Question about 2005 Buick Rendezvous

Open Question

Rear coil spring on buick rendezvous

How to change rear springs on two wheel drive

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 14036 Answers

SOURCE: 2002 Buick Rendezvous - Rear Wiper, Back Up & Rear Plate Lights

look for rear wiper fuse and relay.because both circuits is tie together . look in glove compartment for the manual .it will show where all fuses and relays located.

Posted on Apr 07, 2009

Ad
Molson02536
  • 3854 Answers

SOURCE: firing order from coil pack to spark plugs for

The firing order is 1-6-5-4-3-2  the engine from the passenger side to the drivers side, radiator side 1-3-5 and on the fire wall side 2-4-6
The 3 coil from the radiator to the fire wall. #1 coil 1-4 #2 coil 5-2 and coil #3 3-6 Good luck and keep me posted, be glad to help. Its harder to explain then show, hope i made sense. 

Posted on Jul 01, 2009

  • 497 Answers

SOURCE: 1995 Buick Regal Rear Leaf Spring Insulator Kit -

the job is extremely hard unless you have all the tools and a hydraulic lift like all mechanic shops. the insulator should work. the springs do need removal to install the insulator kit. Find a good mechanic.

Posted on Aug 28, 2009

  • 31 Answers

SOURCE: 2006 Buick Rendezvous cxl broken rear hatch strap!

I believe there is a recall for that feature. but i am not 100% sure. it was recalled on 2004 rendezvous

Posted on Feb 07, 2010

  • 3 Answers

SOURCE: i have a 2002 buick

The fluid in the versa trak AWD in the rear is old and needs to be drained and refilled. After you drain and refill it, make a bunch of sharp left and right hand turns, then drive it for 10 minutes. Drain and refill it for the second time and problem solved. Use only versa trak fluid available at any GM dealership. Your vehicle takes 2 bottles (16.9 oz) each change. There is a TSB at the Buick dealership on this now.

Posted on Oct 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1996 buick regal custom has no coil springs on rear how do i change the shocks


26083109-sgzmnh3u5bmrsfnwqwi1so0h-1-0.gif Removal:
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle with jackstands.
  3. Remove the rear wheel and tire assembly.
  4. Scribe the strut-to-knuckle for proper installation.
  5. If equipped, remove the auxiliary spring, as outlined in this section.
  6. Remove the jack pad.
  7. Install rear leaf spring compressor tool J-35778, or equivalent. Refer to the Transverse Spring Assembly procedures in this section for installation details.
  8. Fully compress the spring, but do NOT remove the retention plates or the spring.
  9. Unfasten the two strut-to-body bolts.
  10. Remove the brake hose bracket from the strut.
  11. Remove the strut and auxiliary spring upper bracket from the knuckle.
To install:
  1. Position the strut to the body and knuckle bracket.
  2. Install the strut-to-body bolts and tighten to 34 ft. lbs. (46 Nm).
  3. Install the strut to the knuckle, aligning the scribe marks and tighten the bolts to 133 ft. lbs. (180 Nm) for 1988-94 vehicles. For 1995-96 vehicles, tighten the bolts to 122 ft. lbs. (165 Nm).
  4. Install the brake hose bracket.
  5. Remove the spring compressing tool.
  6. Install the jack pad and tighten the retaining bolts to 18 ft. lbs. (25 Nm).
  7. If equipped, install the auxiliary spring.
  8. Install the wheel and tire assembly and install the lug nuts finger-tighten
  9. Carefully lower the vehicle, then tighten the lug nuts to 100 ft. lbs. (136 Nm).
  10. Connect the negative battery cable.

Feb 05, 2016 | Buick Cars & Trucks

1 Answer

How do I check abs that its wheel sensor


Pull the plug from the wheel sensor and go buy a multi meter from walmart for 20 bucks set it to ohms and check resistance between terminals on sensor. .1 means circuit open if thats the case you need new wheel bearing with sensor.

Sep 17, 2014 | 2004 Buick Rendezvous

1 Answer

Remove rear coil springs


This could be a very dangerous job use extreme caution.
all tension must be removed from springs use a spring compressor.

Apr 20, 2014 | 2005 Buick Rendezvous

1 Answer

Rear Tires: Balding


if it has independent rear suspension then have the suspension rubbers checked and replace if necessary. Next for all wheel alignments it is essential that the rear end is aligned first to stop this tyre wear before the front wheels are aligned . IF you have leaf springs at the rear check for axle alignment and broken centre bolts or worn rubbers at the centre bolt mounts.

Mar 24, 2014 | 2003 Buick Rendezvous

1 Answer

The rear wiper on my 2006 Buick Rendezvous does not apply enough pressure upon the surface of the glass for the wiper blade to clean water. It skips over the water.


lift arm away from screen if blade and arm pressure spring intact and working, bend arm inwards to increase pressure

Mar 03, 2014 | 2006 Buick Rendezvous

1 Answer

What makes the rear wheel lean inward on a 93 Buick regal?


Your rear springs are probably the cause. Over time the springs get weak and cause the rear to sag. If you have independent suspension, which the 93 does, it will cause the tires to lean in a little. This will also cause the tires to prematurely wear on the inside. I think that car has leaf springs not coil springs. Your shocks are probably shot also, but that would not make it sag, that would just make the car very bouncy.

Feb 10, 2014 | Cars & Trucks

1 Answer

AWD disable and anti-lock light is on after changing a rear coil-spring. I had to disconnect the speed sensor from the wheel hub assy (I did reconnect). Any ideas on fix? It was sugested to repalce...


check wires at plug and follow wiring under plastic casing. had similar problem after changing wheel bearing and found broken wire. spliced wire and lights are off now

Nov 08, 2011 | 2002 Buick Rendezvous

1 Answer

How to replace the rear shocks on a 1998 nissan maxima


REMOVE REAR SEAT AND PACKAGE SHELF TO GAIN ACCESS TO THE UPPER SHOCK ATTACHING NUTS.REMOVE UPPER ATTACHING NUTS. RAISE VECHICLE REMOVE REAR WHEEL AND SUPPORT THE LOWER CONTROL ARM WITH A JACK REMOVE LOWER SHOCK ABSORBER MOUNTING BOLT. REMOVE SHOCK ABSORBER ASSEMBLY FROM THE VECHICLE. COMPRESS THE COIL SPRING WITH THE PROPER SPRING COMPRESSOR TOOL. REMOVE CENTER RETAINING NUT HOLDING THE UPPER MOUNTING INSULATOR. SLOWLY DECOMPRESS THE COIL SPRING.REMOVE THE MOUNTING INSULATOR AND THE COIL SPRING. REMOVE THE COIL SPRING. TO INSTALL COMPRESSED COIL SPRING ONTO THE STRUT ASSEMBLY. BE SURE TO THE END OF THE SPRING IS IN THE NOTCH ON THE LOWER SEAT.INSTALL UPPER MOUNTING INSULATOR. YOU WILL NEW LOCKNUT FOR THE CENTER RETAINING NUT OF THE COIL SPRING. CENTER RETAINING NUT AND TORQUE THE NUT TO 13 TO 17 FT LBS. SLOWLY REMOVE THE SPRING COMPRESSOR TOOL. INSTALL SHOCK ABSORBER ASSEMBLY IN THE VECHICLE AND INSTALL THE MOUNTING FASTERNERS AND TORQUE LOWER MOUNTING BOLTS TO 72 - 87 FT LBS. INSTALL WHEEL.LOWER VECHICLE. WARNING COIL SPRING UNDER EXTREME LOADS WHEN COMPRESSED.BESURE TO PROPERLY ALIGN THE SPRING WITH THE COMPRESSING TOOL TO PREVENT PERSONAL INJURY FROM THE SPRING RELEASING UNEXPECTEDLY.

Feb 02, 2011 | 1998 Nissan Maxima

1 Answer

04 jetta


Check the rear springs and be sure the coils are not broken. Both of them broke on my 99 A4, right at the bottom where the spring sits on the perch. It didn't cause problems in driving since the continuous part of the spring was seated, but the excess seated spring coil was snapped off. I've seen it on other A4s as well, so I wouldn't be surprised if your Jetta has a similar problem. Dismount the rear wheels and inspect the coil springs - if they're broken, it'll be evident. If they are, you can likely pick up another set from someone on eBay or www.vwvortex.com at a reasonable price.

Sep 21, 2008 | 2004 Volkswagen Jetta

Not finding what you are looking for?
2005 Buick Rendezvous Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...