Question about 2010 Hyundai Genesis Coupe

Open Question

Inside of tail light caome apart - 2010 Hyundai Genesis Coupe

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No tail lihts and brake lights


check for a loom connection to the rear as it may have come apart.

Dec 31, 2013 | 2002 Ford SVT Focus

Tip

BMW 650 Tail Light Problem


If you find that your BMW 650 CS/GS/Dakar tail light doesn’t work at all or flickers when riding, chances are the metal power terminals inside the bulb socket are no longer making a good connection with the metal bumps on the tail light bulb. This is a very common problem with the BMW 650 of all makes, models, and years. Fortunately, there is a very easy fix.
Due to excessive vibration, temperature changes, and replacing light bulbs, the two metal power terminal tabs inside the tail light socket deform and get pushed too far back inside the tail light chassis. This prevents the tail light bulb from making good contact with the power terminals and the smallest vibrations can cause the electric connection to break temporarily or indefinitely.

To fix the problem, all you need to do is pry the two metal power tabs forward just a little so that they make a better connection with the metal bumps on the tail light bulb. If you look at the back of the bike, the red tail light casing on the 650 CS/GS/Dakar is held in place with two screws. If you remove these screws the red tail light casing comes off and you have access to the light bulb inside. At this point, turn the ignition on, but you don’t need to start the bike. Remove the light bulb by pushing in and twisting clockwise about 1/8 turn. If the bulb flickered while removing it, then the bent power terminals are most likely the cause.
Looking at the tail light bulb you should see two metal bumps. These bumps need to make a good connection with the two metal power terminals inside the tail light casing. Turn the ignition off and find a small tool that you can use to pry the power terminals forward just a bit. Make sure the bike is off and you don’t want the power terminals tabs inside the tail light casing to touch.
After you have made the adjustment, turn the ignition back to “on” and re-insert the taillight bulb. If the bulb is lit, then you are done. If it still flickers a bit and doesn’t stay lit, then you will need to continue prying the tabs forward until a good connection is made.

on Dec 18, 2009 | BMW 650 Cars & Trucks

1 Answer

No parking lights in back


parking, yes, tail ,park.
(the correct name is park toy calls them tail, tell me how a tail lamp works in front of car, this name is from 1920cars , that only had 1 or 2 tail lights. (fun history that, with funny names)

if actually park lamps. 1st click of head light? switch?
there are over 20 park lamps in car, inside and out.
side markeres, front park lamps
all dimmable lamps inside are park too. all dead>?
then the park relay is bad (tail/park) or fuse. blown.

Dec 31, 2013 | 2001 Toyota Sienna

1 Answer

How do I change the tail light to my 2005 Ford Taurus. Someone backed into me and it broke. I bought the tail light online and can't afford to get it put on. How can I change it?


From inside the trunk. Open trunk and you'll find large black plastic wing nuts on the inner trunk wall opposite of your tail lights. Simply unscrew them and the tail light bulbs will come out of the lenses from the inside area of the trunk.

Oct 21, 2010 | 2005 Ford Taurus

1 Answer

How to change a wheel cylinder on a 1999 Dodge Ram Pick up truck?


take the drum off and then take off one shoe ( the least loaded up one would be my prefrence) remove the brake line from the back of the wheel cylinder and remove the two bolts. the wheel cylinder is now free, may be a little stuck give it a nice smack and install the new one. may have to replace the axle lines if they dont caome apart right. dont forget to bleed the rear brakes when ur done

Aug 25, 2010 | 1999 Dodge Ram

1 Answer

How to remove tail light assembly on 2005 town and country


The step by step procedure is given below:
1) Open the tailgate. Adjacent to the tail light inside the are 2 round, black plastic pieces that hold the light in place. Use a pliers or screwdriver to pull or pry them out
2) The tail light assembly will swing out because the front is held in place by a simple tab.
3) Find the small red plastic piece that locks the wire harness pieces together: slide it to unlock the harness
4) Pull wire harnesses pieces apart, put the new one in it's place, then reassemble.

Nov 08, 2009 | 2003 Chrysler Town & Country

1 Answer

Tail light assembly


If you look inside the trunk, you will need to undo the panel inside trunk to gain access to the bolts that mount the tail light assy's.

Jan 09, 2009 | 2002 Nissan Sentra

1 Answer

Replace tail lights


Usually all you have to do is pull back the inside trunk liner behind the tail lights from inside the trunk, or there may be a plastic door that you open to access the tail lights. The wires going to the tail lights connect to a plug that you turn counter clockwise and pull out from the back of the tail light assembly. Once you have removed the connector replace the bulb. Some light bulbs just pull straight out of the connector, others you may have to push in and turn counter clockwise to remove.

Oct 03, 2008 | 2001 Cadillac Seville

Not finding what you are looking for?
2010 Hyundai Genesis Coupe Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...