Question about 2007 Maserati Quattroporte Executive GT Sedan

Open Question

Car key codes - 2007 Maserati Quattroporte Executive GT Sedan

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

KEY CODE FOR Isuzu ls 250


no year
no county
is this key fob code., or radio key codes or?

is 250 is not a car, it has a full name use it and get 10x better help.
is this some KB or Backie?

key
kEY fob
or radio keyed in pass word.
the word key can go both ways.
my guess FOB the KEYFOB.
did you lose your car keys.

Mar 21, 2017 | Isuzu Cars & Trucks

2 Answers

What is a 1994 isuzu trooper key code?


A key code is a series of alphanumeric characters used by locksmiths to create a key. There are two kinds of key codes: blind codes and bitting codes.

In other words you can only start a car with the key that they have programed your car to start with. The keys them self have a chip inside and the cars computer reads that chip so it knows it not being stolen.

If your having problems with it do the following.

TAKE YOUR TITLE AND REGISTRATION AND ID TO THE DEALERSHIP AND THEY CAN CUT A KEY BY THE VIN NUMBER

Pls rate. Thank you.

Oct 03, 2016 | 1994 Isuzu Trooper

1 Answer

Soedo fuel gauge and water gauge not showing key does not flash lights when presed does not fire up citroen picaso 2lt diesel 2005


the ignition has a reader on it so when the key is in the ignition it reads the key that has a code in it of a key chip in the fob part of the key there are 3 types of keys. a cheep way to find out if there is a code still on the key is take it to have a new key cut. they put it on a reader to get the cod. if it has a code then it is the reader in the lock at fault. then that is something to do with either the immobilizer or the key reader. dropping the key or magnetizing the key can damage the code stored on it, to get the code back on the key you need to go to citron outlet with all you doc's for the car and the pass key. can charge anything for this code to be put back on or in the key.

Mar 27, 2014 | 2005 Citroen Xsara

1 Answer

How to remove code from key. Have new key and code and want to re program old key


Only the car dealer can reprogram the old key. It would probably cost about the same to have another new key made, rather than reprogram the old key.

Mar 08, 2014 | 2009 Pontiac Vibe 2.4L

1 Answer

Where can i find the key code for a 1998 cavalier


There is no code on the car. A dealer and a few locksmiths can get the code from the VIN number. When the car was new there may have been a card in the owners manual with the key codes.

Jun 23, 2012 | Cars & Trucks

1 Answer

The immoboliser light flashes when the key is turned?


this is how the immobiliser system works........you have a remote,it has 2 codes,one is fixed,one is random,the random code changes every time you lock the car,and this is the code the car reccognises to open/start the car.the fixed code is for simple key reccognition.the key has a magnet inbuilt that has a fixed code that matches the remotes fixed code.if you use a wrong key,the car will start,then die.the flashing light on the dash is a warning that the key code is weak and COULD cause a malfunction.use your spare keys and if the light still flashes you may need to have the keys recoded.(NO. YOU CANT DO THEM YOURSELF as the VW computer diagnostic computer has to match then reccognise the key to the car.) thats why when reseting the keys/car after a battery is changed you must go through the set/reset as shown in the handbook(that nobody seems to own).

Nov 22, 2010 | 1997 Audi A4

1 Answer

My car radio is in safe mode and i need to take it out


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Aug 26, 2010 | 1998 Audi A4

1 Answer

I want to unlock safe mode of my car stereo and radio


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please rate my response. Thanks!

Apr 16, 2010 | 2000 Audi A4

1 Answer

My audi a6 car stero


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please rate my response. Thanks !

Apr 08, 2010 | 1999 Audi A6

1 Answer

Lost car key


You can try Carfax.com They may have the key code unless the door keys have been replaced. Good luck and hope this helps. 

Jun 23, 2009 | 1997 Nissan Maxima

Not finding what you are looking for?
2007 Maserati Quattroporte Executive GT Sedan Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maserati Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Maserati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...