Question about 2007 BMW X3 3.0si SAV

Open Question

2004 BMW x3 does not start and ky does ot wok to open doors

No remote key entry and does not star

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: BMW remote control problem

I have a e60 525i that I just brought and it has the same problem, the owners manual suggests driving with the key in the ignition for a long time as the batteries are rechargable and may have gone flat, i have tried this and it doesnt seem to work

i also read something about getting water in the aerial about the rear window and that wrecks the receiever. My car isn;t under warranty so not looking forwarding to taking it to bmw

Posted on Jun 27, 2008

Ad
onyeredson
  • 404 Answers

SOURCE: Central Locking not working

Hi Craig,
I'm running a E34 Tds Touring with a similar problem, my rear doors and tailgate have dropped of the central locking circuit.
I have been told it is the Central locking Module a large black box under the dash that is faulty, apparently a common problem.
Hope this points you in the right direction,
Please remember to rate my effort!
Paul 'W'
Onyer~EDson(:0) {#><U.K.

Posted on Jan 19, 2009

p_murfy
  • 63 Answers

SOURCE: window dropped into rear door panel. How do I remove the panel & repair

the window regulator has failed. the door panel has to be removed first which requires removing the trim piece that is on the grab handle (extremely hard to remove without breaking) there are three of four screws that hold the door panel on. once the door panel is off, the vapor barrier has to be removed. don't tear it, it is there for a reason to keep water out of the vehicle. make sure you reseal it properly with window weld. once the vapor barrier is removed you will need to unclip the window glass from the regulator. i typically will take and break the tab that holds the window. once the window is loose, move the glass all the way to the top of the door. now remove the regulator, swap the motor over, and reassembly. i would recommend taking the vehicle to a bmw dealership, around $650 for the complete repair and the dealership will stand behind their repairs

Posted on May 03, 2009

ILikeBMW
  • 117 Answers

SOURCE: bmw keys do not open doors remotely

hello there

you need to repalce the battery in the remote key.

Hope this helps, please don't forget to rate me.

Posted on May 19, 2009

  • 87 Answers

SOURCE: remote key does not open the door for 2007 328i BMW

I suggest you to check fuse # 57 15Amp at juction box, you can access it from glove box. if the fuse is blown, replace it with 20A and try to operates lock/unlock 10X and replce door lock fails to responce during the operation. dont operate lock/unlock 15X the system will stop and you have to wait for few min to function it again.

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 BMW x3 want start all my lights are coming on but it want start


My x3 won't start I need help now!!!): - Bimmerfest - BMW Forums

www.bimmerfest.com > ... > X Series > X3 E83 (2004 - 2010)
Nov 26, 2012 - 10 posts - ‎7 authors I tried driving my 2007 BMW x3 3.0si today and it won't start I don't here a clicking sound and all the lights work and the radio works I tried ... 2007 X3 Won't Start - Battery Shows Full Charge ...
21 posts
May 30, 2014
x3 wont start... charged battery and still died, ideas ...
13 posts
Aug 30, 2013
BMW X3 Doesn't start - Bimmerfest - BMW Forums
25 posts
Jun 25, 2013
BMW X3 3.0 will not start. - Bimmerfest - BMW Forums
12 posts
Feb 7, 2012
More results from www.bimmerfest.com

bmw will not start - YouTube

? 1:14
www.youtube.com/watch?v=s0hzsEyx5us
Jan 22, 2011 - Uploaded by DjJohnny Cruz bmw 325i will not start! ... My 2007 BMW 328i has the identical problem, and it will not start while the ...

Nov 01, 2015 | BMW Cars & Trucks

1 Answer

Unlock drivers side door when key won&#39;t work


All BNW's have remote key openers built into key, so what doesn't work, the manual lock, or the remote key, or both. When you say you don't have keyless entry, on a BMW the remote is the key.
CeraCoat-NanoTech.com

Jan 28, 2015 | 2000 BMW 323i

1 Answer

2004 Suzuki Gran Vitara Keyless entry


Try this

2004 XL7

1. Remove key from ignition switch.

2. Close all doors.

3. Open drivers door

4. Insert key and turn to ON position and within 10 seconds turn
key off and remove key.

5. Within 20 seconds Close and open drivers door 3 times.

6. Insert key and turn to ON position and within 10 seconds turn
key off and remove key.

7. Locks should now lock and unlock automatically to confirm you
have entered programming mode.

8. Press the UNLOCK button on remote and locks should cycle to
confirm programming.

9. Repeat step 8 on each additional remote.

10. Exit vehicle with keys and remote, close door test remote(s)

Jun 01, 2014 | 2007 Suzuki XL-7

1 Answer

Can't unlock my car using the key? Changed battery in the key and now can not get into the car. What can I do?


Are you saying just the keyless entry (with the buttons on the key) will not remotely open the doors? Can you insert the key in the lock on the door and manually open the door? There is a procedure to "program" the remote/key but you have to be inside the vehicle with all doors close. I'll be happy to tell you the procedure if you're talking about the keyless/remote entry. You can reply here or feel free to email me directly at csautomotivecars@att.net. Wish I could be more help but need further information in order to help you.

Sep 21, 2013 | 1999 BMW 323i

1 Answer

2008 BMW X3, removing the left rear outer door handle.


2004 x3 Rear passenger door handle came off/apart. What are the steps to remove the inner door panel to access the door handle and repair it?

Apr 06, 2010 | 2007 BMW X3 3.0si SAV

1 Answer

Keyless entry not working


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. Remove key from ignition switch. Close all doors. Open driver's door. Carry out the following within 24 seconds: Turn ignition switch ON and back to LOCK position 3 times. Remove key. Press and release driver's door courtesy light switch 3 times. Ensure doors lock and unlock. If not, wait 40 seconds and repeat procedure starting with driver's door already open. Press each remote control lock or unlock button twice. Ensure doors lock and unlock after each remote control operation. If not, proceed as follows: Press and release driver's door courtesy light switch once. Ensure doors lock and unlock twice. Repeat procedure starting with driver's door already open.
NOTE: A maximum of 3 remote controls can be programmed.

Mar 29, 2010 | 2004 Mazda 6

1 Answer

Is there an after market alarm system for mt 2005 bmw X3 that will work with my key's built in remote?


All bmw x3 have immobilizer and alarm system.
To check,lock car with remote
Unlock with key and open door alarm should activate
To stop alarm, shut door press remote.


Nov 07, 2009 | 2005 BMW 3 Series

1 Answer

BMW Keyless Entry not working


hi, to program the keys to the vehicle is quite simple

1) open the vehicle, sit inside and close the door

2) insert the key in the ignition and turn to position 1 so that just the air bag light illuminates

3) press and hold the unlock button on the key and remove the key from the ignition (do not release the unlock button)

4) while still holding the unlock button with the key removed press the lock button 3 times

5) release the unlock button on the remote and the door locks should lock and unlock if the proceedure has been carried out correctly

6) to program any other key(s) press and hold the unlock button on remote and again press the lock button 3 times but do not insert it into the ignition or turn the ignition on as done previous.

you may want to print these instructions and read them a few times before proceeding, if you muck up the process while programing keys, no harm will be done, you just have to start the process over. hope this is of some help, regards mark.

Apr 07, 2009 | 1998 BMW 5 Series

2 Answers

My keyless entry doesn't work, now my manual key entry on my door doesn't work, and my unlock/lock button inside is not working either. I can't open my gas tank. Is there some way to reset my alarm or,...


Hold both buttons the Open and the Lock on your remote key for about 60 seconds, it should turn the lights inside the car and the problem should be fixed.
It worked on my Honda Accord 2004

Jul 22, 2008 | BMW X5 Series Cars & Trucks

Not finding what you are looking for?
2007 BMW X3 3.0si SAV Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...