Question about 2000 Daewoo Nubira

Open Question

Where is the low pressure port on a 2000 daewoo nubira

Only found high port

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: daewoo nubira power windows

Dont buy a daewoo

Posted on Sep 07, 2008

Ad

SOURCE: '97 Daewoo Nubira 1.6L Eurowagon

probably a vacuum leak

Posted on Sep 18, 2008

SOURCE: 2000 daewoo nubira brake light problem.

Thanks to your advice my problem is solved. A big fixya is in order. Thanks again

Posted on Oct 07, 2008

  • 1 Answer

SOURCE: replacing timing belt on daewoo nubira 2000 model

Instructions Difficulty: Moderate Things You’ll Need:

  • Set of ¼-inch drive sockets ¼-inch drive ratchet Set of ½-inch drive sockets ½-inch drive ratchet Set of 3/8-inch drive sockets 3/8-inch drive ratchet Set of metric wrenches Floor jack Jack stands
Step1 Raise and support the vehicle on jack stands. Remove the intake air temperature wiring, the breather hose and intake air hose. Take off the air cleaner assembly. Step2 Remove the right wheel. Remove the accessory belts. Remove the crankshaft bolt and the crankshaft pulley. Remove the power steering bolts and the timing belt covers. Temporarily install the crankshaft bolt and turn the engine clockwise until the mark on the crankshaft pulley, which is a triangle stamped into the crank sprocket, is aligned with the corresponding triangular mark on the block. Step3 Make sure that the timing marks are aligned on the camshaft sprockets. These are a line on each sprocket that runs through a tooth on each sprocket. These lines should line up in the middle between each sprocket and point toward each other. If they do not line up, turn the crankshaft one more time and they will line up. It takes two turns of the crank to one complete revolution of the cam. Step4 Loosen the water pump bolts; using the 3/8-inch ratchet, turn the water pump clockwise away from the belt and loosely tighten the bolts to keep it there. Remove the timing beltmag-glass_10x10.gif. Make sure the timing marks are aligned and install the new belt starting on the right side from the crank sprocket and working counterclockwise. Keep all the belt tension on the right side away from the tensioner. Step5 Loosen the bolts in the water pump and rotate the water pump counterclockwise to apply tension to the belt. Watch the tensioner, which is above the water pump, and apply tension with the water pump until the pointer on the tensioner lines up with the notch above it. Lightly tighten the water-pump bolts. Step6 Turn the engine two more times and align the timing marks perfectly. Loosen the water-pump bolts and, using the ratchet, apply tension to the belt until the tensioner pointers are aligned. Tighten the water-pump bolts. Step7 Install the timing-belt covers and the bolts in the power-steering pump and tighten. Remove the crankshaft bolt and install the crank pulley and the bolt, then torque the crankshaft pulley bolt to 70 foot pounds of torque. Install all components in reverse order of removal.

Posted on Mar 08, 2009

alicantecoli
  • 22265 Answers

SOURCE: 2000 Daewoo Nubira camshaft position sensor

on the front under timing belt cover ,back cam ,if its not their then back of head about 3inches along from the gear wheel end

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a daewoo nubira 1.6 KLAN and it has just been diagnosed as having faUlt code PO107 manifold pressure sensor low


MAP sensor sending low voltage back to ecu.
possible causes....vacuum leak to sensor, broken wiring, faulty map sensor...can also be blocked with carbon...remove and clean first

DAEWOO NUBIRA 2 0 16V FROM 1997 AIR MANIFOLD PRESSURE MAP SENSOR ULTRA...

Feb 24, 2015 | Daewoo Cars & Trucks

1 Answer

What is Daewoo nubira fuel pressure


Correct pressure at the fuel rail should be greater than 35Psi.

Sep 18, 2014 | 2000 Daewoo Nubira

1 Answer

What's your problem?what does trouble code p0463 relates to for a 2000 daewoo nubira ?


p0463..... fuel level sensor A circuit high input...... thats the problem

Dec 28, 2011 | 2000 Daewoo Nubira

1 Answer

Radio code


I have found on daewoo they stamped the code on a sticker on the top of the radio. If you pull off the radio trim you should be able to see the code.

Jul 19, 2010 | 2000 Daewoo Nubira

2 Answers

2000 daewoo nubira low oil pressure and no oil pressure sometimes


There are only two valid reasons for low oil pressure...bad bearings on crankshaft or obstructed oil pickup screen for pump...pump can be damaged by debris or hard carbon from either source but generally will not fail on it's own.
You may not be happy to hear this answer, but that's how it works on every engine, not just yours!!!
Good luck with it

Oct 26, 2009 | 2000 Daewoo Nubira

1 Answer

High beam not working


yes there is have you checkt the high beam ligts. there is one lamp tho the low beam ligts (50w) usaly and there is one lamp tho the high beam ligts usaly (100w)

Jun 08, 2009 | 1999 Daewoo Nubira

Not finding what you are looking for?
2000 Daewoo Nubira Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...