Question about 2005 Buick Rendezvous

Open Question

Remove rear coil springs

How to change rear spring

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 497 Answers

SOURCE: 1995 Buick Regal Rear Leaf Spring Insulator Kit -

the job is extremely hard unless you have all the tools and a hydraulic lift like all mechanic shops. the insulator should work. the springs do need removal to install the insulator kit. Find a good mechanic.

Posted on Aug 28, 2009

  • 1 Answer

SOURCE: AWD disable and anti-lock light is on after

check wires at plug and follow wiring under plastic casing. had similar problem after changing wheel bearing and found broken wire. spliced wire and lights are off now

Posted on Nov 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace rear springs on a 2001 Pontiac Montana?


images for 2001 Pontiac Montana rear springs ..

Replace broken rear coil spring on pontiac montana - Fixya

www.fixya.com/cars/t3213136-replace_broken_rear_coil_spring_pontiac
Oct 17, 2009 - replace broken rear coil spring on pontiac montana - Pontiac 2000 ...Im having problems with my rear lighs on my 2001 pontiac montana, the ...

Sep 22, 2015 | 2001 Pontiac Montana

1 Answer

How to replace rear coil springs on a pontiac 2005 g6


you will to support the rear lower control arm, remove the through bolt to the spindle, and the bolt at the rear cradle for the control arm, then lower the arm and the spring should come out.

May 07, 2014 | 2005 Pontiac G6

1 Answer

Hydrolic suspension is the ploblem so i want to change and i fixed coil spring and shockupsober. so how the coil spring and shockupsober to fixed the rand cruiser 100?


You can easily fit coil springs and struts at the rear. at the front you will have to also change the torsion arms for thicker ones. fit gas shocks front and rear.

Oct 29, 2013 | 2001 Toyota Land Cruiser

1 Answer

Replacing rear coil springs


You have to remove the struts from the car. Place the struts on a compression tower to relief pressure from spring. Once spring is compressed take of the top bolt on the strut which holds on the strut mount. After strut mount nut is off, loosen the springs tension and replace it with the new coil spring you are planning one using. Tighten the spring with mount back on and tighten bolt. then reinstall on car.

Jun 15, 2013 | 2004 Honda Accord

1 Answer

Replacing rear coil springs on toyota previa


Hi


Raise and support the vehicle

Remove the rear shock absorber

Push down on the lower control arm enough to allow the coil spring to slide out.

Remove the upper and lower insulators and check them to see if they need replacing.

I hope this helps

Cheers

Nov 29, 2012 | 1995 Toyota Previa

1 Answer

How to replace the rear shocks on a 1998 nissan maxima


REMOVE REAR SEAT AND PACKAGE SHELF TO GAIN ACCESS TO THE UPPER SHOCK ATTACHING NUTS.REMOVE UPPER ATTACHING NUTS. RAISE VECHICLE REMOVE REAR WHEEL AND SUPPORT THE LOWER CONTROL ARM WITH A JACK REMOVE LOWER SHOCK ABSORBER MOUNTING BOLT. REMOVE SHOCK ABSORBER ASSEMBLY FROM THE VECHICLE. COMPRESS THE COIL SPRING WITH THE PROPER SPRING COMPRESSOR TOOL. REMOVE CENTER RETAINING NUT HOLDING THE UPPER MOUNTING INSULATOR. SLOWLY DECOMPRESS THE COIL SPRING.REMOVE THE MOUNTING INSULATOR AND THE COIL SPRING. REMOVE THE COIL SPRING. TO INSTALL COMPRESSED COIL SPRING ONTO THE STRUT ASSEMBLY. BE SURE TO THE END OF THE SPRING IS IN THE NOTCH ON THE LOWER SEAT.INSTALL UPPER MOUNTING INSULATOR. YOU WILL NEW LOCKNUT FOR THE CENTER RETAINING NUT OF THE COIL SPRING. CENTER RETAINING NUT AND TORQUE THE NUT TO 13 TO 17 FT LBS. SLOWLY REMOVE THE SPRING COMPRESSOR TOOL. INSTALL SHOCK ABSORBER ASSEMBLY IN THE VECHICLE AND INSTALL THE MOUNTING FASTERNERS AND TORQUE LOWER MOUNTING BOLTS TO 72 - 87 FT LBS. INSTALL WHEEL.LOWER VECHICLE. WARNING COIL SPRING UNDER EXTREME LOADS WHEN COMPRESSED.BESURE TO PROPERLY ALIGN THE SPRING WITH THE COMPRESSING TOOL TO PREVENT PERSONAL INJURY FROM THE SPRING RELEASING UNEXPECTEDLY.

Feb 02, 2011 | 1998 Nissan Maxima

1 Answer

How do i change my struts help


  1. Remove the strut assembly.
    CAUTION Do not attempt to remove the coil spring from the strut without first compressing the coil spring with the appropriate tool.
  2. Install a suitable spring compressor to the coil spring and compress the spring until the spring tension is relieved from the spring seat.
  3. Remove the thrust bearing retainer nut.
  4. Remove the thrust bearing, spring seat and dust shield.
  5. Remove the coil spring from the strut.
  6. Remove the jounce bumper from the strut.
  7. Replace the coil spring or the strut as needed.

To install:
  1. Reinstall the jounce bumper to the strut.
  2. Position the coil spring to the strut.
  3. Compress the coil spring if removed from the spring compressor.
  4. Reinstall the dust shield, spring seat and thrust bearing.
  5. The coil spring must seat in the notch of the spring seat.
  6. Reinstall the thrust bearing retainer nut. Tighten the nut to 44 ft. lbs. (59 Nm).
  7. Install the strut assembly into the
you will need a strut spring compressor which cost about 50 bucks

Jan 20, 2010 | 2002 Mercury Cougar

1 Answer

Broken rear coil springs


You Need A STRUT TOOL to Compress Springs For Instalation onto Strut Assembly. With STRUT OUT Of Vehicle

Aug 07, 2009 | 1998 Ford Escort

1 Answer

How to change coil spring on 1994 ford ranger


RAISE AND SAFELY SUPPORT VECHICLE.PLACE A SUPPORT UNDER THE REAR AXLE.REMOVE NUTS AND BOLTS ATTACHING THE SHOCK ABSORBER TO THE RADIUS ARM.REMOVE THE NUT SECURING THE SPRING TO THE AXLE AND REMOVE THE RETAINER.SLOWLY LOWER THE AXLE TO RELIEVE THE SPRING TENSION.REMOVE THE SPRING BY ROTATING THE UPPER COIL OUT OF THE TABS IN THE UPPER SPRING SEAT - TO INSTALL.INSTALL. THE TOP OF THE SPRING IN THE UPPER SEAT.ROTATING INTO POSITION.RAISE THE AXLE UNTIL SPRING IS SEATED IN THE LOWER SPRING SEAT.INSTALL THE LOWER RETAINER AND TIGHTEN THE NUT TO 70 - 100 FT LBS .THEN CONNECT THE SHOCK ABSORBER TO THE RADIUS ARM AND LOWER THE VECHICLE.

Aug 01, 2009 | 1994 Ford Ranger Supercab

1 Answer

HOW TO CHANGE REAR COIL SPRINGS


Hi, you need to supend the body and detach the rear shckers in turn this will enable the suspension to come down lower then you should be able to remove your coil springs.
hope this helps you.

Jul 15, 2009 | 2002 Kia Sportage

Not finding what you are looking for?
2005 Buick Rendezvous Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...