- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi from uk if your front and rear fogs are of the same specification as uk models of hyundai ? these front and rear fogs although the switches are on these lamps will not operate till you turn headlight on dip beam reason being that if weather conditions req fogs on then you should have rear and front side light and head lights on however if you inadvertently forget to switch front or rear fogs off when you turn other lights off when parking car ? you will/should hear the warning bleep as you open drivers door as you would if side/rear lights are still switched on ? hope this helps?
The foglamp bulbs can be accessed and removed from underneath the
bumper without tools, although it is a tight fit. Turn the lamp socket
1/4 turn counter-clockwise to remove from the rear of the housing. Note
that the screw in the front of the foglamps is for alignment only and
does not remove the outer lens. The fog lamp housing is attached to the
fascia with two nuts which can be removed with a 10mm socket.
Fog lamps can be added to most Laredo model WJ's that came from
the factory without them. Mopar kits are available that include two fog
lights, wiring harness, and steering column switch. Click HERE for part numbers and other information on these kits.
Your only hope is ---
Do a google search on auto salvage.. Many of them all over the country are online now and thre are lots of them.. if you find a mach for your make modle & year, you are getting warm.. If they have that jeep - they can ship the part to you..
hi from uk the fog lghts? i assume front fog lamps ? the head lights have to be on dipped beam then the fogs will also work but in uk this is so as to prevent fogs only being used (blinding oncoming traffic ) if weather conditions req fogs to be used for poor visibility ? then the side/tail and h/lights must also be on like wise the rear fog light/s operate the same way hope this helps and makes perfect sense ?? all above is assuming bulbs have been checked and fuse/relay and power to each lamp ?
hi from uk if you are meaning rear fog light/s ? they will be on the switch that has a picture of lamp with horizontal lines ? these will only work with headlight on also if you are meaning front drive/fogs then the same goes for these ie a similar switch near to lights switch or you may have to turn on h/lights then pull outwards the actual switch as on uk cars? the idea being if weather conditions req fogs then h/lights must be on also preventing driving on fogs only and no obligatory side/tail and h/lights here in uk hope this assists you locating switch ? wish you merry xmas
Your fog lights should not work with high beam... they should work with the low beams. they are connected wrong, which probably drew too much current through the light switch burning out the contact points for the parking lights in the switch
Start by Fixing the fog light connections to work with low beams. Appears to me this was not factory installed. Aftermarket kit maybe! Then see if your parking lights work. If parking lights don't work still and everything else works, replace the light switch $50 at the dealer. The switch works the fog lamps when you pull out the knob to turn on the fog lamps when the lights are turned on. When the fogs are on you will see a little amber light to let you know your fogs are on. When you switch to high beam the fog lamps go off. Again if its not working that way, then is wired wrong. Needless to say, there should be connectors in the harness of the lights for the fog lamps. Use those if possible with the kit that you can get at the dealer, or you can splice the connector with those blue splicing clips sold at the auto part store. Make sure ground is ground when splicing and water proof the connection sith silicone and tape.