Question about 1996 Ford Crown Victoria
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I don't see anywhere where you replaced the drive belt or the fuel filter it could be building up pressure in the fuel pump causing the sending unit to stick but before you do all this get a digital volt meter and check out the crank sensor I'm just asking because it has happened to me if you have a lot of keys on one key ring it can damage the ignition switch so check out the crank sensor and the ignition switch first
Posted on Jan 15, 2009
try tapping the crank sensor while someone turns the key on(dont try to start just turn key forward until the radio will come on) it should whirl when the key is turned, if not tap it then you should hear it whirl. then try to start.
Posted on May 26, 2009
Tips for a great answer:
Jan 13, 2014 | 1999 GMC Jimmy
Car not starting or turning over indicates towards multiple possibilities.
It can be issue with battery or weak battery. But if battery checks out ok, then
it can be starter issue or faulty alternator or problem with low fuel pressure
or no spark at spark plugs due to dirty spark plugs or faulty
ignition coil or injectors getting cracked or dirty and needs to be cleaned.
To confirm the problem, the basic troubleshooting is required.
Click this link below and follow the troubleshooting:------
This will help.
Feb 17, 2012 | 2001 Nissan Maxima
Mar 11, 2011 | 1996 Lincoln Continental
Nov 16, 2010 | 1999 Jeep Grand Cherokee
May 13, 2009 | 1999 Mercedes-Benz E-Class
Mar 21, 2009 | 1999 Dodge Ram
Jan 26, 2009 | 1999 Chevrolet Blazer
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: