Question about 2002 Isuzu Rodeo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 92 Isuzu Rodeo Power loss
Do you have the v 6 or the 4 cyl.?
You may want to check the cap and rotor, and check to make sure all elctrical connections and vacuum hoses are tight and in good condition. Then go from there.
Posted on Jul 19, 2008
SOURCE: 2002 isuzu rodeo won't start
the clutch switch is located on the clutch pedal support, if you put your hand on the clutch pedal run your hand up and the switch will be at the top. now if you are going to replace this switch I would try to adjust the switch first the amount of time it takes and this would confirm that it's the switch. ensure clutch pedal is fully returned, disconnect the electrical connector from the switch. loosen lock nut and tighten clutch switch by hand until switch is firmly against clutch lever. back the switch out 1/2 turn, the switch plunger should extend .02-.06" (.5-1.5 mm).
hope this helps
Posted on Jul 13, 2009
SOURCE: 2002 2.2l p0300
that code is for a multiple or random missfire.i would check or just replce if its been awhile the spark plugs and wires fuel filter also if its been awhile
Posted on Mar 21, 2010
Tips for a great answer:
Oct 30, 2015 | Isuzu Rodeo Cars & Trucks
Oct 30, 2015 | 2002 Isuzu Rodeo
Mar 30, 2013 | 2002 Isuzu Rodeo Sport
Sep 10, 2012 | 2002 Isuzu Rodeo
Jul 09, 2011 | 2002 Isuzu Rodeo
2.2L VIN D engine Firing order: 1-3-4-2 Distributorless ignition system
May 12, 2011 | 2002 Isuzu Rodeo
May 19, 2010 | 2002 Isuzu Axiom
Nov 29, 2009 | 2002 Isuzu Rodeo
May 30, 2009 | 2002 Isuzu Rodeo
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: