Question about 2003 Lincoln Town Car

Open Question

Fuse window washer - 2003 Lincoln Town Car

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sx4 window washer glass no fonction


front washer dead.
replace the blown fuse. in the fuse box, 1 of 2 boxes.
the operator guide in the glove box, tells you fuse name. under fuses

Jan 09, 2014 | 2007 Suzuki SX4

1 Answer

My window washer for my 2006 corolla will not work.


check window for low fluid if fluid level okay check fuse.if fuse okay either window washer switch failed or washer motor faulty.

Aug 04, 2013 | Cars & Trucks

1 Answer

Cant hear motor running when i use window washer


Could be fuse or pump. Check the fuse first. If the pump motor is bad, it should not be expensive at all. The unit is fairly easy to get to, so not much labor involved, and the cost of a new pump...well, its a toyota, and its an import...might make you do a double take for such a tiny part. You might look for a used one at a salvage yard. Or any parts store could order the pump cheaper than the toyota dealer. Shop around!

Nov 23, 2012 | 2004 Toyota Yaris

1 Answer

Which fuse for window washer dodge grand Caravan


That would not be a fuise problem, the pump is just defective I bet or the washer nozzles plugged up. All fuse location are listed in the owner's manual

Oct 26, 2012 | 2002 Dodge Grand Caravan

1 Answer

Location of fuse for window washer on 2006 KIA SEDONA and location of window washer pump


fuse is under hood in fuse compartment the washer pump is under right front fender well on bottom of washer bottle

Jan 19, 2011 | 2006 Kia Sedona

1 Answer

My window wipers work but my window washer fluid doesn't work is there a fuse for it and if so were is it cause I can't find. Also under the hood fuse box has CMH on it but when I opened it up there was...


It sounds like the seal in the washer pump has worn and let washer fluid into the little motor, causing it to corrode and seize. Pump is usually located on bottom of washer fluid bottle.

Aug 20, 2010 | 1990 Toyota Pickup

1 Answer

Window washer unit not working. Is there a fuse for it? I have no diagram or manual . If there is a fuse which number fuse is it?


Found diagram for fuse panel online, Found fuse #12 controls window washer unit.Replace fuse, now it works

Jan 08, 2010 | 1999 Ford Explorer

2 Answers

Need to know the fuse box diagram, what fuse pertains to the wipers... the wipers quit today and I do not have the manual. I opened the hood and see the fuses etc, but have no idea which one is for the...


fuse panel in car on driver side by left knee under dash


Visual Inspection Chart
Mechanical Electrical
  • Wiper linkage
  • Washer nozzles
  • Washer pump hoses
  • Central junction box (CJB) Fuse 211 (15A), Fuse 215 (30A)
  • Multifunction switch
  • Rear window wiper switch
  • Wiper run/park relay
  • Wiper high/low relay
  • Windshield wiper motor
  • Windshield washer pump
  • Rear window washer pump
  • Circuitry
  • Battery junction box (BJB)
  • CJB
  • Generic electronic module (GEM)

Dec 11, 2009 | 2003 Mercury Sable

1 Answer

99 Nissan Quest real wiper runs continually when ignition is on


Principles of Operation
Operation of the windshield wiper and washer is controlled by the front wiper/washer amplifier assembly. The front wiper/washer amplifier input comes from the multifunction switch by means of a voltage divider circuit. A constant voltage is applied to the multifunction switch by the front wiper/washer amplifier. When the multifunction switch is moved into the LO, HI, or intermittent position, the voltage is directed through a series of resistors. This results in various voltages being returned to the module for each switch position. The module then grounds the appropriate circuit, based on the voltage signal received back from the multifunction switch. This causes the wipers to run intermittently, or at the appropriate speed. Voltage is supplied to the wiper motor by the CJB fuse F46 (20A).
When the multifunction switch wash button is depressed, it bypasses all of the resistors returning a full voltage signal to the module. The module then grounds the appropriate circuits to operate the windshield washer pump for as long as the switch is depressed. The windshield wiper speed is dependent on the position of the windshield wiper/washer switch.
Voltage for the windshield washer pump is also provided by CJB fuse F46 (20A).
Operation of the rear wiper and washer is controlled by the rear wiper/washer switch.
Voltage is supplied to the rear window wiper motor by the fuse junction panel fuse F44 (10A).
The rear window wiper motor ground is made or broken by the rear wiper/washer switch. When the rear wiper/washer switch is moved into the WIPER position, it grounds the rear window wiper motor circuit, causing the rear window wiper motor to run once every 10-15 seconds.
Voltage to the rear washer pump motor is also supplied by the CJB fuse F44 (10A). The rear washer pump is directly controlled by the rear wiper/washer switch which makes or breaks the ground for the washer pump motor, depending upon its position.
If the vehicle is equipped with a movable liftgate glass, a liftgate glass switch is utilized to prevent rear window wiper operation when the liftgate glass is open. This same switch also causes the rear window wiper to drop down approximately three inches when the liftgate glass latch is released.
------------------------------------------------------------------------------------------
  • The wipers stay on continuously — rear wiper
  • Circuit.
  • Rear wiper/washer switch.
  • GO to Pinpoint Test L .


---------------------------------------------------------------------------------------------
Measure the resistance between rear wiper/washer switch C288 pin 6, component side and rear wiper/washer switch C288 pin 2, component side.
  • Is the resistance less than 5 ohms with the switch depressed, and greater than 10,000 ohms with it released?
sxv~us~en~file=arrow.gif~gen~ref.gifYes GO to L2 .
sxv~us~en~file=arrow.gif~gen~ref.gifNo INSTALL a new rear wiper/washer switch. TEST the system for normal operation.

Measure the resistance between rear wiper/washer switch C288 pin 6, circuit WB08 (BU/YE), harness side and ground.
  • Is the resistance greater than 10,000 ohms?
sxv~us~en~file=arrow.gif~gen~ref.gifYes INSTALL a new rear wiper /washer switch. TEST the system for normal operation.
sxv~us~en~file=arrow.gif~gen~ref.gifNo REPAIR circuit WB08 (BU/YE). TEST the system for normal operation.

65501dd.gif 7e9d21a.gif

Dec 08, 2008 | 1999 Nissan Quest

2 Answers

Rear window washer works, front windshield washer does not.


Yes their are two seperate pumps. The pum is located in the driver wheel well.

Check fuses then check the pumps. Make sure you are getting voltage to both pumps.

Nov 29, 2008 | 1994 Acura Integra

Not finding what you are looking for?
2003 Lincoln Town Car Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...