Question about 2002 Chevrolet Tracker

Open Question

Evap cannister location chevy tracker 2002 2.0

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 102 Answers

SOURCE: '96 Chevy Monte Carlo- codes P0441 and P1655

it will be the evap solenoid that will be the problem,not sure where it is in that car, sorry

Posted on May 18, 2009

  • 262 Answers

SOURCE: where is mass air flow sensor located on 2002

The mass air flow (MAF) sensor is an integral part of the throttle body assembly and cannot be serviced separately. For replacement of the MAF sensor refer to Throttle Body Assembly Replacement.

Posted on Feb 25, 2010

  • 34 Answers

SOURCE: code 499 large evap leak

this is a common easily fixed problem if you have a 2000.00 dollar smoke tester and a good scanner without these good luck obd2 alowance for evap leaks is a .020 " hole without smoke not happening
find the big black can with vacume lines on it check the lines are tight not dried up the purge solonoid all the lines check the seal on your gas cap are good places too start but without smoke machine it will be alot of hit and miss

Posted on May 18, 2010

pctech1
  • 1940 Answers

SOURCE: 2002 Chevy Tracker will not idle

I would start with a new fuel filter and some new spark plug wires.

Posted on Jul 10, 2010

nebby58
  • 257 Answers

SOURCE: where I can locate a

Check the under side dash on the drivers side. It is located in your owners manual as well. Hope this helps!

Posted on Apr 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the headlight relay located on a 1999 Chevy Tracker?


Headlight relay #1 location? - Suzuki Forums: Suzuki Forum Site

www.suzuki-forums.com/...geo.../34499-headlight-relay-1-location.html

Nov 12, 2009 - 10 posts - ‎2 authors
After testing everything else, the headlight relay #1 is the main suspect. Where ... Geo Tracker .... then walk the red lead from the fuse to HL Headlights stay ON - 2001 Chevy Tracker
10 posts
May 10, 2013
2003 tracker: Fuse & relay locations
10 posts
Jul 18, 2011
Disconnected DRL module from Tracker/Vitara 2002, but ...
10 posts
Oct 1, 2010
Disabling DRL
10 posts
Sep 5, 2009
More results from www.suzuki-forums.com

Interior Fuse Box Location: 1999-2004 Chevrolet Tracker ...

www.carcarekiosk.com/video/...Chevrolet_Tracker_2.../fuse.../replace
The video above shows how to replace blown fuses in the interior fuse box of your 2000Chevrolet Tracker in addition to the fuse panel diagram location.

Painless Headlamp Relay for 1999 - 2002 Chevy T


Dec 17, 2015 | Cars & Trucks

1 Answer

Where is the purge solanoid on chevy tahoe


Depends on the year, if its a 2002 or newer, it is located on the intake manifold. dead center, if you are fighting an evap code, the most common failure is the purge cannister vent valve, located underneth the vehicle, there is an updated kit.

Oct 20, 2014 | Chevrolet Tahoe Cars & Trucks

1 Answer

2002 chrysler concorde evap cannister location


look engine compartment near cruise control actuator or look fender panel near windshield washer fluid reservoir.chrysler put EVAP CANISTER DIFFERENT PLACES.

Dec 15, 2012 | 2000 Chrysler Concorde

1 Answer

Where is the evap purge canister valve located on a 2002 kia sedona?


The canister purge valve is located behind the intake manifold in the engine compartment on the firewall side .It should be a small round solenoid with a wire connector attached.It will have a feed hose from the evap cannister to the purge valve and then to the intake manifold.The evap canister is located on under the vehicle on the right side of the gas tank and is held in place by a bracket.If you follow these hoses it will also get you to the canister purge valve.I hope this helped.

Feb 03, 2011 | 2002 Kia Sedona

1 Answer

I have a chevy 1500 silverado 2003 I have installed a evap vent soleniod and my check engine light still remains on. Has any one had this problem?


sure, check your gas cap for a good seal. If good, trace the vapor hose from the cannister back to the fuel tank to check for leaks or cracked/loose hose connection. Also check the hose from the cannister to the engine intake manifold. Let me know if you have more questions.

Oct 23, 2010 | 2002 Mazda Protege

1 Answer

Where is the evap cannister located at?


under the hood usually to the right or left of the engine black in color with two lines coming out of the top of it it can be to the back of the engine near the fire wall or it can be up front near the battery.

Jan 02, 2010 | 2002 Dodge Neon

1 Answer

What is the EVAP system and the FTP sensor . Service light is on and that was the diagnostic. EVAP canister or vent solenoid.


The EVAP cannister is a charcoal cannister located under your hood, the solenoid operates the EVAP system, the cannister is a fixed part with no electronics or moving parts, I would try the solenoid, as it has both moving parts and it electric. Reset check engine light after repair. Let em know if this helps.

Oct 27, 2009 | 1998 Ford Taurus

1 Answer

'96 Chevy Monte Carlo- codes P0441 and P1655


it will be the evap solenoid that will be the problem,not sure where it is in that car, sorry

May 17, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

Where is the evap canister on a 2002 chevy tracker located?


not sure but you should be able to find it it is like 3 inches across and 8 inches long and its a cylinder type affair.. it also has a pressure switch in it which lets your compressor turn off and on depending upon the amount of freon in your system.. if low this switch will shut off your compressor .. it should be up near the radiator or if not there it will be near the firewall on passenger side.. this should put you at it ... thanks and holler if you need more... Jerry

Apr 26, 2009 | 2002 Chevrolet Tracker

Not finding what you are looking for?
2002 Chevrolet Tracker Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...