Question about 2008 Opel Corsa 1.4

Open Question

Corsa bakkie pdf

Engine noise and oil low pressure

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15557 Answers

SOURCE: timing marks on engine

Use the timing marks on the damper for the crank and bring it to 0 on the cam there are marks that correspond with a mark on the head. Look on autozone dot com and put in the year make and model then look at the free repair guides.

Posted on Oct 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have tried starting my Opel corsa bakkie sport (2007 model) and the engine cranked but it doesn't take (it just won't start). So I just want to know what can the problem be?


Have you checked for fuel delivery to the engine? Test the fuel pressure, the test port in located on the engine in the rail/pipe that supplies fuel to the injectors, the fitting looks like a large fill stem (AKA Shrader valve) on your tires.

Jun 16, 2016 | Opel Cars & Trucks

1 Answer

My corsa fanbelt broke and i can not get the new bed on because the engine mounting prevent me to slip belt overpulleys


Just losen the mounting drop the engine abit until its far enough for the fanbelt to pass the mounting and replace it. May i ask are you sure its the fanbelt according to my knowledge ive never heard of a fanbelt on a corsa bakkie where thd engine mounting can prevent it from coming off

Apr 11, 2016 | Cars & Trucks

1 Answer

1.4 corsa bakkie does it bend valves when timing snap?


check the timing cover
if it is plastic , it will be a belt drive and you could be lucky
if it is metal , it will be a chain and it is an intereference engine which means bent valves
because yo have failed to include details like twin port , car model , year (Remember corsa bakkie are american nome only) it is difficult to be exact with the answer

Jan 15, 2016 | Cars & Trucks

2 Answers

How to tell if oil pump is starting to go out?


1. Engine Noise. With a bad oil pump sufficient engine oil will not get to all parts of the engine, especially the top end, and you will get engine noise with metal parts that would normally be lubricated and quiet knocking due to metal to metal contact. Engines with hydraulic lifters that become noisy can be a sign that they have insufficient oil supply. In addition to the hydraulic lifters, your valve train may begin to make noise if your oil pump begins to fail. Valve train components need to be properly lubricated as well. A bad oil pump can result in a lot of additional noise from your valve train system.

2. Higher engine temperature. Poor lubrication because of poor oil flow generated from the pump will cause friction in the engine and the engine temperature will rise. Good oil flow is essential for lubrication and reducing friction to a minimum.

3. Low oil pressure. The oil pump generates oil flow through the engine but tolerances between metal parts produce the oil pressure. Very worn engine bearings will result in low oil pressure. Thus a worn engine will have low oil pressure even though the oil pump may be fine and there is no issue with the oil pressure relief valve either. However you will also experience low oil pressure due to a failing oil pump because poor oil flow will also result in lower oil pressure.

If your oil pressure warning light has been triggered in your engine, the causes of the low pressure need to be properly investigated because the problem may not be with the oil pump. People replace oil pumps assuming that is always the problem and then still have low oil pressure because the pump was not the problem to begin with.

Dec 05, 2015 | Cars & Trucks

1 Answer

My isuzu kb 250 bakkie 2007 model started to show an oil icon on the dash board, when i check the oil it is on maximum. how do i solve this.


this is a USA web site, so if your car is not USA< answers will be wrong. (x10 not stating the country, silly huh but not one has)
no Bakkie';s here,
lost the operators guide and never read it?
there are 2 lamps for oil.
1 :oil pressure low, engine explodes.
2: time for an oil change.

open glove box and read it
or go to Isuzu buy the guide. and read.?

Feb 11, 2015 | Isuzu Cars & Trucks

1 Answer

Corsa bakkie


see if there is oil in the gearbox. usually a plug on the side of the gearbox. if no oil in it and no visible sign of leakage, then they probably did not put oil in the gearbox.

Jul 22, 2014 | 2007 Opel Corsa 1.4

1 Answer

Noise engine


This sounds like bad main and connecting rod bearing they are worn and when they become worn they make noise. Because of excessive clearance between bearing oil pressure drops therefore starving the essential parts of the engine of oil. Engine needs to be rebuilt or replaced. God Luck

Dec 12, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
2008 Opel Corsa 1.4 Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Brad Brown

Level 3 Expert

15557 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...