Question about 2005 GMC Envoy

Open Question

Code p0410 secondary air induction system

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 726 Answers

SOURCE: Service engine soon light,

what normally fixes this is the light means service and when the service is getting done the injection system will be serviced and reset (malfunction means blockage, not tuned right any thing when the service is done it will be fixed and reset

Posted on Aug 01, 2008

  • 184 Answers

SOURCE: code P0410 sonoma 03 2.2 how can i fix??

These two links have the answer:
http://www.obd-codes.com/p0410
http://www.obd-codes.com/forums/viewtopic.php?f=1&t=1956

Good luck!

Posted on Mar 31, 2009

  • 1 Answer

SOURCE: 1. Trouble Code #00410 "States

I have a 2000 2.2L Sonoma that I had to replace the motor in with a 99 engine and when I did the exhaust manifold was different and I could not hook up my air pump and I now have a service engine light on all the time but it runs just fine and I even think it improved my gas mileage. You might check your air pump connections or sensor. The air pump is on the front of the engine below the ac unit. I TOO have a Hanes book but also a Chilton book because 1 covers some things the other does not

Posted on Sep 11, 2010

  • 7353 Answers

SOURCE: 2001 GMC Jimmy OBII code

The A.I.R . system has its own fuse box, in the fender behind the right headlamp area. . Its a standard fuse. The AIR pump fuse is 30 amps (green)

Posted on Sep 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble code P0410 with many others


P0410 code is for secondary AIR injection system. this injects air into the exhaust system to lower emissions, its pointless and wont effect your vehicles performance. It doesn't make the car any more efficient it just "dilutes" the exhaust emissions

Jan 03, 2016 | Cars & Trucks

1 Answer

How to replace air pump on a 2001 cadillac deville


P0410 Secondary Air injection System Troubleshooting ...

? 4:23
www.youtube.com/watch?v=dIrmkxj6wJE
Oct 3, 2008 - Uploaded by richpin06a P0410 Secondary Air injection System. ... I have a 2001 Saturn S-series showing this code. The air pump was not running. ... The fix for me was to replace the hose/wire that runs from the diverter valve, over a crevice on the ...

Sep 08, 2015 | 2001 Cadillac DeVille

1 Answer

I have a service engine soon light on and have hooked up an OBD11 reader to it and got code P0410 pertaining to a secondary air injection problem. hoses are fine, pump is new.


P0410 Oldsmobile - Secondary Air Injection System Malfunction

Possible causes: - Faulty Vacuum hoses damaged
- Faulty Air Pump inoperative
- Air bypass solenoid harness is open or shorted
- Air bypass solenoid circuit poor electrical connection
- Air bypass solenoid leaking/blocked or stuck open/closed
- Air diverter valve leaking/blocked or stuck open/closed

Tech notes: Visually inspect AIR pump and AIR bypass valve harness and connector, if connector are OK, then replaced AIR bypass valve.

When is the code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system.

Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

P0410 Oldsmobile Description An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
P0410 Oldsmobile Secondary Air Injection System Malfunction

May 30, 2015 | 2001 Oldsmobile Intrigue

1 Answer

Hi sir , i have problem in my car code p0410 and i checked co2 its 14.8 and high what is the part need to check or change


code p0410 refers to secondary air injection(AIR) system---malfunction====causes --wiring---AIR valve---AIR solenoid---ECM
check /replace the air solenoid and/or valve.

Jan 01, 2014 | 2005 Peugeot 407 2.2

1 Answer

P0410 code 01 02


P0410 - Secondary Air Injection System Malfunction
Possible causes- Faulty Vacuum hoses damaged
- Faulty Air Pump inoperative
- Air bypass solenoid harness is open or shorted
- Air bypass solenoid circuit poor electrical connection
- Air bypass solenoid leaking/blocked or stuck open/closed
- Air diverter valve leaking/blocked or stuck open/closed

Read more: http://engine-codes.com/p0410.html#ixzz24VOZPAy2

Aug 24, 2012 | 2000 Chevrolet S-10

2 Answers

What does this code mean? P0410


Diagnostic Test Code (DTC) P0410 indicates that your secondary air injection system is not functioning properly.
Not all 2001 Chevrolet Bazers are equipped with secondary air injection. The secondary air injection system was added to vehicles that were to be sold in certain areas where the emissions laws required it, like the State Of California.

The Powertrain Control Module (PCM) monitors the system by commanding the secondary air blower motor to run and the air injection solenoid to open. This causes additional oxygen to enter the exhaust system. The PCM then monitors the signal from the oxygen sensors to see if the commanded air has in fact, entered the exhaust system. Code P0410 sets when the PCM has commanded the blower motor on and the solenoid open and there is little or no change in the oxygen sensor signal.

GM has had some problems with these systems and there has been a Technical Service Bulletin (TSB) issued that addresses some of the known concers. Below is a brief description of the TSB and the issues involved.

Bulletin No.: 04-06-04-015A
Date: November 28, 2006
TECHNICAL
Subject:
LN2, L43 or L35 Engine SES/MIL Light Illuminated, AIR Pump Ingesting Water and DTC P0410 Set (Replace AIR Pump and Inlet Hose Assembly)
Models:
1999-2003 Chevrolet Blazer, S10
1999-2001 GMC Jimmy
1999-2003 GMC Sonoma
1999-2001 Oldsmobile Bravada
with Vortec 2.2L I4 or 4.3L V6 Engine (VINs 4, 5, W - RPOs LN2, L43, L35)
Condition
Some customers may comment on the SES/MIL light being illuminated. Upon investigation, the technician may find a DTC P0410 indicating that there is a concern in the secondary air injection system.
Cause
Water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump.
Correction
Replace the AIR pump and install a new inlet hose and solenoid tube assembly...

The bulletin goes on and gives detailed information on how to perform the repair and the part numbers of the replacement parts needed to do so. Your local dealer can provide the parts for you and you can probably get them to print out a complete copy of the bulletin for you. It is not really hard to do if you want to do this yourself.

Sep 01, 2011 | 2001 Chevrolet Blazer

1 Answer

Am looking for what the carmd code p0410 means for a 2004 buick ranier - my car md is not working right.


CEL light/code P0410, secondary air system fault.
DTC P0410 - Secondary Air Injection System

Suspect -
Relay/fuse (box B) loc 3 ,15amps
Pump $434(new) / $243 (Remanufactured) / $95 (used,Ebay)
solenoid $73
check valve $18
http://www.autopartswarehouse.com

A new pump, or simulator!

What signals the ECU, if the seconary Air Injection system isn't working?
H20 sensors, if running rich > Xtime throw code!
The pump only runs when the engine is cold, so the air & rich fuel mix is burnt in the exhaust manifold, so there's less Emission.

May 09, 2011 | 1997 Volvo 960

1 Answer

Service Engine Soon light came on. Took the car to Auto Zone the code P0410 popped up. What does this mean?


This is a secondary air system malfunction code.....

The Secondary Air System pumps outside fresh air into the Exhaust System during cold engine start up. This additional air helps burn up the highly rich exhaust emissions that are produced when the engine is warming up. The Secondary Air System typically has an Air Pump and some tubes or plumbing to route the air. The system also has a solenoid and Check Valve(s) to control the air flow.

Common Problems That Trigger the P0410 Code
  • Defective Check Valve(s)
  • Faulty Air Pump or Air Pump Relay
  • Faulty air control solenoids or vacuum lines
  • System may be restricted or plugged
Let me k now which direction you want to head in and we will check further

Feb 21, 2011 | Oldsmobile Bravada Cars & Trucks

1 Answer

Check Engine ight


Hello there:
Here is the code
P0410 Secondary Air Injection System Malfunction
It is another air pump that pushes air into the exhaust so the cats can burn more pollution.. It does not affect drive train, just emmisions it shouldnt cost about $400 if it is the air pump, Unless there is a secondary problem, ok?
Hope this helps you out
Best regards Michael

May 30, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Check engine light on, diagnostic code 0128 and 0410 keep coming up


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

P0410 - Secondary Air Injection System Malfunction
(has to do with exhaust system)

Note: There is a technical service bulletin (TSB) regarding code P0410 for a number of GM models. The TSB calls for the replacement of the AIR pump and the installation of a new secondary injection hose.

Oct 13, 2009 | 2005 Chevrolet TrailBlazer

Not finding what you are looking for?
2005 GMC Envoy Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...