Question about Cars & Trucks
I would expect this to show up as a code p1100 or 57 or nothing until you have the codes read.
Posted on Apr 21, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: mass airflow meter
It is fitted to the air filter outlet hose (the one which goes from the air filter to the turbo) and it is quite literally right next to the air filter. It has a wiring plug to it.
Posted on Jun 23, 2008
SOURCE: 2002 bmw 325i running rough
Did you replace your fuel filter when you did the pump? At lower RPM's the engine would be starving for fuel. Another cause could be your throttle position sensor. It is what shifts your transmission at predetermined shift points as you throttle up and down. It is also what kicks down your engine when you are stopping or slowing down as you go down through the gears. Hope that helps!
Posted on Jan 11, 2009
The check engine light could be any number of things and the only way to find out is have the codes scanned. The brake light issue is common on E46 3 series. It is an issue were the brown ground wire that goes into the lamp housing melts at the connector causing a loose ground connection. The connector needs to be replaced and also add additional grounding wires to prevent further issues. And for fuel additives either use the cheveron techron, or the bmw fuel additive(the bmw stuff is the exact same thing, so just use which ever is cheaper).
Posted on Mar 12, 2009
SOURCE: Change clock on 2002 BMW 325i
hello jsosa, if I remember correctly, you need to turn and hold the right button on the instrument cluster. the button only turns a little and has a detent.
Posted on Apr 09, 2009
yes their is a way to replace the mass air flow. Get a can of brake clean or throttle cleaner, throttle cleaner is going to work best. remove the until and spray it down with throttle clean, let it dry for about 15 min. and reinstall it.
Now a little warning for you, IF their is no visual damage to the mass air flow then you can do this successfully. Now the reason why I always replace them instead of spraying them down is because is MOST cases the mass air flow will start acting up again. Sometimes it takes a weeks, sometimes months, sometimes years its hard to say.
But the worst you have to loose, is it doenst work an your out 5 bucks for the can of fluid.
Posted on May 13, 2009
Tips for a great answer:
Jul 09, 2016 | Cars & Trucks
Jan 09, 2014 | Cars & Trucks
Dec 24, 2012 | BMW 316i Cars & Trucks
Jan 04, 2011 | 1994 BMW 3 Series
Jun 21, 2010 | 2002 BMW 3 Series
Jan 13, 2010 | 2002 BMW 5 Series
Jul 24, 2009 | 2002 Chevrolet Blazer
Apr 05, 2009 | 2002 BMW 3 Series
23 people viewed this question
Usually answered in minutes!