An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: remove front wiper arms. Lift arm, slide out
Just pry them off. Make sure the tab is out the whole way. Sometimes they can be tough to get off. Spray with wd40 it should aid in getting it loose. You could even tap it a few times with a rubber mallet or a light hammer, just be careful. Good luck if this helps let me know.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are two main styles. One style has a nut covered by a piece of plastic at the pivot point, the other style is a metal retainer under the wiper arm. The style with the nut is most common. remove the plastic cover by prying it up at the pivot area, remove the nut underneath, usually 13,14 or 15 mm. then life the wiper off of the glass and wiggle off of the shaft. The retainer style you need to lift the wiper off of the glass and look for a small metal tab near the point where the wiper pivots to lift it off of the glass. then pry the tab gently outward. This releases the arm from the shaft. Just wiggle it free.
To remove the wiper arm from a 91-94 LeBaron Convertible:
1: Remove the blade first. (Hood up was easier on mine)
2: From under the hood, lift arm high enough so you can get the small tab at the base of the arm to slide back toward the windshield about 1/4 inch. The tab won't move back until the arm is lifted enough to make clearance for the tab. With the tab moved back, it will keep the arm from coming back down if done correctly but BE CAREFUL that the blade doesn't spring down onto the windshield or put a towel down in the area to cushion any accidents!
3: With the tab now pushed back and holding the arm from returning down you can now slide (jiggle) the arm off from the shaft. It may seem still locked on but if the tab is out far enough to catch the arm from returing it is far enough and you just need to wiggle just right or maybe spray some WD-40 to help, but you really shouldn't need WD-40
Installation is reverse of these instructions.
You will need a 13-inch wiper blade for the rear window. 1 - When removing the wiper blade lift the wiper arm away from the window. ----- 2 - With one hand holding the wiper arm press the small tab on the underside of the wiper blade where it meets the wiper arm. ----- 3 - Slide the wiper blade off of the arm by pulling the center toward the bottom of the arm.----- 4 - Lightly lay the wiper arm on the window.----- 5 - Prepare your new wiper blade by taking the curved part of the plastic clip and line it up with the curve of your wiper arm. ----- 6 - Lift the wiper arm and press it through the center of the wiper blade up and over the plastic clip. 7 - Pull the wiper blade up until it clicks. Place the arm back on the window.
Yes you have to remove this cover. the arms have a clip thingy on the side I believe. if you genty pry the clip away from the arm then lift the arm a bit to hold the clip out near the base they should slip right off. this is true on a 94 yours should be the same.
if you lift the whole wiper off screen as far as it goes then you will be able to rotate the whole wiper 180 degrees round the main arm. you should see a small plastic tab between the two parts which look remarkably like a u shape.this should depending on how long it is since last change. aloow you to slide blade and housing towards the screen to feed out of the side.
The arms are released by holding the wiper blade fully extended away from the winshield and wiggle the arms off.
The blades are removed by a little tab where the blade hooks to the arm,using a small screwdriver push down on tab,and slide blade off arm but do not let arm slap windshield as it could crack it,I have seen people pull and the blades suddenly come off and the arm slaps down,yor can put a towel or cloth down where the arm sits against the windshield to prevent the possibilty of the arm slapping down.