Question about 2001 BMW 325
Yes you can but its located on the engine side or you can get access through the dashboard or engine bay which ever looks easier its buried in there you must do alot of parts removing till you get to it almost entire removal of the dashboard to get to it. And if you do make sure you take alot of pictures as your taking apart so you can remember how to put it back together
Posted on Sep 26, 2009
Yes the fan motor can be changed and this can be done by the firewall.
Posted on Jul 23, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Radiator removal BMW 316i
hi, the two clamps that secure the radiator have a small slot on the top, if you insert a small screwdriver into the slot and use it as a pry bar you should be able to unclip the holding clamp and it then releases like a hinge.
Posted on Feb 24, 2009
SOURCE: bmw 316i
hi markjones, the ignition switch can usually be removed without too much disassembly. First you will need to remove a plastic screw in the upper and lower trim covers. Seperate the covers. You should see a black plastic ring around the mechanical switch. gentley remove the ring. Next remove the rubber o-ring/band. With the key in the iginition and turned to almost to position 1, insert a heavy duty paper clip, or bmw special tool (about $30 from the dealer) into the small hole in the switch. There is a cam in the hole that needs to be twisted clockwise so the cylinder can be removed. When installing a new switch make sure to remove the little tab pice of metal that usually breaks off in the housing. Also be sure to make sure and reinstall the rubber ring/band because they are part of the ews system. If you key turns continuously, or is not able to be removed, the ignition housing and cylinder both will need replaced. Replacing the lock housing is about a 2 hour sequence and can be challenging. I would recommend a shop for that kind of repair.
Posted on Apr 22, 2009
SOURCE: bmw 316i overheating
check if the water is circulating as you might have a blockage in the header tank. this can be checked by opening the radiator cap and check if the water is circulating on top.
Posted on Jul 28, 2009
Tips for a great answer:
May 08, 2015 | 1998 BMW 316i
Jan 18, 2015 | 1994 BMW 316i
Oct 21, 2014 | 1993 BMW 316i
Jun 17, 2017 | BMW 316i Cars & Trucks
Jan 28, 2010 | 1994 BMW 3 Series
Jul 08, 2009 | 1996 BMW 318
Jun 21, 2009 | 1996 BMW 318
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: