Question about 2000 Chevrolet S-10

Open Question

Popping oise my 2000 chevy s10 makes a popping sound when going over bumps

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Keith100881
  • 74 Answers

SOURCE: 1991 S10 blazer 4x4 4.3 popping coming from the front

the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Posted on Jun 23, 2009

Ad
  • 4340 Answers

SOURCE: aibag light stuck on (2000 s-10)

There are many pieces involved with this error. You need to pull the codes from the computer to know for sure.

There is a sensor, typically under the rad support, from bottom of vehicle, this component suffers road salt and moisture damage.... check it carefully and if corroded, replace the wiring harness stub also, so everything at the connection is new.

Doc

Posted on Sep 19, 2009

  • 74 Answers

SOURCE: 1990 chevy s10 blazer 4wd. Xmsn whines.

if this happens only in the morning after you start for the first time its the clutch on the fanblade needs replacing

Posted on Dec 02, 2009

SOURCE: Have an Chevy 2000 S10 with parking brake issues.

Get under the veh and check out ,the rusted parking brake cables

Posted on Feb 19, 2010

  • 68 Answers

SOURCE: 2000 chevy s10 ex cab 2wd has leaky lines by

These are oil cooler lines and there are 2 sets of 2 and should be replaced, Fairly easy but messy. If one blows apart you run the risk of causing severe engine damage.

Posted on Mar 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a vacuum hose diagram for 2000 Chevy S10 2.2 from the top of the Intake Manifold


https://www.bing.com/images/search?q=i+need+a+vacuum+hose+diagram+for+2000+chevy+s10+2.2+from+the+top+of+the+intake+manifold&qpvt=i+need+a+vacuum+hose+diagram+for+2000+chevy+s10+2.2+from+the+top+of+the+intake+manifold

Sep 04, 2017 | Cars & Trucks

1 Answer

Tranny went out as I hit bump on s10 4x4 .chevy 2000 model.is there electrical chips that would make tranny not turn?


more than likely a faulty wiring connection that has lost contact from the bump. Check all connections in the wiring and switches for corrosion and dirt.

Nov 12, 2014 | Cars & Trucks

1 Answer

Where is the ac low pressure port located on a 2000 chevy s10?


It's the port on the accumulator. The silver tank attached to your fan box. The low side of your a/c system is always going to be the larger hose.

Jun 17, 2014 | 2000 Chevrolet S-10

1 Answer

Rear tire makes a cracking/popping sound when going over speed bumps


Sounds more like its one of the many bonded rubber bushings on the rear suspension is giving up.
While someone is looking at that get them to check the rear hub/bearing.

May 19, 2014 | 2000 Mitsubishi Mirage

1 Answer

I HAVE A 2000 S10 CHEVY REPLACED CATALYTIC CONVERTER COIL PACKS FUEL FILTER SPARK PLUGS AND WIRESS HEARD A POP DROVE 30 MILES OK THEN TURNED IT OFF AND WHEN I DID IT WAS RUNNING ROUGH WITH NO POWER IN 3RD...


code is 02 sensor circuit issue-probly shud inspec area of cinverter -thats where sensor is-dont keep replacin parts till u kno the solution--may be also an egr valve or fuel system thing --trans may need servicin

Aug 04, 2011 | 2000 Chevrolet S-10

2 Answers

Spark plug order to distributor


For a 1985 Chevy S10 with a 2.8L engine the firing order is: 1-2-3-4-5-6 The Distributor rotation is clockwise.Take off the cap and bump engine till the rotor points to the no. 1 plug. this is the no.1 contact on the cap. follow rotation around the cap in order. {ie. 2,3,4 ect.} hope this helps.

Oct 12, 2009 | 1985 Chevrolet Chevy

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front


the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Jun 23, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

2000 Chevy s10 starting problem


Check the ignition and Engine relay switches located under the hood. Sometimes relays go weak with age and even a bump on the road will shut them off. If you can turn the truck on, take it to Autozone or similar store for a free DTC scan code.

Jan 09, 2009 | 2000 Chevrolet S-10

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...