Question about Toyota 4Runner

Open Question

1997 4runner abs code 32 - 4Runner Toyota Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is the C0265 error code


The ABS EBCM anti-lock brake module is failing causing problems with the ABS pump running constantly, also will drain your battery.
  1. Remove the ABS fuse to prevent ABS motor burn out.
  2. You can still drive your vehicle with the module removed.
  3. We recommend covering the exposed surface of the hydraulic control unit with aluminum foil to keep out water and dirt.
Common Failures:
  • ABS Pump Always Running
  • Codes: C0265, C0267, C0268
  • Pump Motor Circuit trouble code
  • Power Relay trouble code
  • Valve Relay Trouble code
  • Dump Valves (solenoids) trouble codes
  • No Communication
  • Intermediate power loss
http://www.myairbags.com/dtc-code-c0265-abs-ebcm-light/
ebcm-abs-control-module-failure-code-dtc-c0265-c0267-c0268-pump-running-y52j5yjvtwyljepizajwhmfx-1-0.jpg

Nov 28, 2014 | 2001 GMC Sierra C3

1 Answer

What is fault code 32 in corolla 1998


Toyota Corolla 2003 1.4 petrol panel shines light bulb labeled p / s retracted while not feel any problem, some time ago a few times when I wanted to turn to the left or right wheel is braked firmly for a few seconds and relax, this is my happened several times please help

Nov 23, 2013 | 1998 Toyota Corolla

1 Answer

Speed signal n-ab(output)


the fault code is 32 speed signal n-ab output

Sep 25, 2013 | 2004 Land Rover Range Rover

1 Answer

Need codes # to see which wheel sensor is bad on abs


This may assist, but check the relevance for your year model, and make sure you have the correct section of this document for your engine

http://www.turboninjas.com/camry/br.pdf

It is a 12.6 Mb download. You will probably find

DTC No. 31 is for the right front speed sensor.

DTC No. 32 is for the left front speed sensor.

DTC No. 33 is for the right rear speed sensor
DTC No. 34 is for the left rear speed sensor.

Dec 01, 2011 | 1998 Toyota Camry

2 Answers

Check abs system lite on how do you find the code list


ABS Fault Code List 1991 Corvette (C4)
Code Definition
21 Right Front Wheel Speed Sensor Fault
22 Right Front Toothed Wheel Frequency Error
25 Left Front Wheel Speed Sensor Fault
26 Left Front Toothed Wheel Frequency Error
31 Right Rear Wheel Speed Sensor Fault
32 Right Rear Toothed Wheel Frequency Error
35 Left Rear Wheel Speed Sensor Fault
36 Left Rear Toothed Wheel Frequency Error
41 Right Front Solenoid Valve Fault
45 Left Front Solenoid Valve Fault
55 Rear Wheels Solenoid Valve Fault
61 Pump Motor or Motor Relay Fault
63 Solenoid Valve Relay Fault
71 Electronic Brake Control Module Fault
72 Serial Data Line Fault
75 Lateral Accelerometer Fault (Short ot Open)
76 Lateral Accelerometer Fault (Signal out of Range)

Mar 12, 2010 | 1991 Chevrolet Corvette

1 Answer

FAULT CODES 32,31,48 IN ABS SYSTEM FZJ80


CODE 32- FRONT LEFT WHEEL SPEED SENSOR SIGNAL MALFUNCTION. CODE 31- FRONT RIGHT WHEEL SPEED SENSOR SIGNAL MALFUNCTION. CODE 48- OPEN OR SHORT CIRCUIT IN VTA2 SIGNAL CIRCUIT OF THE SUB THROTTLE POSITION SENSOR.

Aug 27, 2009 | 1994 Toyota Land Cruiser

1 Answer

Mitsubishi Pajero, 1999, DiD, Abs and brake light on, no brakes!!


2002 Montero has high pitch sound from dash and brakes are hard

Nov 12, 2008 | 2002 Mitsubishi Montero

2 Answers

Abs fault


Sounds like a steering wheel sensor. Call Mitsubishi back and tell them that, or try a different dealer. Sensor detects the angle of the steering wheel when determining ABS operation parameters (I think)...

Jun 20, 2008 | 1995 Mitsubishi Diamante

1 Answer

Hard Start with trouble code 32


You should have your battery checked, it may be getting old and doesn;t have as much cold cranking power, I don;t think code 32 has anything to do with the slow cranking when cold.


Trouble Code 32 indicates that the Exhaust Gas Recirculation (EGR) valve diaphragm is not where the ECM expects it to be. The ECM controls the diaphragm with a Pulse-Width Modulated (PWM) waveform. The EGR has a vacuum bleed solenoid that adjusts the vacuum applied to the EGR valve based on this pulse width. If there is sufficient vacuum at the EGR valve, a switch closes to send a signal back to the ECM. The absence of this signal is the bases for code 32.
The conditions for setting this code are:
  • no vacuum to EGR (switch open), and
  • Code 33 or 34 (MAF error) is not present, and
  • engine running and LV8 is less than 100, and
  • coolant temperature is > 118 deg F (48 deg C), and
  • the EGR solenoid duty cycle is < 65%, and
  • the above conditions are met for more than 25 seconds


Typical causes for this code include:
1) Faulty EGR valve-to-ECM connection
2) Plugged EGR passages and/or sticking EGR valve
3) Defective EGR valve
4) Defective ECM

May 25, 2008 | 1994 Chevrolet G20

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...