Question about 1999 Lincoln Town Car

1 Answer

1999 lincon town car no power to fuel injector

I have a 1999 lincon town car there is no power to fuel injectors. I have changed the computer and reset the inertia how can I fix this?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Lincoln Master
  • 5,537 Answers

Sometimes a crankshaft sensor does not send the signal to fire either the spark or the fuel injectors. If the fuel pump relay is not getting power, the inertia sensor will not have power either. The inertia reset is just magnetic and does not depend on having power to reset.

You can check for current at the Inertia sensor and at the fuel pump relay. You can also have fuel pressure at the test port without the injectors working, which is the easiest test of all,

You need the sequential firing pulse for the injectors. Have you checked the EEC Relay?

Posted on Apr 26, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 306 Answers

SOURCE: 1999 lincoln town car no start

yes the teft light will stop the vehicle from running. that is the pats system and can cause all sorts of trouble. if the light flashes fast its not reading the key. no start. if it turns on for two seconds and shuts off the it should start

Posted on Feb 06, 2010

Testimonial: "very good thanks fast reply very helpful"

  • 373 Answers

SOURCE: Change a fuel filter on a 1989 Lincon Towncar

??? fuel filter is under chassis between front and back wheels. it has a plastic cover...........oooohhhh..........fuel filter is mounted in the frame on drivers side. two clips hold the lines on and a hose clamp holds the filter to the frame.

Posted on Apr 08, 2009

  • 373 Answers

SOURCE: Belt routing diagram for 1985 lincon town car.

The routing schematic for the serpentine belt is usually found on the fan shroud. But, if yours is missing you may contact your local lincoln dealer to see if they have the decal for that vehical or that engine.

Posted on Oct 31, 2009

  • 3489 Answers

SOURCE: 1998 Lincoln Town Car cranks but does not start.

possible just not probable. you need to see if there is any pressure to fuel rail. if not youre going to have to by pass the fuel pump and see if it is getting voltage. if so then apply a seperate voltage and ground wire to the pump to see if it kicks on. come to think of it, it could be the PATS system(security) that shuts down the system. it will crank but will not fire. your ford dealer will need to reprogram the system.

Posted on Nov 03, 2009

  • 61 Answers

SOURCE: im lock out of my car i need the factory code

you will probbably have to get someone with a kit to open doors most AAA drivers will be able to open doors. After that open trunk on hinge there shuold be a label with 5 numbers that will be your keypad code if it haqs not been changed.

Posted on Apr 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

With key on I have power to both wires on injector. it's NOT pulsing.

with the key on there should be 12volts to the injector. the other wire on the injector is the ground side and it is grounded by the computer when it receives a signal from the cam sensor to know when to fire, ground circuit, to activate the injector. you need to check the wire from the injector ground side to the computer for an open circuit. if its good then it may be an injector driver problem inside the computer.

Sep 12, 2015 | 1999 Lincoln Town Car

1 Answer

How do you remove a fuel injector on a "99 lincoln town car,

no for the injectors you need a special tool to remove the fuel lines

Oct 20, 2014 | 1999 Lincoln Town Car

1 Answer

1999 lincon town car no power to fuel injectors

My suggestion would be is to have your "fuel pump" checked. With the gas deposits etc, it can clog it up, or make the float stay stuck closed.

Apr 19, 2014 | 1999 Lincoln Town Car

1 Answer

No power to fuel injectors or fuel pump

check the wiring at the fuel pump to see if wire ma be loose or frayed

Apr 19, 2014 | 1999 Lincoln Town Car

2 Answers

Fuel injectors

Have you checked the inertia switch to make sure it was not tripped?

Apr 15, 2014 | Lincoln Town Car Cars & Trucks

1 Answer

Fuel injectors for 1997 lincoln town


You won the lottery

They aren't cheap or in need of
being replaced to resolve any issues

You can mail then away to be ultra
sonic cleaning & tested

Have to remove a few nuts & the fuel rail

If you have one failed injector, change that,
& do an on car cleaning with professional

Mar 12, 2013 | 1997 Lincoln Town Car

1 Answer

Blazer 1999 won't start got spark new fuel pump

Pull off one injector connector and use a test light or voltmeter to see if one wire has power with key on.
Power to the injectors is fed through the ignition switch, so with key on, you should have power there. The injector ground is inside the ECM. If you have power, you'll have to diagnose the circuit for why computer doesn't ground the circuit when it should.

Nov 06, 2011 | 1999 Chevrolet Blazer

1 Answer

The fuel injectors aren't opening. we have power to them and the crankshaft sensor and camshft sensor have been replaced. What tells the injectors to open? fuel pump is putting out 40psi at the fuel rail.

the computer gives the injector a signal to open and close check the plug to a injector 1 wire should have 12 volts all the time with key on and 1 should pulse a ground on and off when the engine is cranking over

Feb 18, 2010 | 1993 Lincoln Town Car

Not finding what you are looking for?
1999 Lincoln Town Car Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts


Level 3 Expert

76630 Answers


Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides