Question about 2003 Lexus ES 300

Open Question

2003 Lexus windshield wipers stay in up position. What can I do to fix?

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: how to remove old windshield wiper blades

Press in on the tab on the center of the blade and pull down perpendicular to the arm. To install, slide the new blade on the hook until it clicks.

Posted on May 09, 2009

Ad
  • 2841 Answers

SOURCE: I can't figure out how to remove the original

<object type="application/x-shockwave-flash" data="http://i.ehow.com/flash/player.swf" id="mediaPlayerContainer" height="352" width="404" ><param name="allowScriptAccess" value="always" /><param name="allowFullScreen" value="true" /><param name="movie" value="http://i.ehow.com/flash/player.swf" /> <param name="wmode" value="transparent" /><param name="flashVars" value="id=03KqeOEbyC4PAbiEJW06IW97q1&partnerId=3&pwidth=404&pheight=352&embedvars=http%3a%2f%2fwww.ehow.com%2fembedvars.aspx%3fshow_related%3dtrue%26from_url%3dhttp%253a%252f%252fwww.ehow.com%252fvideo_107_replace-windshield-wiper.html"/></object><br><a target="_blank" href="http://www.ehow.com/video_107_replace-windshield-wiper.html">How to Replace Windshield Wiper Blades</a> -- powered by eHow.com

Posted on Nov 14, 2009

radar001
  • 1051 Answers

SOURCE: How do I replace the front windshield wiper blades

Go to auto parts store and ask for wiper blades for your specific car. I believe there 19". The install procedure is on the back of the package. It's a 5 minute job at most.

Posted on Feb 23, 2010

  • 1 Answer

SOURCE: how do I take the wiper blade off of the wiper arm

you should remove the wiper arm first before taking the wiper blade. i took the wiper arm by removing the cap and the nuts and then you should be able to take the arm off......

Posted on Mar 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Pontiac Montana wipers not working how to fix


First you need a wiring diagram, free at http://www.bbbind.com/free_tsb.html Then you need a DVOM - digital volt ohm meter to test the circuit . Then if your not familiar with automotive electrical systems testing ,go on youtube an check out Electric Testing Techniques You Need to Know Also having a factory diagnostic trouble shooting chart would also be usefull . You could just start replacing parts , you mite get lucky . The wiper motor is a high fail part , so is the switch ..You could find the fuse is blown ! But fuse's don't usually blow without a reason . Short to ground , low resistance . ( high current flow) Also knowing how they work and what all is involved in making them work.
The Wiper/Washer System consists of the following components:
• Windshield wiper/washer switch
• Windshield wiper motor module
• Windshield wiper motor
• Windshield washer pump motor
• FRT/WPR/WSHR 25A fuse

Wiper/Washer System Operation
The windshield wiper motor module is part of the windshield wiper motor cover and controls wiper motor operation. The windshield wiper motor is a 2 speed motor and is operated at low speed in all modes except HIGH. The accessory voltage supply circuit to the windshield wiper motor assembly is used to operate the wiper motor in all of the low speed modes. The accessory voltage supply circuit to the windshield wiper/washer switch is used to supply the windshield wiper switch signal circuits and the wiper motor high speed circuit.
When the wiper/washer switch is in the LOW position voltage is supplied through a 24K ohm resistor within the switch to the windshield wiper switch signal 2 circuit, and accessory voltage is supplied to the windshield wiper switch signal 1 circuit. The reduced voltage from the wiper switch signal 2 circuit and accessory voltage from the wiper switch signal 1 circuit causes the wiper motor module to close the wiper motor accessory voltage supply circuit to the wiper motor low speed terminal.
Windshield wiper/washer system MIST operation is identical to LOW operation except that the MIST switch is a press and release type. When the wiper switch is moved to the MIST position and released, low speed wiper motor operation is started and will continue until 1 cycle is complete. If the wiper switch is moved to the MIST position and held, the windshield wiper motor will operate in the LOW mode until the switch is released.

Don't the wipers work in any mode ?
1
Did you review the Wiper/Washer System description and operation and perform the necessary inspections?
YES - Go to Step 2
NO - Go to Symptoms - Wiper/Washer Systems
2
Turn ON the ignition , with the engine OFF.
Operate the windshield wiper/washer switch through all the switch positions.
Does the windshield wiper/washer system operate normally?
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3
3
Turn OFF the ignition.
Disconnect the harness connector of the windshield wiper motor.
Turn the ignition ON, with the engine OFF.
Connect a test lamp from the accessory voltage circuit of the windshield wiper motor to a good ground.
Does the test lamp illuminate?
YES - Go to Step 4
NO - Go to Step 13
4
Connect a test lamp from the accessory voltage circuit to the ground circuit of the windshield wiper motor.
Does the test lamp illuminate?
YES - Go to Step 5
NO - Go to Step 14
5
Connect a test lamp from the signal 2 circuit of the windshield wiper switch to a good ground.
Press the windshield washer switch.
Does the test lamp illuminate?
YES - Go to Step 11
NO - Go to Step 6
Let me know if you make it this far and i will send rest of diagnostic's

Nov 25, 2016 | 2003 Pontiac Montana

1 Answer

How to Take off wiper arms on 1994 ford f150


Where the wiper arms attach at the base of the windshield, look on the side of the wiper arm for a small lock that can be pulled out with a small screwdriver, lift the wiper arm and slide the lock out as you release the wiper arm which should now stay in the raised position, slide the wioer arm off the shaft where the arm is attached.

Sep 06, 2014 | 2003 Ford E150

1 Answer

I have a 2003 Pontiac Montana and the windshield wipers stay all the way up.


check ground strap to wiper motor if ground is ok the park position is malfunction replace motor

Sep 03, 2013 | 2000 Pontiac Montana

1 Answer

I recently changed my wiper motor in my 2003 Hyandai Accent. Now the windshield wipers will not stop at the bottom. When I turn thw wipers on, it goes donw first then up then back and stops in the middle...


Remove the linkage from the wiper motor. Turn the wipers on then off. This will set the motor in the park position. Move the wipers by hand to there normal off position. Reinstall the linkage onto the wiper motor. The wipers should now park or stop in the correct position.

Sep 08, 2011 | 2003 Hyundai Accent

1 Answer

Wipers do not return to home postition, stay exposed on windshield about 2 inches from home


the windshield wipers may need to be taken off and placed on the right notch where they are connect.

Dec 31, 2010 | 2007 Lexus ES 350

2 Answers

I an '03 Chevy Venture van whose windshield wipers won't go down.


Your windshield arm is in need of repositioning. Take off the cap on the windshield arm and loosen the nut under the cap. Reposition the arm so that it faces 180 degrees flat to the passenger side of the car. Tighten the nut. This should solve the problem you've described.

Apr 11, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Wipers willnot return to park position


I've fixed this problem before. You have to disconnect the wiper transmission from the wiper motor. Put wipers in off position, unbolt the plate on top of wiper, turn wipers on then off. In the off position see where the wiper transmission is position in relation to where the park position is, remove the top plate from wiper motor and position it so as to be able to reconnect the wiper transmission now in the proper place. Please keep me informed. thanks you

Jun 03, 2009 | 2002 Chevrolet Impala

1 Answer

1999 Chevy Venture, Windshield wipers stop in upright position


You will need to replace the wiper transmission.This is a common problem.

Jan 24, 2009 | 1999 Chevrolet Venture

Not finding what you are looking for?
2003 Lexus ES 300 Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...