Question about 1968 Dodge Dart 4.5

Open Question

How to install hood hinges on a 69 dodge dart

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specificacion for dodge dart rally 1.4 turbo 2013


Torque spec's for what hardware on the 2013 Dodge Dart Rally 1.4 Turbo? Headbolts? Main bearing caps? Rod bearing caps? Camshaft drive hardware? Valve covers? Oil pan? What?

Apr 24, 2017 | Dodge Cars & Trucks

2 Answers

Which was the performance of the dodge dart 1972


Diego, 1972 Dodge Dart performance specs. and more. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.automobile-catalog.com/make/dodge/dart_5gen/dart_5gen_swinger_2-door_hardtop/1972.html
1972 Dart Specs Colors Facts History and Performance Classic Car Database
The 1972 Dodge Dart Demo n and ******* Valiant Duster and Scamp were similar
Dodge Dart Wikipedia the free encyclopedia

Aug 24, 2016 | 1972 Dodge Dart

1 Answer

1977 dodge cruise control fuse


Hello Jill Walker,

I am a keeper & lover of old cars... so I has no idea it was nearly impossible to find fuse data on something as new as a '77 Dodge.

I did go looking... (for FREE sites)... Sorry
(very good reasonably priced books below).

Before you get too deep into fuse hunts I will tell you MY EXPERIENCE has been the most common failure of CRUISE CONTROLS of this vintage was the vacuum bellows used to open the throttle (would crack at the edge (easy to test: QUICKLY using an UNCONTROLLED vacuum line... or vacuum test pump)),

Professional grade SHOP MANUALS usually have decent wiring diagrams & schematics... but
FACTORY (DEALER) MANUALS are the absolute best...!!

At the bottom I will post an eBay link ... showing the WRONG YEAR... (only to give you and idea what you are looking for)...
factory+workshop+manual+1977+dodge 1995 Chrysler Sebring Dodge Avenger Factory Shop Service Manual Set

My '69 Charger ($29 new... in 1969)
1969 DODGE CHARGER SUPER BEE DART GT CORONET ORIGINAL FACTORY SERVICE...

1977 1983 Motors US Auto Repair Shop Manual

Motor Auto Repair Manual 1971 1977 Hardcover 1976

Jun 29, 2016 | Dodge Cars & Trucks

1 Answer

How can i replace the hood lift supprt on a 1998 ford explorer?


This shows you how to take the hood off, the hinges, I am not sure how to replace those since my online resources doesn't cover that portion of body work. The diagram seems to show that the hinge goes into the firewall, so if you want you might have to cut into the firewall, but this is more of a salvage yard procedure.

I would look at the hood lift support more closely to see if you can indeed replace it.

REMOVAL & INSTALLATION Fig. 1: Exploded view of the hood-to-hinge mounting 85550005.gif
NOTE: It is highly recommended that you have at least one assistant helping during this operation.
  1. Open the hood.
  2. Matchmark the hood-to-hinge position.
  3. Disconnect any electrical wire harness plugs.
  4. Have you're assistant(s) support the weight of the hood.
  5. Remove the hood-to-hinge bolts and lift the hood off of the hinges.
  6. Installation is the reverse of the removal. Loosely install the hood and align the matchmarks. Tighten the bolts securely. Before removing the hood, matchmark the hood hinge to the hood 89680p03.jpg
    If equipped, disconnect the hood light wire harness plug . . . 89680p04.jpg
    . . . along with any ground straps 89680p05.jpg
    While an assistant holds the hood, remove the hinge-to-hood attaching bolts 89680p06.jpg
prev.gif next.gif

Jul 13, 2010 | 1998 Ford Explorer

1 Answer

1970 dodge dart swinger - turn key no crank, no


When you say no power at fuse panel, do you mean entire panel?
As far as no turn over, have you checked for neutral safety switch problem?

Apr 25, 2010 | Dodge Challenger Cars & Trucks

1 Answer

How to install 69 mustang trunk lid?1969 mustang


Need some clarification. The entire lid or the hinges. Either way, it is a lot easier with 2 people. You may want to remove the hinge torsion springs.

Feb 02, 2010 | 1965 Ford Mustang

1 Answer

1991 dodge ram 150 asd relay location


There are 4 relays mounted on Drivers side fender under hood. Near hood hinge area. Counting from the front it should be the second relay. They are not always installed in the correct order. It should also be the smaller relay in size.

Oct 25, 2009 | 1991 Dodge Ram 150

1 Answer

1972 dodge dart water leak from outside vent into car


I've never had leaks can trough the hood vents on any of the many Darts that I have owned and I think that the inside of the vents is part of the actual body of the car with no real access from inside or out. I believe that, somewhere on the firewall in the engine compartment there is a little a little drainage outlet. Check that to make sure it is clear. I have seen A LOT of leaks from around the wiper shafts and through the edges of the windsheild, I have used clear silicone caulk with good results.

Mar 18, 2009 | 2000 Mitsubishi Galant

Not finding what you are looking for?
1968 Dodge Dart 4.5 Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...