Question about 2005 Toyota Tacoma

Open Question

How to replace 2009 toyota venza right rear speed sensor

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7353 Answers

SOURCE: How do I replace the right rear wheel ABS speed

it should just have 1 bolt holding it in. easy to replace. look at the end of the axle for a 2 wire sensor.

Posted on Sep 26, 2009

Testimonial: "Good, quick answer. Thank you."

  • 7353 Answers

SOURCE: How do I turn off tire pressure sensor warnning

set the tire pressure to the door decal, check all the tires, including the spare.

Posted on Oct 15, 2009

  • 12 Answers

SOURCE: I want to install Toyota OEM remote starter to my 2009 Venza.

Do not install the OEM starter - it only works from about 80 feet away and is quite problematic. I just purchased a new V6-AWD with the push button start and the dealer is taking the OEM start out as we speak and taking it for an after market starter.

If you decide to do it yourself (you'll need to be quite mechanically inclined for this install), check youtube as the poster above has suggested - but again I highly suggest you consider an aftermarket starter and save the money that I didn't.

Posted on Jan 18, 2010

  • 1 Answer

SOURCE: 2009 TOYOTA VENZA MAINTENANCE REQUIRED LIGHT

I finally found the solution. It is actually detailed in the owner's manual but you really have to hunt for it. Look at page 450/451.

Step 1: Switch the display to the trip meter A with the engine running.

Step 2: Turn the engine off (but don't turn the key all the way to where you can remove it from the ignition).

Step 3: While pressing the trip meter reset button, turn the key to IGNITION ON (but don't start the engine). Continue to press and hold the trip meter reset button until the trip meter displays "000000".


Posted on Mar 14, 2010

  • 2 Answers

SOURCE: does the 2009 Toyota Venza have a timing belt or

It has a chain, 1 that goes around the VVT on each side then a main chain that goes to the crank sprocket

Posted on May 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 toyota venza Back door (trunk) won't open with key, nor inside push button. just beeps.


Perhaps you need a trip to a dealer . sounds like you have tried all options but that one .

May 28, 2016 | 2009 Toyota Venza

1 Answer

Give me a picture of a 2009 Toyota Venza where the air filter is in the glove compartment


I assume you mean the air conditioning filter, if so, please refer to the attached figures.

24968013-1djpi0kr3wlqamijliksftzb-4-0.jpg

24968013-1djpi0kr3wlqamijliksftzb-4-2.jpg

24968013-1djpi0kr3wlqamijliksftzb-4-5.jpg

Aug 17, 2014 | 2009 Toyota Venza

1 Answer

No Power to rear door


There is an off switch on the left side dash. This could be it. Make sure it is not pressed in. If it is ok. Remove switch and check power at this switch.

Apr 10, 2014 | 2009 Toyota Venza

1 Answer

How to replace 2009 toyota venza hood latch


accident damage?
are you sure it's the latch?
the cable coming off the handle under the dash is common.

Apr 14, 2013 | 2009 Toyota Venza

1 Answer

2011 venza rear gate power release not working


There is an override switch just to the left of the change compartment near the drivers left hand. It is easy to activate the override accidentally. Just release the override.

Jan 24, 2013 | 2009 Toyota Venza

3 Answers

My Totota Venza's tire pressure light keep coming on very 6 weeks after driving it for a year. Only have 10K miles after 1 1/2 years. I have taken it back to dealer three times and will be a fourth...


No car defect - there is a normal amount of wear on your tires after 10K miles, and
one (or more) of the tires are starting to leak air just a little bit - which after 1.5 years and
10K miles is entirely expected.
What's happening is that the TPMS (Tire Pressure Management System) sensors (one in each tire)
are sending info to the car's computer telling it that there is low air in at least one tire.
To the TPMS, "low air" means a drop in air pressure of just a few percent (set by the
manufacturer). A drop in pressure in just one tire will light the dashboard light.
The spare (temporary) tire is not monitored by the TPMS, and typically carries a pressure
of 60 PSI.
According to http://www.safercar.gov (NHTSA), a normal tire will lose as much as 1.5 PSI
per month as air escapes the tire and rim naturally.
The 2009 Toyota Venza utilizes the "direct" TPMS system (as opposed to the indirect), which is
explained by the Wikipedia article at http://en.wikipedia.org/wiki/TPMS

If you or dealer suspect the TPMS sensor(s) in one or more tires, they can be purchased on the aftermarket from sites like www.rockauto.com, www.carpartsdiscount.com, et.al. After the new TPMS sensor(s) are installed,
you (or your garage),must re-teach the TPMS system its new sensors using the following procedure: (1) let the car sit stationary on its wheels (not lifted) for at least 20 minutes, then
test drive the car for at least 10 minutes at a continuous speed of 15 MPH or greater. During the
test drive, the TPMS dashboard light should go out.

For 2009 Toyota Venza recalls, visit
http://www.autorecalls.us/aut-03/recalls/2009/toyota/venza/index.html

Jun 27, 2011 | 2009 Toyota Venza

1 Answer

I cannot locate any reset button for the tire pressure sensor anywhere, including inside the glove box. I have a 2009 Venza. Is there one? Where? Thanks!


this is newly vehicle, but other models do not have a reset button is an auto reset after you star driving, if your tire press drops below 30psi it will turn lite on, so make sure your tires are inflated at 40psi also check spare tire it may have a 4 or 5 sensor system, no look......a bad sensor may be the cost, have a tire been fix lately? take it back they broke a sensor.

Oct 02, 2010 | 2009 Toyota Venza

1 Answer

The multi information display prewired for a backup camera? Toyota venza 2009 v6


yes, but if installed it only works in reverse. When remove from reverse it goes back to display

Mar 24, 2010 | 2009 Toyota Venza

1 Answer

How do I turn off tire pressure sensor warnning light 2009 toyota venza


set the tire pressure to the door decal, check all the tires, including the spare.

Oct 15, 2009 | 2009 Toyota Venza

Not finding what you are looking for?
2005 Toyota Tacoma Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...