Question about Chevrolet Impala

1 Answer

Hpw do I remove 216 motor from my 1950 fleetline

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    A rookie expert who has answered 20 questions on their first day.


    An expert who has answered 20 or more questions within one hour.

  • Chevrolet Expert
  • 125 Answers

First thing to do is remove the hood,next disconnect one of the battery cables,( I assume you have a chain hoist or a portable hoist)
if you don't have you can rent one for so much a day. make sure you put pulling chains on the motor, you will probably have to take off the valve cover when you get that done remove two head bolts, one at hook the chains through the head bolts, now make the chains are taught front of the motor and one at the back. now on each side of the motor (lower part of motor) you will fine the motor mounts, make sure you don't have the chains to tight just snug, when you have the motor mounts bolt loose, not taken clear out. You will to disconnect the drive shaft from the truck, I think it will a 7/16 or a 1/2 inch bolts you have to remove, another thing , have a pan ready because the transmission oil will leak out the tail of it. ok here we go,find the tranny mounts and remove the bolts(be darn careful under there. something I did not mention before, make sure you remove the radiator and of course all the wires and fuel lines oil lines,etc.I hoped I helped have a happy thanksgiving.

Posted on Nov 15, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is number one spark plug wire on dist for 1950 gmc 216 ci

Since distributor may have been moved, best is to turn engine with #1 plug out until you get to TDC compression stroke on #1, then remove dist cap to see where rotor is pointing.

Feb 13, 2015 | GMC Cars & Trucks

1 Answer

Ù?دÙ? سÙ?ارة Ù?ادÙ?Ù?اÙ? Ù?Ù?Ù?Ù?Ù?رØ

If it means what I think it means, it's because they started putting computer modules in cars, if you ask me. You gotta hook your car up to another computer just to find out what's wrong. #@&*78];/>

All those !$&(&^%$# sensors, and they cost way more than their worth.

Start walking more. It's better for your health and the environment.


Nov 06, 2010 | Cadillac Brougham Cars & Trucks

1 Answer

The freeze plugs on my 1950 216 cubic inch chevy seem impossible to get out . after twisting cutting and turning i thought this cant be right almost seems like they are part of the engine block .i then...

freeze plugs can be a pain to remove, i used to drill and install a metal screw to pry it out, careful not to scratch the surface on the block, us a slight bit of sealer with the new one

Oct 16, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

Ù?دÙ? Ù?Ø´Ù?Ù?Ø© فÙ? عÙ?Ù?Ù?Ø© اÙ?دÙ?راÙ?...

Cannot read you issue, please retype it and resubmit--thanks.

Oct 04, 2010 | 2002 Lexus RX 300

1 Answer

Wiring diagram to 1950 Chevy V6 engine for dad.

they had straight 6 engines back the which was a 216 cubic inch motor

Sep 01, 2010 | Chevrolet Classic Cars & Trucks

1 Answer

Ù?Ø´Ù?Ù?Ù? فÙ? دائرÙ? اÙ?Ù?Ù?اء (اÙ?Ø

Serious problem. You need about 2 gal of gas and a match

Apr 11, 2010 | 2008 Volvo XC90

1 Answer

Hpw do I install an ac/heat blower unit

disconnect the negative battery cable
Disconnect wiring harness and rubber tube to motor. Then remove the 3 screws and remove motor and cage
Use a vice grips to put on cage axle and remove the cage and axle and place on new motor and reinstall

Apr 08, 2010 | 1988 Volkswagen Cabriolet

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides