Question about 2011 Ford Edge
All other seat functions work except forward and reverse
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
U will need to replace the power seat transmission, the gears are most likely stripped out, not uncommon, this part is $800 so i would suggest u try to locate a used one.
Posted on Jan 17, 2009
the switch has failed or a combination of the switch and motor. the switch will be the easiest to replaace as you will have to remove and on some vehicle partially disassemble the seat to do the motor. The switch os mounted on the plastic panel which is held to the seat usually by 2 - 4 screws.
Posted on Sep 23, 2009
the switch pops in or out just pull on it unless you see screws it should just pop right out theres no need to worry about the srs.
Posted on Nov 14, 2009
Either the switch is bad, or the motor athat goes forward and back is bad. A mechanic will need to check it with a diagram to determine which.
Posted on Apr 29, 2010
SOURCE: 2008 Ford Expedition - Drivers
The motor and gears in the track are getting stuck.Either a weak motor or gears stuck.
Try this procedure as follows;---
Have somebody sit in the back and push the seat forwards at the frame while
you push the button forwards.Don't push at the headrest but as low as possible
To avoid getting stuck again don't put the seat all the way backwards, just
move it forwards ahead to get the tension of the track/motor. -------- But if the seat get pushed forward but if its still doing the same then its weak motor and it has to be replaced.But if its not getting pushed forward to its last.Then its bent tracks from which the seat moves.The tracks needs to be checked from which the seat moves back and forth.
The owners manual says about power seats. "It states that if the power seat doesnt't work, put the seat back section of the seat down to it's lowest position a couple of times. This somehow resets the body module for the driver seat." ---------------- This should help.Thanks.Helpmech.
Posted on Mar 07, 2011
Tips for a great answer:
Dec 29, 2015 | 2003 Chevrolet Avalanche
Oct 31, 2015 | 2007 Ford Mustang GT California Special...
Apr 08, 2015 | Seat Cars & Trucks
Dec 29, 2011 | 2007 Ford Expedition Eddie Bauer EL
Nov 14, 2011 | 2000 Subaru Outback
Apr 22, 2011 | 2004 Ford Mustang
Dec 30, 2009 | 2008 Ford Edge
Jul 06, 2009 | 1997 Mercury Cougar XR7
Apr 11, 2009 | 2005 Ford F-150
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: