Question about 1996 Hyundai Accent

Open Question

Cutting out when hot - 1996 Hyundai Accent

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1985 Chevy caprice classic an I go to cut it off it act like it dnt wanna cut off so I gotta pump the gas several times for it cut off y is it doin tht

It could be running hot, not enough to be called overheating but too hot. Your timing could be out a little bit. Your carb could need to be adjusted. I would suggest a tune up, plugs, cap, rotor. Check and top up the rad, If it is running hot and the thermostat hasn't been changed in 3 or more years, do it.

Dec 07, 2013 | Cars & Trucks

1 Answer

Won't start & cutting out on hot days?

Ignition module test it, if not look for codes in the system see if that helps

Feb 28, 2013 | Cars & Trucks

1 Answer

Emergency power cut now won't start

you cut cord have open circuit.your electrical cord has three wires neutral wire white wire black wires hot wire and bare wire for ground. if you cut either neutral wire or hot black wire in the electrical cord no power can flow to trimmer motor if you cut wire need to fix wire to get trimmer work again.

Dec 24, 2012 | Cars & Trucks

1 Answer

Car wont start when hot

Mr. Nicolas I have read your problem and saw that you have problem on hot start and cuts out. I will give you two advices. 1. Have you ever cleaned the throttle body on the engine? If not You must do it as that it is the reason of cutting out. 2. Check having help when the car starts if you have strong spark or fuel is not cutting off. Last thing I personally have the filing either you have tight valves even are hydraulic.

Aug 18, 2012 | Cars & Trucks

1 Answer

2003 taurus recently had rough idle and then cut out expecially after 3-4 short trips in a row and then would not start until it had set for 45 min to 1 hr. Now turns over but won't start. P0191...

then it cuts when hot ?
when cold start is it take some time to run from clod ? if yes then injectors nozzles if not then it is the (coil) well cut off when engine is hot

May 31, 2011 | Ford Taurus Cars & Trucks

1 Answer

Indicator displaying hot and cuts out but the car isn't which censor should I change?

you have 2 sensors 1 goes to the computer and one to the gauge at the part store tell them you need the gauge sensor not pcm sensor.

Jun 02, 2009 | 1995 Oldsmobile Ninety Eight Regency

1 Answer


try this... take off your ignition coil and test the resistance of the coil.. both cold and hot.. if your test goes to infinite all zeros.. you have what's commmonly called a hot coil... when it heats up it doesn't make contact internally right and doesn't allow power to flow.. no spark from coil.. no vrroom vrroom

Sep 17, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
1996 Hyundai Accent Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides