procedure after the vehicle battery is disconnected. Many vehicle computers memorize and store vehicle operation patterns for optimum driveability and performance. When the vehicle battery is disconnected, this memory is lost. The computer will use default data until new data from each key start is stored. As the computer memorizes vehicle operation for each new key start, driveability is restored. Vehicle computers may memorize vehicles operation patterns for 40 or more key starts. Customers often complain of driveability problems during the relearn stage because the vehicle acts differently then before being serviced. Depending on the type of vehicle and how it is equipped, the following complaints (driveability problems) may exist:

Harsh Or Poor Shift Quality
Rough Or Unstable Idle
Hesitation Or Stumble
Rich Or Lean Running
Poor Fuel Mileage

These symptoms and complaints should disappear after a number of drive cycles have been memorized. To reduce the possibility of complaints, after any service which requires battery power to be disconnected, vehicle should be road tested.

Vehicle Preparation

Ensure all components are connected. Ensure transmission fluid level is correct. Warm engine to normal operating temperature. If vehicle has been repaired, perform KOEO and Continuous Memory Code Self-Test and ensure fault codes are not present.

Computer Relearn Procedures

Idle Relearn Procedure

Place automatic transmission in Park or manual transmission in Neutral position. Ensure the emergency brake has been set and all accessories are turned off. Start engine and bring to normal operating temperature. Allow manual transmission vehicle to idle in Neutral for one minute. Allow automatic transmission to idle in Neutral for one minute and then to idle in Drive for one minute. Once initial relearn is complete, process will be completed during normal driving. Always complete the procedure before returning the vehicle to the customer.

Drive Cycle Test (AOD-E, AXOD & AXOD-E TRANSAXLES)

With transmission gear selector in Overdrive, moderately accelerate vehicle to 50 MPH for a minimum of 15 seconds. Transmission should be in 4th gear. While holding speed steady, lightly apply and release brake for about 5 seconds. Stop and park vehicle for a minimum of 20 seconds with transmission gear selector in Drive. Repeat procedure 5 times. Always complete the procedure before returning the vehicle to the customer.

Drive Cycle Test (E4OD)

With transmission gear selector in Drive, press Overdrive Cancel Switch (LED should light). Moderately accelerate vehicle to 40 MPH for a minimum of 15 seconds (30 seconds above 4000-ft. elevation) Transmission should be in 3rd gear. While holding speed steady, press Overdrive Cancel Switch (LED should go off) and accelerate from 40 MPH to 50 MPH. Transmission should shift from 3rd gear to 4th gear. Hold speed steady for 15 seconds. While holding speed steady, lightly apply and release brakes enough to turn brake lights on. Maintain 50 MPH for about 5 seconds. Stop vehicle for a minimum of 20 seconds with transmission gear selector in Drive. Repeat procedure 5 times. Always complete the procedure before returning the vehicle to the customer.

Mar 26, 2009 | 1998 Lincoln Mark VIII

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...