Question about Chrysler Sebring

1 Answer

I lost the manual to my chrysler sebring 2003. i can't seem to locate the correct fuse to replace for rear lights. the guide on back of fuse cover is a little confusing. thanks

Posted by on

  • jn_cas Jun 19, 2009

    Thanks Thundergod & emissionwiz! i didn't check the underhood fuse box, i'll check that one as well. i did replace blown fuses located in box on driver side, but no luck! the rear light comes on, but no stop light. I'm going to replace bulb. hopefully that will solve problem.

  • yadayada
    yadayada May 11, 2010

    did u look in the underhood fuse box? check the "Park Lights" fuse in that box

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,982 Answers

Faster than looking for a diagram, use a test light and probe back side of all fuses and replace any that have failed. (do this with key on and off) should not take more than ten minutes doing that. If fuses all check out as good the problem is elsewhere.

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse located for the trunk on a 2005 Chrysler Sebring


Fuse box is under the hood. You will have to remove the fuse box cover - and the label for which fuse is in which slot is on the inside of the fuse box lid.

Jun 04, 2014 | 2003 Chrysler Sebring

1 Answer

2003 chrysler sebring radio power locks and trunk


0dca3b02-2ac7-4340-af52-b9b4b8689b6d.jpgThis is the fuse panel inside the vehicle on the left side of the end of the dash. I think you have to open the door in order to see the cover to expose the fuses. The fuse I have marked is the only fuse I see in all the wiring diagrams for the circuits you described. hope this is it and a simple fuse change corrects the problem for you.

Jul 25, 2013 | 2003 Chrysler Sebring

1 Answer

How to fix Honk of my 203 chrysler sebring... When I press on the honk pad, nothing happend. I am sure it must be a small job. Please guide with any possible directions.Thanks


Try checking the fuses. Check the ones in the panel on the drivers side; there should be a cover, remove it and there should be a chart telling what the fuses are for.

Aug 01, 2011 | 2003 Chrysler Sebring

2 Answers

Guage lights dont work on my 2003 cheysler sebring?


There is a fuse in the panel that might be blown. Look in your manual for its location and replace it. This should be the fix. Good luck.

Mar 06, 2011 | 2003 Chrysler Sebring

1 Answer

Cannot locate the correct fuse for the speedometer light


The plastic cover usually has on the back a diagram of the fuse box which can guide you to the right fuse. If it doesn't have one, you can use a test light to see which fuse is blown.

Nov 24, 2010 | 2004 Chrysler Sebring

1 Answer

My horn does not work at all in my 2006 chrysler sebring and my inside lihgts also does not work


If your horn is not working and your inside light is not working either your fuse has been removed. (Located on the left side of the steering wheel) pull back the plastic handle and use the chart there to see if the fuses are all in the correct spots. If this is not the case you may have to have the fuse replaced. Lastly there could be and issue with your horn assembly which is easily fixed and the dome light could be a seperate problem.

Jan 12, 2010 | 2006 Chrysler Sebring

2 Answers

I need to find where to replace the flasher on my chrysler sebring 1997 lxi. the blinkers arent working and the guy at the auto shop said it was under the dash but i dont see it


Many newer cars have a cover over the fuse panels, look for a small "door" that you can remove to gain access. The owners manual may give you a better indication.

Jan 05, 2010 | 1997 Chrysler Sebring

1 Answer

2006 lighter fuse


Either the guide is inside of the cover or it is written in raised letters above each fuse

Jul 13, 2009 | 2006 Chrysler Sebring

1 Answer

What is the fuse for the lights on the car i do not have a manual with me


your cars fuse box should have a guide telling you which fuse is what, and your fuses are usually located on the drivers side under the dash "close to where the pedals are" and also under the hood, it should say something with the word fuse in it.

Jul 12, 2009 | 2003 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...