Question about 2005 Lincoln LS V8

Open Question

Engine light on code p 0108

Car running ok

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004rx8 my engine light is on but running ok


there is a fault code stored in the engine computer module
car can run ok and have that light on

might have poor fuel consumption or some other issue
till fault code is cleared

if service is close have the service center use the diagnostic scanner to find the faulty sensor

if not pop in to a service center when possible and have the fault codes read and diagnosed

26310348-aj0bpuggwlpnm3rl25tm2hi1-4-0.jpg

Oct 13, 2016 | Cars & Trucks

2 Answers

Car runs rough, check engine light on, coolant level is ok.


with check engine light on check for codes there will be a code.

Aug 22, 2015 | 1998 Buick LeSabre

2 Answers

Check engine light is on in Dodge Ram 1500 why?


Drop in to a parts store like Autozone and they will scan it for you free and point you in the direction of any possible problem. If not, get back to us with that code(s) and we can help.

Aug 15, 2014 | 2000 Dodge Ram 1500 Truck

1 Answer

Dodge intrepid 2004 showing code p1687, check engine came on and air bag light, speed ometer and tack gauge dropped to zero but started working 5 seconds later light is still on and showing this code. Can...


the lamps all change at engine stall , did it stall.
at about 300 rpm all engines (gas) stall, and the ECU changes state.
all cars.
does car run, ok, drive ok ,start ok, and sound ok? just a clue here.

Sep 25, 2013 | 2004 Jeep Wrangler

1 Answer

Warning light check engine light turns on, sometimes after 10-20 minutes drive. The engine is perfectly OK. Indicator light is off after the car has "rested" during the night.


You may have a sensor malfunction. Have a mechanic run the codes and see if there are any stored in the computer. Just because the engine runs OK now does not mean it will continue to do so. The reason the light goes off after the vehicle has set over night may be due to the vehicle not sensing the issue after the long passage of time, until you begin driving again.

Nov 28, 2011 | Cars & Trucks

1 Answer

91 integra ok driving at mid rpm range no hills or coasting check engine light comes on car runs rough and dies. restarts and runs ok but dies 5-10 minutes later


Car runs rough and dies.The issue indicates fuel pressure problem.But as you mentioned check engine light comes ON.The check engine light comes ON when the cars computer (the ECU) notices any kind of electrical problem in car. Once the problem gets confirmed the engine light will remain permanently ON till the problem gets solved. In this case I suggest you to get your car scanned at autozone service center. It's absolutely free. In case in car scanning, if any error code is retrieved then you can check which part is faulty as per the error code. At autozone they also deal in parts.So if any part checked out faulty then you can get that part replaced as per the code.-------------thanks.Helpmech.

Dec 16, 2010 | 1991 Acura Integra Hatchback

2 Answers

Check engine light is on, what could be wrong . car is running ok but light still on


A check engine light could be anything. It is a problem with a sensor or electrical unit. The ONLY way to tell is to have a scanner put on it and run the engine codes

Jun 30, 2009 | 2004 Mazda 6

2 Answers

My 2000 monte carlo ss with a 3800 engine tends to start and stall about six times befor running, I pulled 3 codes 0108, 0404, and 1404 from the the computer .


I believe the codes are emmission related. I would have the fuel pump pressure checked. The fuel filter and fuel pressure regulator seems to be the failrue. The restarting of the engine several times is making the system build up enough pressure to start running . I would take to a shop to have the fuel pressure checked.

Mar 15, 2009 | 2000 Chevrolet Monte Carlo

1 Answer

2002 chrysler 300 M 3.5 liter immediatly quits after starting.


The ECM is most likey the culprit but I would check ground wires and wiring harness to be sure they aren't faulty. With you telling me the voltage is too high, it pretty much points to wiring but the ECM may have gone bad and its just sending blind signals hence the high voltage. The engine light isn't coming maybe because of the ECM isn't working. Pray it isnt the ECM, its costly but exhaust your options by checking wiring and ground beforing fingering the ECM

Dec 06, 2008 | 2001 Chrysler 300M

1 Answer

Trouble codes


P0108 - Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage,
Possiable MAP sensor defective

P0134 - Heated Oxygen Sensor (HO2S) Circuit Insufficient Activity Bank 1 Sensor 1
P0141 - Heated Oxygen Sensor (HO2S) Heater Performance Bank 1 Sensor 2 , I recommend you replace both O2 sensors, bank 1 and bank 2

Oct 13, 2008 | 1996 Pontiac Grand Am

Not finding what you are looking for?
2005 Lincoln LS V8 Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...