Question about 2010 Chevrolet Captiva 2.0D
Chevy Captiva 2.0 litre turbo diesel 150 BHP km.52868 done. When we start vehicle there is stunning noise my be self starter noise and vibration on engine also instrument panel when switch on first all light will glow after few seconds all gets off (started) but this vehicle get started few seconds all lights on instrument panel gets on for period of few second(7) gets off can't able find out even battery was new all electrical circuit checked ok kindly surges what to do. thankiny very much
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2003 Chevy S10 won't start
Are you sure its the starter? did you try it in neutral? could be park neutral switch, or ignition switch, or if its a standard shift maybe it has a switch on clutch that it has to be depressed to start and its bad. As far as jump starting you cross the maine or big post on starter to small or little post on starter to do that, on a v6 starter it on the right side under exhaust manafold, and i think its on the same side on a 4 cyl.
Posted on Feb 10, 2009
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
Posted on Feb 17, 2009
Try under the dash, attached to colum is a switch that the rod goes into from your ignition key switch, that may need to be adjusted tword your steering wheel just a touch, they go out of alignmnet from time to time
Posted on Sep 15, 2009
Do a bench test on the starter. Remove starter, hook up a ground cable to starter, and positive to two prongs on starter and it should spin. You can do this in vechile too but not suggested due to risk of injury. If it doesn't spin, probally a solenoid or the starter it self. Unlikely but possible.
Posted on Jan 21, 2010
Tips for a great answer:
Mar 03, 2017 | Holden Cars & Trucks
Jan 22, 2017 | Kia Cars & Trucks
Jan 19, 2017 | Cars & Trucks
Dec 28, 2016 | Chevrolet Captiva Cars & Trucks
Nov 04, 2016 | Cars & Trucks
Apr 17, 2015 | Chevrolet Captiva Cars & Trucks
May 28, 2012 | 2007 Chevrolet Captiva 2.0
Jun 19, 2010 | Cars & Trucks
Jul 09, 2014 | 2010 Chevrolet Captiva 2.0D
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: