I too have just had my Body Control Module replaced to the tune of $550 and the first time I had the tires rotated and the low tire pressure light comes on (as it always has after rotation), I couldn't find the reset option. I took it back to the Chevy dealer that did the BCM work and they swear it has nothing to do with the BCM.
Tire pressure reset: turn the ignition to the "on" position. pull the head light switch out until you here the first click then push it back in. pull it out and push it in. and pull it out and push it in giving you a total of 3 times push and pull. this should reset the pressure light if done correctly
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this warning light or any other stays on in the dash it is indicating
that the systems control module (or the system sensor in the case of
lights like low oil pressure, door open indicators etc.) has detected
a fault, it then disables the system (this applies to ABS,TCS, TCM,
SRS, TPMS and BCM faults and others) as long as the light is on. You
must now have the dealer hook up a special electronic diagnostic tool
and "scan" the system for the fault code that is stored for
of Abbreviations. ABS Anti-lock brake system. TCS Traction control
system, TCM Transmission control module, SRS Supplemental restraint
system, BCM Body control module. TPMS Tire Pressure Monitor System
Hi, if you see this TPMS icon illuminated, it means your vehicle has a low tire. STOP, and check the inflation pressure in your tires. This warning light will come on if tire pressure in any of your tires falls more than 25% below the recommended inflation pressure (refer to your owners manual, or the tire inflation decal in the glovebox, driver door pillar or gas tank filler cap lid for tire inflation pressure recommendations).
The TPMS warning light should come on for about one second when the ignition key is first turned on for a bulb check. It should then go out if all of the tires are properly inflated. If it does not go out, or it comes on while driving, you have a low tire.
If the TPMS warning light is flashing, it indicates a fault has been detected in the TPMS system that will require further diagnosis. Common faults include a bad tire pressure sensor, a defective keyless entry receiver module, a fault in the TPMS or body control module (BCM), or wiring problems in the keyless entry/TPMS/BCM circuit.
Page 2-46 of your owners manual. If you don't have one you can get on online version from the chevrolet website. Just click the owners link at the top of the page.
TIRE MON (Tire Inflation Monitor Reset) This feature allows you to reset the tire pressure monitor after checking all tire pressures. To clear the LOW TIRE PRESSURE light from the instrument panel cluster and reset the low tire pressure monitor do the following:
1. Scroll, using the SEEK/PSCAN up or down arrows, until TIRE MON appears on the display. 2. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. 3. Press the TUNE/DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
Hello, SERV-TPM means Service Tire Pressure System. There could be several items to bring up this message. It could be a bad sensor in one of the wheels. It could also be the sensors require programming. The best way to find out is to have the system checked for codes. Before you do any of the above. check the placard on the drivers door for the correct pressure then check each tire with a gage. Thank you
The only way to reset the low tire pressure light is to fill the tires to the recommended pressure. If all of the tires on the ground are at the proper inflation remember that the spare also has a pressure sensor so you will have to check it also. If one of the tire pressure sensors is damaged from remounting a flat or otherwise it will not send a signal to the low tire pressure module.
The tire pressure monitor detects any changes in the tire inflation
pressure. Therefore, it must initialize and store it in its memory if
the tires or wheels have been replaced, re-inflated or the tires have
been rotated. You should be able to re-initialize the system by following these
1. check and make sure that your tires are inflated to the correct pressure
2. turn the ignition switch to the ON position. If the low tire
pressure warning light comes on, push and hold the tire pressure
warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns
off and then release the switch.
3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.
4. initialization is *not* completed until driving at the vehicle speed
of 19 mph or over for more than one hour. the tire pressure monitoring
starts when initialization is completed.
the last time I had a flat the tire pressure monitor came on a little too late. once the tire was replaced and brought up to pressure it reset itself. check your spare tire. have the tire that was repaired still has the module on the rim. they may have given you a different rim