Question about 2000 Ford Mustang

1 Answer

Evap emmission,control sys leak

P0443

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Do not top off your gas tank. The gas is going into carbon canister which is only for fuel vapors to go into (carbon canister opening near the top of fuel neck near the gas cap). Your flooding the fuel vapor canister with liquid fuel; of course you are going to get a sensor message... 'Evap emmission,control sys leak

P0443 The fuel vapor canister reduces that gas smell on hot days outside/inside of car. The fuel vapor canister fillers bad smells from gas tank on hot days when the gas expands and burps fumes through carbon canister filter. From the canister (gas vapor fumes) goes back into the engine to be burned again...it's a closed loop for vapors to be recycled though engine. Don't worry, once the carbon canister dries out and no longer flooded with raw fuel the code should go away...just don't let the top off fuel tank back flow into the 'Evap emission control' carbon filter near the top and close to the gas cap...:)

Posted on Nov 08, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

oldfishead
  • 155 Answers

SOURCE: locating evap control valve circuit

This is the evap purge control circuit....proper diag requires alot of componet testing and equipment.... you might try replacing the evap control valve ( usually on the firewall area), and hope it was it...or get it properly diag at your dealer/shop..no simple answer/fix.......GL

Posted on Jul 10, 2009

  • 3 Answers

SOURCE: I have 1997 F150,check engine light came on, took

maybe a fuse is blown? did you have the mechanic check the fuses? or even check all your relays and wiring?

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a truck that popped up a P0443 code up and I've been trying to see what it is so I can get it fixed thank yo


P0443 - Evaporative Emission Control System Purge Control Valve Circuit Malfunction

Possible causes: - Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection

When is the code detected? An improper voltage signal is sent to Engine Control Module (ECM) through the valve.
Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
P0443 Description: The Evaporative Emission System (EVAP) canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the Engine Control Module (ECM). The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.

P0443 Information for specific makes: P0443 ACURA
P0443 CHRYSLER
P0443 DODGE
P0443 FORD
P0443 HONDA
P0443 INFINITI
P0443 ISUZU
P0443 JEEP
P0443 KIA
P0443 LAND-ROVER
P0443 LEXUS
P0443 MAZDA
P0443 MERCEDES-BENZ
P0443 MITSUBISHI
P0443 NISSAN
P0443 TOYOTA
P0443 Evaporative Emission Control System Purge Control Valve Circuit...

Jun 03, 2015 | Cars & Trucks

1 Answer

Code p0443


Fault Code:- P0443 Indicates a Power-train fault


The fault is generally due to a problem in the Emission Control area


Fault Description: EVAP canister purge valve circuit malfunction

Action of ECM:- ECM Default: - Canister purge inhibited - Adaptive fuel metering inhibited


After clearing the DTC, complete the Purge system monitor drivecycle
Check for a reoccurrence of fault DTC.


Possible Fault:- EVAP Canister purge valve to ECM drive circuit: open circuit, short circuit, high resistance EVAP Canister purge valve power supply circuit: open circuit, short circuit EVAP Canister purge valve operating vacuum hose leak / restriction EVAP Canister purge valve failure

Check fault codes here http://www.bluejag.co.uk/diagnosticcodes.php

Aug 22, 2013 | Jaguar X-Type Cars & Trucks

1 Answer

P0443 p code


Trouble Code: P0443

EVAP Purge Solenoid Circuit Fault

Possible Causes:


EVAP purge solenoid control circuit open or shorted to ground.EVAP purge solenoid power circuit open.EVAP purge solenoid is damaged or it has failed.PCM has failed.

Dec 17, 2012 | Dodge Durango Cars & Trucks

1 Answer

Emission failure on 2001 chevy blazer 4.3-


your vehicle has a vent valve solenoid located on the evap canister under the back end of the vehicle. You most likely have a bad vaccuum line going to the evap caniser. Have the vehicle smoke tested to verify. If no leaks are found replace the vent valve solenoid

Oct 25, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

Failed smog test Code PO443 ck. engine light on


This is the generic definition for the code.
Your year and model may be different. Possible causes include a faulty purge control valve or the circuit back to the computer.

P0443 Description The Evaporative Emission System (EVAP) canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the Engine Control Module (ECM). The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
Read more: http://engine-codes.com/p0443.html#ixzz27RdAClP2

Sep 24, 2012 | 2000 Pontiac Montana

2 Answers

My 2001 catera out of the blue stopped running. I changed the crank shaft position sensor . I have been told it could be the gas cap preventing it from starting. the code P0455 comes up


VOTE FOR ME INFORM ME OF YOUR PROGRESS
P0450 Evap Emission Ctrl Sys Pres Sensor Error
P0451- Evap Emission Ctrl Sys Pres Sensor Range/Perf
P0452- Evap Emission Ctrl Sys Pres Sensor Lo Input
P0453- Evap Emission Ctrl Sys Pres Sensor Hi Input
P0454 Evap Emission Ctrl Sys Pres Sensor Interm
P0455- Evap Emission Ctrl Sys Gross Leak Detected
P0456- Evap Emission Ctrl Sys Very Small LeakDetected)
P0457 Evap Emission Ctrl Sys Leak (fuel cap loose/off)
P0458 Evaporative Emission Sys Purge Ctrl Valve Circ Low
P0459 Evaporative Emission Sys Purge Ctrl Valve CircHigh
P0460- Fuel Tank Level Indicator Circ Error
P0461- Fuel Level Sensor Circ Range/Per

P2408 Fuel Cap Sensor/Switch Circ
P2409 Fuel Cap Sensor/Switch Circ Range/Perf
P2410 Fuel Cap Sensor/Switch Circ Low
P2411 Fuel Cap Sensor/Switch Circ High
P2412 Fuel Cap Sensor/Switch Circ Interm/Erratic

Sep 17, 2012 | 2000 Cadillac Catera

1 Answer

Code P0443


the purge control valve is back by gas tank and is a major part of evap system and should be replaced and are not to expensive or hard to change.

Aug 04, 2012 | 1997 Mitsubishi Montero

2 Answers

P0449 and P0455 error code 2008 2wd gmc envoy 30,203 miles


P0449 - Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction

P0455 - Evaporative Emission Control System Leak Detected (no purge flow or large leak)

Both are refer at EVAP system; other EVAP DTCs: P0440 - P0441 - P0442 - P0443 - P0446 - P0453 - P0455 - P0456

This indicates a fuel vapor leak or lack of purge flow in the EVAP control system. It means a large leak has been detected. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

Symptoms: You likely won't notice any drivability problems.
Causes: most likely means one or more of the following has happened:
A loose or improperly affixed gas cap
A non-conforming gas cap (i.e. not factory/original brand)
Other leak or damaged piece in EVAP system

Possible Solutions: the most common repair is to:
Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
Otherwise, replace the gas cap, and/or
Inspect the EVAP system for cuts/holes in tubes/hoses (you may hear a vacuum noise or smell fuel), repair if necessary


Hope helps.

Apr 23, 2011 | 2008 GMC Envoy

Not finding what you are looking for?
2000 Ford Mustang Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...