Question about 2007 Pontiac Montana
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I went to bulldogsecurity.com and looked up the wiring diagram for this vehcle. However, prior to checking this part, I would check to see if you have a blown fuse. It doesn't hurt and only takes a few minutes. There should be a fuse for that either somewhere on the side of the dash or near the brake pedal area. If not it may be under the hood, but it should be inside the vehicle. You may have multiple fuse boxes. If it has (2) sliding doors it will have a wire for the auto doors in each kick panel (under the plastic trim/molding) when you open the door and look down you will see all of the trim/molding it should snap out or may be held in place with a screw or (2). Once you remove that you should see the wires. It says for the left side it is either light blue or black and the right side is definitely light blue. Trace this wire until you find out where it ends (the motor or switch to control the auto doors) Then test the switch/motor to see if it is bad.
Posted on Mar 02, 2009
When you purchase a wiper blade, the step-by-step instructions are included in the package. It will be a matter of carefully pulling up and out, then reverse the steps to install.
Posted on Jun 08, 2009
the cabel from the heat dial to the heater box behind the dash could be snaped or jamed thus not opperating the lever which operates the flap which open and closes the heat box next to the matrix. or if your coolant is brown in colour it could be your matrix is clogged with sedament and needs flushing out. or it could be your water pump not pumping coolant round your engine or it could be a knackerd thermostat i hope these will help you id start with the easyest first thermostat
Posted on Dec 17, 2009
I beleive you need to change the Power Window Switches Module in the drivers side door panel, as these connections are interlinked within this module and it is usually the first part that fails. Especially that you already changed the switches & motor in the passenger door and it still does not work. Once you remove the dual switch module in the driver's side door, you will understand what I mean. Plus it is really easy to access. Good luck! I have the same model, Claude
Posted on Jun 16, 2010
Tips for a great answer:
Jun 17, 2016 | 2005 Pontiac Montana SV6
Sep 22, 2015 | 2001 Pontiac Montana
Apr 17, 2015 | 2004 Pontiac Montana
Nov 07, 2014 | Pontiac Montana Cars & Trucks
Mar 06, 2014 | Pontiac Montana SV6 Cars & Trucks
Feb 17, 2014 | 2007 Pontiac Montana
May 18, 2012 | 2006 Pontiac Montana SV6
Feb 28, 2009 | 2003 Pontiac Montana
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: