Question about 2010 Jeep Grand Cherokee
I have a Jeep Grand Cherokee Laredo that did not come with fog lights. I plugged the fog lights I bought into the existing fog light harness but they will not come on. Am I missing something or doing something wrong?
If it didn't come with fog lights, it may also have not included a fog light relay and/or fuse. Check the owner's manual for fuse and relay locations, and then check if the necessary parts are there.
Posted on Apr 21, 2014
You probably need the other end of the harness that connects to a switch in the dash as they have to be independent of the head lights by law. Check for a fuse that is missing in the fuse box.
Posted on Apr 21, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 jeep cherokee laredo
the only problem that vehicle has is with cooling fans is relay/module or electrical harness to module that burns up located behind and under right front headlamp assy must remove headlamp to access relay/module that is what powers up fan motor module assy.
Posted on Aug 10, 2008
there are many sensors and and each airbag have sensors so you will have to get it scanned to know where to start. just a note air bag parts can be very expensive so check out your local salvage yard. they can save you hundreds. good luck
Posted on Sep 28, 2008
Check this link & scroll down to your engine. Click on picture to expand.
Posted on Feb 03, 2009
Hello and welcome to FixYa
The interior lights wont turn off cant because it can't get a conncetion definitely a headlight switch issue common problem for that make
Part # 05137535AA Headlight Switch Probably a dealer item very simple to change this yourself. Hope this gets you going.Please Rate Me. And you can always Ask Me.
Posted on Apr 27, 2009
Trouble Code: P0113 (4.0L L6 VIN S Auto)
IAT Sensor Circuit High Input Print this code data Number of Trips to Set Code: 1
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Check with ignition on or engine running; battery voltage more than 10v; The PCM detected the IAT Sensor input was over 4.90v (exc. Dakota, Durango, Ram) or 4.98v (Dakota, Durango, Ram) for 3 seconds.
Posted on Dec 01, 2009
Tips for a great answer:
Jan 23, 2016 | 1994 Jeep Grand Cherokee
Oct 22, 2015 | Cars & Trucks
Apr 07, 2015 | 2010 Jeep Grand Cherokee Laredo
Oct 09, 2014 | 2000 Jeep Grand Cherokee Laredo
Oct 30, 2012 | 1999 Jeep Grand Cherokee
Dec 04, 2010 | 2001 Jeep Grand Cherokee
May 07, 2010 | Jeep Grand Cherokee Cars & Trucks
Feb 14, 2010 | 1995 Jeep Grand Cherokee
Jun 17, 2009 | 1999 Jeep Grand Cherokee
251 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: