Question about 2008 Pontiac Torrent

Open Question

Windshield washer fluid is not working front or back i have no voltage at the fluid pump

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1201 Answers

SOURCE: windshield washer does not pump fluid

The pump works off the same circuit as the wipers, so it would be same fuse. Most likely the pump is no bad.

Posted on Jan 31, 2009

Ad
  • 6982 Answers

SOURCE: 1998 Grand Prix GTP windshield washer (full) not pumping fluid

Not difficult to remove inner fender liner (screws around wheel well opening and sometimes a few more)
Pump is available from most auto supply stores and easily installed in tank. Check power at the motor before removing it to make sure the motor is bad and the problem isn't somewhere else.(if no power there problem can be solved as easily as using a push button to get it powered up and as complicated as replacing the multi-function switch...pretty much your choice)

Posted on Jan 04, 2010

handygirl911
  • 65 Answers

SOURCE: I have a 2003 Pontiac gran prix. The windshield

Check on the passenger side where the tubing is routed along the top and the turns the corner where it is supposed to be under the gasket. Mine had not been working for a long time and today when I replaced my serpentine belt, I happened to noticed the the tubing was pinched and cutting off the fluid. I rerouted it under the gasket like it is supposed to be after I straightened out the tubing.

Posted on Dec 15, 2010

jimmybrown67
  • 835 Answers

SOURCE: 2008 torrent washer fluid pump

it has a relay for it

Posted on Dec 21, 2010

  • 610 Answers

SOURCE: I have an 07 Pontiac

is it frozen? don't know the temp where you are , but here in Green Bay, Wi. we've had a run of this lately. if that's not the case, then the pump may be running but not able to pump, which will require replacement of the pump motor. good luck!

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

1 Answer

Windscreen washer doesn't always work yet has fluid


Windshield Washer Pump and System Diagnosis - YouTube

? 10:00
https://www.youtube.com/watch?v=0SdUhyQF4tY
Sep 9, 2012 - Uploaded by RatchetsAnd Wrenches
You'd think the pump would run continuously, but it doesn't run at all. .... Do some cars have a separate fluid pump for front and rear washer nozzles or is it always the same pump that makes both front and rear work? Thanks ...

Windshield Washer Repair ' The Family Handyman

www.familyhandyman.com > Skills > Automotive
... or a dead pump. Here's how to diagnose and fix both problems. ... TypicalWindshield Washer. Follow the ... If you hear the pump going but don't get fluid, you probably have clogged nozzles. Lift the ... If it doesn't, replace the pump. The main ...

How to Troubleshoot a Windshield Washer Pump: 8 Steps

www.wikihow.com > ... > Auto Exterior and Interior Accessories

wikiHow

Jan 21, 2016 | Cars & Trucks

2 Answers

The windshield washer for both the front and back doesn't dispense fluid. The pump motor seems to be working. I tried tracing the line to see if it had become disconnected, but i couldn't follow it all the...


try and fill up the washer bottle with water for test and use it. if you hear the pump work keep using it till you see where fluid is leaking out. my guess is a hose is broken and all the fluid is leaking out

Dec 16, 2010 | Jeep Liberty Cars & Trucks

1 Answer

Windshield washer not workn


Hello my name is Ben. If you have plenty of fluid in the washer reservoir and all fuses are good your next step is to check for power at the windshield washer pump. Place the transmission in Park, set the parking brake and chock at least one rear wheel. Slightly loosen the front driver's side lug nuts and then jack up that side. Support the vehicle with a jack stand. Now remove the wheel and fender well liner to gain access to the washer pump. With a 12 volt test light check for voltage while someone operates the washer. If voltage is present, you probably have a bad washer pump. If no voltage is present then you will need to trace the wiring back to the problem. Hopefully you find a bad wire before the switch.

Aug 28, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

The windshield washer fluid isnt coming out for


Yes there are two pumps located in the wiper fluid reservoir. If your in a bind, you can switch the plugs and small hose that go to them because they are both the same. The upper pump operates the back, and the lower pump operates the front. The back won't work until it gets replaced, but it beats driving backwards.

Feb 25, 2010 | 1995 Ford Windstar

1 Answer

Mercury villager 1994 washer pump not working


the pump motor likely is bad. get a used washer fluid reservoir at a pick n pull yourself or at car-part.com. page with * is lowest cost.

Pump and Reservoir, Windshield Washer Removal
  1. Disconnect the battery ground cable (14301).
  2. Raise and support the vehicle.
  3. Remove the RH wheel (1007).
  4. Remove the RH front fender splash shield (16103). Refer to Section 01-02 for the removal procedure.
  5. Remove the windshield washer reservoir top bolt.

  6. Disconnect the windshield washer reservoir fluid level sensor electrical connector.
  7. Disconnect the rear window washer pump electrical connector from the rear window washer pump.
  8. Disconnect the windshield washer pump electrical connector from the windshield washer pump (17664).
  9. Place a suitable drain pan under the windshield washer reservoir (17618) and drain the washer fluid.
  10. NOTE: The rear window washer hose end is color-coded, matching the connector on the rear window washer pump. Match the colors to ensure proper installation.

    Disconnect the washer hoses from the windshield washer pump and the rear window washer pump on the windshield washer reservoir.

  11. Loosen the two windshield washer reservoir side bolts.
  12. Remove the windshield washer reservoir by sliding it out of the side slots.
  13. Remove the windshield washer pump.

    Installation
To install, reverse the removal procedure. Tighten the lug nuts (1012) to 98-118 Nm (72-87 lb-ft).

Sep 09, 2009 | 1994 Mercury Villager

3 Answers

Windshield washer Pump doesn't run, but the pump checks out good


there is another small relay box just below the windshield washer reservoir about 11/2" wide x about 4" long the washer pump relay is in there



Nov 23, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...