Question about 2008 Jeep Patriot
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the blower motor is located under the dash on the passenger side of the dash.a bracket with 1 screw and 3 other screws hold the motor in the heater box. remove them amd the electrical connector and the motor an be removed
Posted on Jan 04, 2009
It is pretty easy if you have a few tools and know how to use them.
1-You need to pry off the trim bezel. There are just snaps holding it on, but be careful you do not pull too hard or scratch it. Use a plastic stick or small srewdriver covered with tape.
2-There will be 4 bolts at each corner of the radio to remove.
3-Pull out the radio and and remove all the connectors and the AM/FM antenna plug.
4-Reconnect your new radio and repeat steps 2 and 1.
I did this same upgrade on my 2005 Jeep Grand Cherokee and it worked without the need for a theft code.
Posted on Mar 08, 2009
I would have it scanned by an auto parts store, to see what the code says, then get a service manual, cheap ones are at promanuals.net
Posted on Sep 23, 2009
Hi I have been working for jeep for 8 years and i have found that to be normal on the Dodge Calaber,Jeep Paitriot,Jeep Compass cause they are all based on the same vehicle .
Posted on Nov 17, 2009
Tips for a great answer:
Mar 17, 2016 | 2008 Jeep Patriot 2.4
Feb 06, 2016 | 2008 Jeep Patriot
Nov 09, 2014 | 2008 Jeep Patriot 2.4
Oct 19, 2014 | 2008 Jeep Patriot
May 05, 2014 | 2008 Jeep Patriot
Feb 15, 2014 | 2008 Jeep Patriot
May 09, 2012 | 2008 Jeep Patriot
Mar 09, 2010 | 2008 Jeep Patriot
Sep 28, 2009 | Jeep Patriot Cars & Trucks
Aug 17, 2009 | 2008 Jeep Patriot
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: