Question about 2004 Chevrolet TrailBlazer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
We have the same problem with our malibu. What I found is that the hood release handle inside the car gets stuck on the housing around the driver's side feet. Check if your handle is getting stuck there too because I thought for the longest time that the cable was the problem.
Posted on Feb 09, 2009
SOURCE: 2000 Chevy Blazer with Broken
Hi: Have someone push down on the hood while you pull the release cable, while cable pulled have them lift up on the hood and it should release. Hood is probably released but stuck, latch out of adjustment or hood support rubbers ( located on rad support) are set to high causing latch to be to tight.
Posted on May 21, 2009
if you can get a pry bar or a screwdiver under the hood and push on the mechanism that the cable pulls the hood will open.then you need to replace the cable.
Posted on Jul 28, 2009
I have this same problem. You have to take a screw-driver (philips) and look between the hood and the grill and you will see the hood latch assembly. There will be a large gauge wire with a loop about the size of a large philips head screw-driver. This is the release. Take the screw-driver and push the wire towards the drivers side door and it will release.
Posted on Sep 04, 2009
Testimonial: "THanks, solution concise and tells me where to look and how to do it. Because I was looking to taking off my grill and not sure how to do that."
You need to find where the front end of the cable attaches to the latch mechanism which may require removal of the plastic pan underneath behind the radiator. Once you find it you can manual pull it using needle nose pliers and a open end wrench or equal as fulcrum. Once you get it to pop then you can replace as needed.
Posted on Nov 13, 2009
Tips for a great answer:
Jun 03, 2016 | Cars & Trucks
Feb 25, 2016 | 2005 Chevrolet Chevrolet Tahoe Z71
Dec 20, 2015 | 2004 Chevrolet TrailBlazer
Aug 20, 2015 | Cars & Trucks
Mar 10, 2011 | 2000 Chevrolet Silverado 1500
Nov 27, 2010 | 1983 Chevrolet C1500
Apr 30, 2010 | 1986 Chevrolet Chevy
Feb 03, 2010 | 2004 Chevrolet Venture Passanger
May 09, 2009 | Chevrolet Blazer Cars & Trucks
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: