Question about Nissan Pathfinder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First, remove the battery terminals and clean them. Check that the ground wire on the block is tight and clean and the wire at the starter is also good. If you have 12v at the main starter cable and12v at the smaller (trigger) wire next to it with the key turned to the "start" position, it's likely the starter is bad (providing you can turn the engine by hand with key switch off) Make sure that the battery has 12v before starting diagnosis...radio etc. draw far less than the starter does. Even if relatively new, if the charging system isn't working, it will draw down the battery in less than an hour while driving..
Posted on Jun 07, 2009
SOURCE: my 2006 grand caravan is
if the voltage is correct. it may be a bad solinoid for starter, or the starter itself. check and make sure all connections from starter to battery, are clean and tight. with car off, voltage at battery should be at least 12.6 volts or better,engine off, with the engine on and if alternater is ok! it should read at least 14.2-14.6 at battery. good-day!
Posted on Aug 09, 2011
Sounds like you might need a new starter. If the lights and radio still come on, then you may need a new battery.
I hope this helps. Good luck!
Posted on Dec 09, 2011
Tips for a great answer:
Mar 29, 2015 | 2007 Chevrolet Chevrolet Cobalt LS
Oct 18, 2012 | Kia Sorento LX Cars & Trucks
Dec 07, 2011 | 1999 Chrysler 300M
Oct 13, 2011 | Cars & Trucks
May 21, 2010 | 2002 Ford Escape
Apr 23, 2009 | Saturn L-Series Cars & Trucks
10 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: